IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
8 DECEMBER 2010

Approved PARs for New Standards

  • P802.11ai (C/LM) IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Fast Initial Link Setup
  • P802.15.4j (C/LM) IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment: Alternative Physical Layer Extension to Support Medical Body Area Network (MBAN) Services Operating in the 2360-2400 MHz Band
  • P802.15.4k (C/LM) IEEE Standard for Local and Metropolitan Area Networks - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment - Physical Layer (PHY) Specifications for Low Energy, Critical Infrastructure Monitoring Networks (LECIM)
  • P1828 (C/S2ESC) Standard for Systems with Virtual Components
  • P2200 (C/SS) Standard Protocol for Stream Management in Media Client Devices
  • P1836 (EMC/SDCom) Standard for Electromagnetic Compatibility (EMC) - Limits for Harmonic Current Emissions Produced by Equipment Connected to Public Low-Voltage Systems with Input Current <= 16 A per Phase
  • P1837 (EMC/SDCom) Standard for Electromagnetic Compatibility (EMC) - Limits for Harmonic Current Emissions Produced by Equipment Connected to Public Low-Voltage Systems with Input Current > 16 and <= 75 A per phase
  • P3004.8 (IAS/TBCC) Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
  • P1591.1 (PE/PSC) Standard for Testing and Performance of Hardware for Optical Groundwire (OPGW)
  • P1591.2 (PE/PSC) Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
  • P1591.3 (PE/PSC) Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable Systems (WRAP Cable)
  • PC37.240 (PE/PSR) Standard for Cyber Security Requirements for Substation Automation, Protection and Control Systems
  • P751 (PE/T&D) Guide for Design of Wood Transmission Structures
  • P1609.12 (VT/ITS) Standard for Wireless Access in Vehicular Environment (WAVE) - Provider Service Identifier (PSID) Allocation

PARs for Revision of Standards

  • P1484.11.1 (C.LT) Standard for Learning Technology-Data Model for Content Object Communication
  • P11073-10101 (EMB/11073) Standard for ISO/ 11073-10101:2004, Health informatics - Point-of-care medical device communication - Nomenclature
  • P11073-20101 (EMB/11073) Standard for ISO/ 11073-20101:2004, Health informatics - Point-of-care medical device communication - Application profile - Base standard
  • P1309 (EMC/SDCom) Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz
  • P1434 (PE/EM) Guide for the Measurement of Partial Discharges in AC Electric Machinery
  • PC62.82.2 (PE/SPDHV) Guide for the Application of Insulation Coordination
  • P1267 (PE/SUB) Guide for Development of Specification for Turnkey Substation Projects
  • PC37.010 (PE/SWG) Application Guide for AC High-Voltage Circuit Breakers > 1000 Vac Rated on a Symmetrical Current Basis
  • PC57.19.01 (PE/TR) Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings

Modified PARs

  • P11073-00103 (EMB/11073) Guide for Health Informatics - Personal Health Device Communication - Overview
  • P1688 (EMC/SDCom) Standard for Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules
  • P1349 (IAS/PCI) Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations
  • P848 (PE/IC) Standard Procedure for the Determination of the Ampacity Derating Factor for Fire-Protected Cable Systems
  • P1792 (PE/NPE) Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability
  • P1222 (PE/PSC) Standard for Testing and Performance for All-Dielectric Self Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • PC37.113 (PE/PSR) Guide for Protective Relay Applications to Transmission Lines
  • P535 (PE/SBC) Standard for Qualification of Class 1E Vented Lead Storage Batteries for Nuclear Power Generating Stations
  • P980 (PE/SUB) Guide for Containment and Control of Oil Spills in Substations
  • P1303 (PE/SUB) Guide for Static Var Compensator Field Tests
  • PC57.12.91 (PE/TR) Standard Test Code for Dry-Type Distribution and Power Transformers
  • PC57.98 (PE/TR) Guide for Transformer Impulse Tests
  • P1701 (SCC31) Standard for Optical Port Communication Protocol to Complement the Utility Industry End Device Data Tables
  • P1704 (SCC31) Standard for Utility Industry End Device Communications Module

