IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
16 JUNE 2011

Approved PARs for New Standards

  • P1888.1 (BOG/CAG) Standard for a Ubiquitous Community Network: Control and Management
  • P1888.2 (BOG/CAG) Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and Scalability
  • P1888.3 (BOG/CAG) Standard for Ubiquitous Green Community Control Network: Security
  • P802.16.1 (C/LM) Standard for WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems
  • P24774 (C/S2ESC) Guide for Adoption of ISO/IEC TR 24774, Systems and Software Engineering - Life Cycle Management - Guidelines for Process Description
  • P844.1 (IAS/PCI) Standard for the Construction, Testing, and Marking for Skin Effect Heating Systems for Pipelines and Vessels
  • P844.2 (IAS/PCI) Standard for the Construction, Testing, and Marking for Impedance, Induction, and Induction Susceptor Heating Systems for Pipelines and Vessels
  • P844.3 (IAS/PCI) Recommended Practice for Electrical Impedance, Induction and Skin Effect Heating Systems for Pipelines and Vessels
  • P3004.7 (IAS/TBCC) Recommended Practice for the Protection of Power Cables and Busway Used in Industrial and Commercial Power Systems
  • P3004.9 (IAS/TBCC) Recommended Practice for the Protection of Power Transformers Used in Industrial and Commercial Power Systems
  • PC37.13a (PE/SWG) Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below
  • PC57.19.04 (PE/TR) Standard Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated Continuous Current in Excess of 5000 A in Bus Enclosures
  • PC57.156 (PE/TR) Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
  • P1505.3 (SCC20) Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1505™ Receiver Fixture Interface Standard
  • P1671.0 (SCC20) Guide for the Use of Automatic Test Equipment Markup Language (ATML); the IEEE 1671™ Family of Standards.
  • P1871.1 (SCC20) Recommended Practice for Using IEEE 1671.2™ Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters
  • P1871.2 (SCC20) Recommended Practice for IEEE 1671 Test Equipment Templates and Extension Classes for Describing Intrinsic Signal Path Information for Cables, Interface Adaptors and Test Equipment
PARs for the Revision of Standards
  • P802.3.1 (C/LM) Standard for Management Information Base (MIB) Definitions for Ethernet
  • P463 (IAS/PCI) Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • P1415 (PE/EM) Guide for Induction Machinery Maintenance Testing and Failure Analysis
  • PC50.13 (PE/EM) Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
  • PC37.63 (PE/SWG) Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
  • PC57.12.00 (PE/TR) Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • PC57.12.90 (PE/TR) Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • PC57.139 (PE/TR) Guide for Dissolved Gas Analysis in Transformer Load Tap Changers

Modified PARs

  • P15026-2 (C/S2ESC) Standard - Adoption of ISO/IEC 15026 -Systems and Software Engineering - Systems and software assurance - Part 2: Assurance case
  • P3004.1 (IAS/TBCC) Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems
  • P21451-7 (IM/TC9 Senor technology) Standard for Information Technology - Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
  • P1717 (PE/IC) Standard for Testing Circuit Integrity Cables Using A Hydrocarbon Pool Fire Test Protocol
  • P1816 (PE/IC) Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories
  • P62582-3 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and control important to safety – Electrical equipment condition monitoring methods - Part 3: Elongation at break
  • PC62.22a (PE/SPDHV) Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems Amendment: Supplement to consider energy handling capabilities
  • P62271-37-082 (PE/SWG) Standard for High-voltage switchgear and controlgear - Part 37-082: Measurement of sound pressure levels on alternating current circuit-breakers
  • PC37.17 (PE/SWG) Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers
  • PC57.152 (PE/TR) Guide for Diagnostic Field Testing of Fluid Filled Power Transformers, Regulators, and Reactors
  • P1609.0 (VT/ITS) Guide for Wireless Access in Vehicular Environments (WAVE) – Architecture
  • P1609.12 (VT/ITS) Standard for Wireless Access in Vehicular Environment (WAVE) - Identifier Allocations
  • P1653.6 (VT/RT) Recommended Practice for Grounding of Direct Current Equipment Enclosures in Traction Power Distribution Facilities

New Standards

  • P802.1Qaz (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic Classes
  • P802.1Qbb (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment: Priority-based Flow Control
  • P802.1Qbc (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment: Provider Bridging - Remote Customer Service Interfaces
  • P802.1Qbe (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment: Multiple Backbone Service Instance Identifier (I-SID) Registration Protocol (MIRP)
  • P802.3bd (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: MAC Control Frame for Priority-based Flow Control
  • P802.15.7 (C/LM) Standard for Short-Range Wireless Optical Communication Using Visible Light
  • P802.22 (C/LM) Standard for Wireless Regional Area Networks Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
  • P1474.4 (VT/RTSC) Recommended Practice for Functional Testing of a Communications-Based Train Control (CBTC) System
  • P1547.4 (SASB/SCC21) Guide for Design, Operation, and Integration of Distributed Resource Island Systems with Electric Power Systems
  • P1692 (PE/PSC) Guide for the Protection of Communication Installations from Lightning Effects
  • P1734 (C/DA) Standard for Quality of Electronic and Software Intellectual Property used in System and System on Chip (SoC) Designs
  • P1786 (PE/NPE) Human Factors Guide for Applications of Computerized Operating Procedure Systems at Nuclear Power Generating Stations and other Nuclear Facilities
  • P1900.4a (COM/SC) Standard for Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks - Amendment: Architecture and Interfaces for Dynamic Spectrum Access Networks in White Space Frequency Bands
  • P11073-30200a (EMB/11073) Standard for Health Informatics - Point-of-Care Medical Device Communication - Part 30200: Transport Profile - Cable Connected - Amendment 1
  • PC37.238 (PE/PSR) Standard Profile for Use of IEEE Std. 1588 Precision Time Protocol in Power System Applications

Revision Standards

  • P515 (IAS/PCI) Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
  • P802.15.4 (C/LM) Standard for Local and Metropolitan Area Networks Part 15.4: Low Rate Wireless Personal Area Networks (LRWPANs)
  • P1303 (PE/SUB) Guide for Static Var Compensator Field Tests
  • P1647 (C/DA) Standard for the Functional Verification Language e
  • PC57.12.20 (PE/TR) Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34 500 Volts and Below; Low Voltage, 7970/13 800Y Volts and Below
  • PC57.135 (PE/TR) Guide for the Application, Specification and Testing of Phase Shifting Transformers
  • P21451-7 (IM/ST) Information Technology - Smart Transducer Interface for Sensors and Actuators - Part 7: Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

Reaffirmations

  • 1-2000 (R2005) (SASB/SCC04) IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for Evaluation of Electrical Insulation
  • 649-2006 (PE/NPE) IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
  • 845-1999 (PE/NPE) IEEE Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations 1450-1999 (C/TT) IEEE Standard Test Interface Language (STIL) for Digital Test Vector Data
  • 1450.1-2005 (C/TT) IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450™ -1999) for Semiconductor Design Environments
  • 1450.6-2005 (C/TT) IEEE Standard Test Interface Language (STIL) for Digital Test Vector Data - Core Test Language (CTL)
  • 1547.1-2005 (SASB/SCC21) IEEE Standard for Conformance Tests Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems
  • C57.146-2005 (PE/TR) IEEE Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers