IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
10 December 2014

New PARs

  • P1800.2 (C/DA) Standard for Universal Verification Methodology Language Reference Manual
  • P802.1AS-2011/Cor 2 (C/LM) Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks - Corrigendum 2: Technical and Editorial Corrections
  • P802.3bv (C/LM) Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 1000 Mb/s Operation Over Plastic Optical Fiber
  • P802.3by (C/LM) Standard for Ethernet Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 25 Gb/s Operation
  • P1363.3-2013/Cor 1 (C/MSC) Standard for Identity-Based Cryptographic Techniques Using Pairings - Corrigendum 1: Corrections to Citations
  • P15026-3 (C/S2ESC) Adoption of Systems and software engineering -Systems and software assurance -- Part 3: Systems integrity levels
  • P1680.6 (C/SAB) Standard for Environmental Assessment of Complex Set Top Boxes
  • P1857.7 (C/SAB) Standard for Adaptive Streaming
  • P1904.3 (COM/SDB) Standard for Radio Over Ethernet Encapsulations and Mappings
  • P1911.1 (COM/SDB) HDBaseT Specification Version 1.1.0
  • P1911.2 (COM/SDB) HDBaseT Specification Version 2.0
  • P1911.3 (COM/SDB) Standard for HDBaseT 5Play
  • P11073-10702 (EMB/11073) Standard for Domain Information & Service Model for Service-Oriented Point-of-Care Medical Device Communication
  • P11073-20601-2014/Cor 1 (EMB/11073) Health Informatics - Personal Health Device Communication - Part 20601: Application Profile- Optimized Exchange Protocol - Corrigendum 1
  • P11073-20701 (EMB/11073) Standard for Service-Oriented Medical Device Exchange Architecture & Protocol Binding
  • P11073-20702 (EMB/11073) Standard for Medical Devices Communication Profile for Web Services
  • P1847 (EMB/Stds Com) Recommended Practice for Common Framework of Location-Based Services (LBS) for Healthcare
  • P1514 (SASB/SCC20) Recommended Practice for the Design and Integration of Fixtures Applied to Generic Test Interfaces of Automatic Test Systems

PARs for the Revision of Standards

  • P802.1AB (C/LM) Standard for Local and Metropolitan Area Networks - Station and Media Access Control Connectivity Discovery
  • P802.15.7 (C/LM) Standard for Short-Range Wireless Optical Communication
  • P11073-10417 (EMB/11073) Health Informatics - Personal Health Device Communication Part 10417: Device Specialization - Glucose Meter
  • P1202 (PE/IC) Standard for Testing Flame-Propagation and Smoke Generation of Cable or Splices/Connectors
  • P1613.1 (PE/SUB) Standard Environmental and Electromagnetic Compatibility (EMC) Testing Requirements for Intelligent Electronic Devices (IEDs) Installed in Transmission and Distribution Facilities
  • PC37.2 (PE/SUB) Standard Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
  • PC37.12 (PE/SWG) Guide for Specifications of High-Voltage Circuit Breakers (Over 1000 Volts)
  • PC37.13.1 (PE/SWG) Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage (1000 Vac and Below) Power Circuit Breaker Switchgear
  • PC57.129 (PE/TR) Converter Transformers for HVDC Applications
  • P1547.1 (SASB/SCC21) Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces
  • P1609.2 (VT/IT) Standard for Wireless Access in Vehicular Environments - Security Services for Applications and Management Messages
  • P1609.3 (VT/IT) Standard for Wireless Access in Vehicular Environments (WAVE) - Networking Services

Modified PARs

  • P3005.4 (IAS/TBCC) Recommended Practice for Design and Operational Considerations for Improving the Reliability of Emergency and Stand-By Power Systems
  • P62659 (NTC/SC) Standard for Large Scale Manufacturing of Nanoelectronics
  • P1402 (PE/SUB) Guide for Physical Security of Electric Power Substations
  • P60076-16 (PE/TR) Power Transformers - Part 16: Transformers for Wind Turbine Application
  • PC57.12.59 (PE/TR) Guide for Dry-Type Transformer Through-Fault Current Duration
  • PC57.153 (PE/TR) Guide for Paralleling Regulating Transformers
  • PC57.157 (PE/TR) Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid Filled Transformers
  • P61014 (RS/SC) Standard for Programmes for Reliability Growth
  • P62704-3 (SASB/SCC39) Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz Part 3: Specific Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations of Mobile Phones