Withdrawn PARs

  • P1484.11.1a (C/LT) IEEE Standard for Learning Technology - Data Model for Content Object Communication - Amendment
  • P20000.1 (C/S2ESC) Standard for ISO/IEC 20000-1:2005, Information Technology -- Service Management -- Part 1: Specification
  • P20000.2 (C/S2ESC) Standard for ISO/IEC 20000-2:2005, Information Technology -- Service Management -- Part 2: Code of Practice
  • P25051 (C/S2ESC) Standard for Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -- Requirements for Quality of Commercial Off-The-Shelf (COTS) Software Product and Instructions for Testing
  • P2407 (C/SAB) Standard for an Architecture Framework and Reference Model for Personalized Health Informatics
  • P1450 (C/TT) Standard Test Interface Language (STIL) for Digital Test Vectors
  • P1450.4 (C/TT) Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Test Flow Specification
  • P11073-20200 (EMB/11073) Standard for Health informatics - Point-of-care medical device communication - Application profile – Association control function
  • P1713 (IAS/PCI) Recommended Practice for Electrical Shore-to-Ship Connections
  • P1451.4-2004/Cor 1 (IM/ST) Standard for A Smart Transducer Interface for Sensors and Actuators-- Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats - Corrigendum 1
  • P1591.1 (PE/PSC) Standard for Testing and Performance of Hardware for Optical Groundwire (OPGW)
  • P1591.2 (PE/PSC) Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
  • P1591.3 (PE/PSC) Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable Systems (WRAP Cable)
  • P1777 (PE/PSC) Recommended Practice for Using Wireless Data Communications in Power System Operations
  • PC62.51 (PE/SPDLV) Standard for Performance Criteria and Test Methods for Hardwired Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120/240 V Single Phase Power Service and Metallic Conductive Communication Line(s)
  • P837a (PE/SUB) IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding - Amendment
  • PC135.11 (PE/T&D) Standard for Zinc-coated Ferrous Guy Attachments, Wrap and Formed Guy Hooks, Guy Strain Plates, and Pole Eye Plates for Overhead Line Construction
  • PC135.30 (PE/T&D) Standard for Ground Rod Electrode, Clamp & Coupling Specification
  • P1482 (VT/RT) Standard for Rail Vehicle Monitoring and Diagnostic Systems
  • P1626 (VT/RT) Standard for dc Overhead Contact System Insulation Requirements for Transit Systems

Conditions Met

  • P1242 (IAS/PCI) – Revision PAR Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
  • P1696 (IM/WM&A) – New PAR Standard for Terminology and Test Methods for Circuit Probes
  • P61014 (RS/SC) – New PAR Standard for Programmes for Reliability Growth

New Standards

  • P802.20a (C/LM) IEEE Standard for Local and Metropolitan Area Networks – Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility - Physical and Media Access Control Layer Specification - Amendment 1: Management Information Base Enhancements and Corrigenda Items
  • P1511.1 (PE/IC) Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kV P1676 (PE/SUB) Guide for Control Architecture for High Power Electronics (1 MW and Greater) Used in Electric Power Transmission and Distribution Systems
  • P1775 (PE/PSC & COM/SC &, EMC/SDCom) Standard for Powerline Communication Equipment - Electromagnetic Compatibility (EMC) Requirements – Testing and Measurement Methods
  • P3007.1 (IAS/TBCC) Recommended Practice for Operation and Management of Industrial and Commercial Power Systems
  • PC37.09b (PE/SWG) IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • PC37.110-2007/Cor1 (PE/PSR) IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes - Corrigendum 1: Corrections to Equation 18 and Equation 19
  • PC57.139 (PE/TR) Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
  • PC57.142 (PE/TR & PE/SWG) Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformer, Switching Device, And System Interaction

New Standards—Conditions Met

  • P1185 (PE/IC) – Revision Standard - Recommended Practices for Cable Installation in Generating Stations and Industrial Facilities

Revision Standards

  • P450 (PE/SB) Recommended Practice for Maintenance, Testing and Replacement of Vented Lead-Acid Batteries for Stationary Applications
  • P1149.4 (C/TT) Standard for a Mixed-Signal Test Bus
  • P1232 (SASB/SCC20) Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)
  • P1473 (VT/RT) Standard for Communications Protocol Aboard Passenger Trains
  • PC62.62 (PE/SPDLV) Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
  • PC62.82.1 (PE/SPDHV) Standard for Insulation Coordination - Definitions, Principles, and Rules
  • PSI 10 (SASB/SCC14) Standard for Metric Practice

Reaffirmations

  • 101-1987 (R2004) (DEI) IEEE Guide for the Statistical Analysis of Thermal Life Test Data
  • 930-2004 (DEI) IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
  • 1023-2004 (PE/NPE) IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities
  • 1124-2003 (PE/T&D) IEEE Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmission Systems
  • 1188-2005 (PE/SB) IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
  • 1285-2005 (C/MSC) IEEE Standard for Scalable Storage Interface (S2I)
  • 1458-2005 (IAS/PCI) Recommended Practice for the Selection, Application, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
  • 1511-2004 (PE/IC) IEEE Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
  • C37.21-2005 (PE/SWG) IEEE Standard for Control Switchboards
  • C37.48-2005 (PE/SWG) IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • C37.103-2004 (PE/PSR) IEEE Guide for Differential and Polarizing Relay Circuit Testing
  • C37.119-2005 (PE/PSR) IEEE Guide for Breaker Failure Protection of Power Circuit Breakers
  • C57.19.00-2004 (PE/TR) IEEE Standard General Requirements and Test Procedures for Power Apparatus Bushings
  • C62.43-2005 (PE/SPDLV) IEEE Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 V, rms, or 1200 V, DC) Data, Communications, and Signaling Circuits