14/17 February 2017

IEEE SA Standards Board Approvals

14/17 February 2017

New PARs

  • P802.1CS (C/LM) Standard for Local and Metropolitan Area Networks — Link-local Registration Protocol
  • P7003 (C/S2ESC) Algorithmic Bias Considerations
  • P21839 (C/S2ESC) Systems Engineering – Systems of Systems Considerations in Engineering of Systems
  • P1752 (EMB/Stds Com)Standard for Mobile Health Data
  • P2717 (EMC/SDCom) Passive Intermodulation Test Methods for Wireless Systems in Low Noise Environments
  • P2718 (EMC/SDCom) Guide for Near Field Characterization of Unintentional Stochastic Radiators
  • P2452 (IM/TET) Standard for the Performance of Lidar Used in Traffic Speed Measurements
  • P2775 (PE/ED&PG) Technical Guide for Smart Hydroelectric Power Plant
  • P97 (PE/EM) Diagnostic Test Methods for testing the Insulation of AC Electric Machinery Using Direct Voltage
  • P400.5 (PE/IC) Guide for Field Testing of Shielded DC Power Cable Systems Using High Voltage Direct Current (HVDC)
  • P1186 (PE/IC) Recommended Practice for Applicability of Methods for the Evaluation of Low Voltage and Medium Voltage Installed Cable Systems in Nuclear Facilities
  • P2776 (PE/IC) Guide for Specifying and Selecting Cables for Nuclear Facilities
  • PC57.32a (PE/TR) Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices Amendment: Neutral Grounding Resistor Section
  • PC57.165 (PE/TR) Guide for Temperature Measurements for Liquid Immersed Transformers and Reactors
  • P1872.1 (RAS/SC) Robot Task Representation
  • P2751 (RAS/SC) 3D Map Data Representation for Robotics and Automation

PARs for the Revision of Standards

  • P802.1AR (C/LM) Standard for Local and Metropolitan Area Networks – Secure Device Identity
  • P802.16 (C/LM) Standard for Air Interface for Broadband Wireless Access Systems IEEE
  • P1128 (EMC/SDCom) Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 40 GHz
  • P1349 (IAS/PCI) Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations
  • P62.2 (PE/EM) Guide for Diagnostic Field Testing of Electric Power Apparatus – Electrical Machinery
  • P1184 (PE/ESSB) Guide for Batteries for Uninterruptible Power Supply Systems
  • P1375 (PE/ESSB) Guide for the Protection of Stationary Battery Systems
  • P400.1 (PE/IC) Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC)
  • P592 (PE/IC) Standard for Semiconducting Shields on Medium-Voltage (15kV – 35kV) Cable Joints and Separable Connectors
  • P572 (PE/NPE) Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities
  • PC37.48 (PE/SWG) Guide and Tutorial for the Application of High-Voltage (> 1000 V) Fuses and Accessories
  • P1277 (PE/TR) Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
  • PC57.12.00 (PE/TR) Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • PC57.143 (PE/TR) Guide for Application of Monitoring Equipment to Liquid-Immersed Transformers and Components
  • PC95.2 (SASB/SCC39) Standard for Radio-Frequency Energy and Current-Flow Symbols
  • P1474.1 (VT/RTSC) Standard for Communications-Based Train Control (CBTC) Performance and Functional Requirements

Modified PARs

  • P3333.2.2 (C/SAB) Standard for Three-Dimensional (3D) Medical Visualization
  • P3333.2.3 (C/SAB) Standard for Three-Dimensional (3D) Medical Data Management
  • P3333.2.4 (C/SAB) Standard for Three-Dimensional (3D) Medical Simulation
  • P3333.2.5 (C/SAB) Standard for Bio-CAD File Format for Medical Three-Dimensional (3D) Printing
  • P1210 (PE/IC) Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
  • PC37.20.9 (PE/SWG) Metal Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulation Systems

Withdrawn PARs

  • P11073-10419-2015/Cor 1 (EMB/11073) Health Informatics – Personal Health Device Communication – Part 10419: Device Specialization – Insulin Pump Corrigendum 1
  • P11073-10425-2014/Cor 1 (EMB/11073) Health Informatics – Personal Health Device Communication – Part 10425: Device Specialization – Continuous Glucose Monitor (CGM) – Corrigendum 1

New Standards

  • 1899 (BOG/CAG) IEEE Guide for Establishing Basic Requirements for High-Voltage Direct Current (HVDC) Transmission Protection and Control Equipment
  • 1800.2 (C/DA) IEEE Standard for Universal Verification Methodology Language Reference Manual
  • 802.1AEcg (C/LM) IEEE Standard for Local and Metropolitan Area Networks – Media Access Control (MAC) Security – Amendment 3: Ethernet Data Encryption Devices
  • 802.1AX-2014/Cor 1 (C/LM) IEEE Standard for Local and Metropolitan Area Networks – Link Aggregation – Corrigendum 1: Technical and Editorial Corrections
  • 802.1Qci (C/LM) IEEE Standard for Local and Metropolitan Area Networks – Bridges and Bridged Networks Amendment: Per-Stream Filtering and Policing
  • 802.3bv (C/LM) IEEE Standard for Ethernet Amendment 9: Physical Layer Specifications and Management Parameters for 1000 Mb/s Operation Over Plastic Optical Fiber
  • 802.15.3e (C/LM) IEEE Standard for Information Technology – Local and Metropolitan Area Networks – Specific Requirements – Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Amendment: High-Rate Close Proximity Point-to-Point Communications
  • 802.15.4t (C/LM) IEEE Standard for Low-Rate Wireless Networks – Amendment: Higher Rate (2 Mb/s) Physical (PHY) Layer
  • 802.15.10 (C/LM) IEEE Recommended Practice for Routing Packets in 802.15.4 Dynamically Changing Wireless Networks
  • 802.21.1 (C/LM) IEEE Standard for Local and Metropolitan Area Networks Part 21.1: Media Independent Services
  • 802d (C/LM) IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture – Amendment: Allocation of Uniform Resource Name (URN) Values in IEEE 802 Standards
  • 2402 (IM/ST) IEEE Standard Design Criteria of Complex Virtual Instruments for Ocean Observation
  • 1591.2 (PE/PSC) IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
  • C93.3 (PE/PSC) IEEE Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
  • C62.55 (PE/SPDLV) IEEE Guide for Surge Protection of DC Power Feeds to Remote Radio Heads (RRH)
  • 430 (PE/T&D) IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations
  • 1829 (PE/T&D) IEEE Guide for Conducting Corona Tests on Hardware for Overhead Transmission Lines and Substations
  • 1887 (VT/RTSC) IEEE Guide for Wayside Energy Storage System Guide for DC Traction Applications

Revision Standards

  • 15939 (C/S2ESC) ISO/IEC/IEEE Standard – Systems and Software Engineering – Measurement Process
  • 802.21 (C/LM) IEEE Standard for Local and Metropolitan Area Networks – Part 21: Media Independent Services Framework
  • 1904.1 (COM/SDB) IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)
  • C62.92.2 (PE/SPDHV) IEEE Guide for the Application of Neutral Grounding In Electrical Utility Systems Part II – Synchronous Generator Systems
  • C57.120 (PE/TR) IEEE Guide for Loss Evaluation of Distribution and Power Transformers and Reactors

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.