Withdrawn PARs

  • P11073-10201 (EMB/11073) Standard for Health Informatics - Point-of-Care Medical Device Communication - Domain Information Model
  • P11073-10413 (EMB/11073) Standard for Health Informatics - Personal Health Device Communication - Device Specialization - Respiration Rate Monitor
  • P11073-10417a (EMB/11073) Health Informatics - Personal Health Device Communication Part 10417: Device Specialization - Glucose Meter Amendment 1
  • P3005.3 (IAS/TBCC) Recommended Practice for the Application of Stored-Energy Systems for Use in Emergency and Stand-By Power Systems
  • PC57.13-2008/Cor 1 (PE/TR) Standard Requirements for Instrument Transformers - Corrigendum 1: Figure 3 Correction
  • PC57.121a (PE/TR) Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Insulating Liquid in Transformers: Amendment a
  • PC57.136 (PE/TR) Guide for Sound Level Abatement and Determination for Liquid-Immersed Power Transformers and Shunt Reactors Rated Over 500 kVA
  • P1704 (SASB/SCC31) Standard for Utility Industry End Device Communications Module

Administratively Withdrawn PARs

  • P1817 (C/MSC) Standard for Consumer-Ownable Digital Personal Property
  • P1828 (C/S2ESC) Standard for Systems with Virtual Components
  • P1680.5 (C/SAB) Standard for Environmental Assessment of Mobile Devices
  • P1149.1.1 (C/TT) Standard for Test Access Port Interface for Connection to Test Data Registers
  • P1820 (DEI/SC) Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions
  • P1451.5-2007/Cor 1 (IM/ST) IEEE Standard for a Smart Transducer Interface for Sensors and Actuator - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats - Corrigendum 1
  • P1289 (PE/NPE) Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations and Other Nuclear Facilities
  • PC62.62a (PE/SPDLV) IEEE Standard for a Smart Transducer Interface for Sensors and Actuator - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats - Corrigendum 1
  • PC37.2a (PE/SUB) IEEE Standard for a Smart Transducer Interface for Sensors and Actuator - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats - Corrigendum 1
  • P519.1 (PE/T&D) Guide for Applying Harmonic Limits on Power Systems

New Standards

  • 1735 (C/DA) Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP)
  • 802.1Xbx (C/LM) Standard for Local and Metropolitan Area Networks - Port-Based Network Access Control Amendment 1: MAC Security Key Agreement Protocol (MKA) Extensions
  • 15288.1 (C/S2ESC) Standard for Application of Systems Engineering on Defense Programs
  • 15288.2 (C/S2ESC) Standard for Technical Reviews and Audits on Defense Programs
  • 3006.5 (IAS/TBCC) Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems
  • 1812 (PE/EM) Trial-Use Guide for Testing Permanent Magnet Machines
  • C37.240 (PE/PSR) Standard for Cyber Security Requirements for Substation Automation, Protection and Control Systems
  • 1835 (PE/T&D) NACE/IEEE Joint Standard for Atmospheric (Above-Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
  • 1839 (PE/T&D) Standard for Below-Grade Corrosion Control of Transmission, Distribution, and Substation Structures by Coating Repair Systems
  • 1895 (PE/T&D) Standard for Below-Grade Inspection and Assessment of Corrosion on Steel Transmission, Distribution, and Substation Structures
  • 1871.1 (SASB/SCC20) Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters
  • 1609.3-2010/Cor 2 (VT/ITS) Standard for Wireless Access in Vehicular Environments (WAVE) – Networking Services - Corrigendum 2: Correct Identified Errors
  • 1609.4-2010/Cor 1 (VT/ITS) Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation - Corrigendum 1: Correct Identified Errors
  • 1642/Draft 10 (EMC/SDCom) Recommended Practice for Protecting Public Accessible Computer Systems from Intentional EMI
  • 1905.1a/Draft 2 (COM/PLC) Standard for a Convergent Digital Home Network for Heterogeneous Technologies Amendment 1: Support of New MAC/PHYs and Enhancements

Revision Standards

  • 802.1AX (C/LM) Standard for Local and Metropolitan Area Networks - Link Aggregation
  • C37.114 (PE/PSR) Guide for Determining Fault Location on AC Transmission and Distribution Lines
  • C57.13.3 (PE/PSR) Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
  • C62.92.4 (PE/SPDHV) Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV – Distribution
  • C37.11 (PE/SWG) Standard Requirements for Electrical Control for AC High-Voltage (>1000V) Circuit Breakers
  • C37.74 (PE/SWG) Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
  • 1566/Draft P1566_D3_17-Oct-2014 with tracked changes_v3 (IAS/PCI) Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger

Revised Industry Connections Activity Approval