IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
21 August 2014

New PARs

  • P2415 (C/DA) Standard for Unified Hardware Abstraction and Layer for Energy Proportional Electronic Systems
  • P2416 (C/DA) Standard for Power Modeling to Enable System Level Analysis
  • P2409 (C/FIPA) Trial Use Recommended Practice for Design Process Documentation Template (DPDT)
  • P802.1AEcg (C/LM) Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Security Amendment: Ethernet Data Encryption Devices
  • P802.1ARce (C/LM) Standard for Local and Metropolitan Area Networks - Secure Device Identity Amendment 1: SHA-384 and P-384 Elliptic Curve
  • P802.3bw (C/LM) Standard for Ethernet Amendment Physical Layer Specifications and Management Parameters for 100 Mb/s Operation over a Single Balanced Twisted Pair Cable (100BASE-T1)
  • P802.15.4s (C/LM) Standard for Low-Rate Wireless Networks: Amendment Enabling Spectrum Resource Measurement Capability
  • P802.22.3 (C/LM) Standard for Spectrum Characterization and Occupancy Sensing
  • P1622.6 (C/VSSC) Recommended Practice for Voting Methods Mathematical Models
  • P1900.6b (COM/DySPAN-SC) Standard for Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and other Advanced Radio Communication Systems. Spectrum Database Interfaces Amendment
  • P2408 (IAS/PSP) Guide for Communications-Based Protection of Industrial and Commercial Power Systems
  • P61158 (IES/IES) Standard for Industrial Hard Real-Time Communication
  • P2412 (PE/IC) Standard Test for Determining Circuit Integrity Performance of Fire Resistive Cable Systems in Passenger Rail and Road Tunnels
  • P62582-2-am1 (PE/NPE) Nuclear Power Plants - Instrumentation and Control Important to Safety - Electrical Equipment Condition Monitoring Methods - Part 2: Indenter Modulus Amendment 1
  • PC37.20.9 (PE/SWG) Metal Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulation Systems
  • P1653.1 (VT/RTSC) Standard for Traction Power Transformers for Substation Applications up to 1500 Volts DC Nominal Output

PARs for the Revision of Standards

  • P1722 (C/MSC) Standard for a Transport Protocol for Time Sensitive Applications in a Bridged Local Area Network
  • P21451-2 (IM/ST) ISO/IEC/IEEE Standard for Information Technology -- Smart Transducer Interface for Sensors and Actuators -- Part 2: Serial Point-to-Point Interface
  • P1147 (PE/ED&PG) Guide for the Rehabilitation of Hydroelectric Power Plants
  • P1578 (PE/SB) Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
  • PC37.30.1 (PE/SWG) Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
  • PC37.59 (PE/SWG) Standard Requirements for Conversion of Power Switchgear Equipment
  • PC37.81 (PE/SWG) Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
  • PC37.82 (PE/SWG) Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
  • P1159.3 (PE/T&D) Recommended Practice for Power Quality Data Interchange Format (PQDIF)
  • PC57.12.23 (PE/TR) Standard for Submersible Single-Phase Transformers: 250 kVA and Smaller; High Voltage 34 500GrdY/19 920V and Below; Low Voltage 600 V and Below
  • PC57.12.51 (PE/TR) Standard for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 V to 34 500 V; Low-Voltage 208Y/120 V to 4160 V- General Requirements
  • PC57.21 (PE/TR) Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA

Modified PARs

  • P3333.1.1 (C/SAB) Standard for the Quality of Experience (QoE) and Visual Comfort Assessments of Three Dimensional (3D) Contents Based on Psychophysical Studies
  • P3333.2.1 (C/SAB) Recommended Practice for Three-Dimensional (3D) Medical Modelling
  • PC37.20.1 (PE/SWG) Standard for Metal-Enclosed Low Voltage (1000Vac and Below, 3200Vdc and Below) Power Circuit Breaker Switchgear
  • PC57.153 (PE/TR) Guide for Paralleling Regulating Transformers

Withdrawn PARs

  • P21451-2 (IM/ST) Standard for a Smart Transducer Interface for Sensors and Actuators - Serial Point-to-Point Interface
  • P1671.0 (SASB/SCC20) Guide for the Use of Automatic Test Equipment Markup Language (ATML); the IEEE-1671 Family of Standards

New Standards

  • 1801a (C/DA) Standard for Design and Verification of Low-Power Integrated Circuit–Amendment 1
  • 11073-10424 (EMB/11073) Standard for Health Informatics – Personal Health Device Communication – Part 10424: Device Specialization – Sleep Apnoea Breathing Therapy Equipment (SABTE)
  • 11073-10425 (EMB/11073) Standard for Health Informatics – Personal Health Device Communication – Device Specialization – Continuous Glucose Monitor (CGM)
  • 1708 (EMB/Stds Com) Standard for Wearable Cuffless Blood Pressure Measuring Devices
  • 45.5 (IAS/PCI) Recommended Practice for Electrical Installations on Shipboard – Safety Considerations
  • 1668 (IAS/PSE) Recommended Practice for Voltage Sag and Interruption Ride-Through Testing for End Use Electrical Equipment Less than 1,000 Volts
  • 3003.2 (IAS/TBCC) Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems
  • 3004.5 (IAS/TBCC) Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
  • 1138-2009/Cor 1 (PE/PSC) Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines – Corrigendum 1: Stress Strain Temperature Correction, Aeolian Vibration Velocity
  • 1232.3 (SASB/SCC20) Guide for the Use of Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)

Revision Standards

  • 11073-20601 (EMB/11073) Standard for Health Informatics – Personal Health Device Communication – Part 20601: Application Profile – Optimized Exchange Protocol
  • 1115 (PE/SB) Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • 837 (PE/SUB) Standard for Qualifying Permanent Connections Used in Substation Grounding
  • C37.26 (PE/SWG) Guide for Methods of Power-Factor Measurement for Low-Voltage (1000 V ac or lower) Inductive Test Circuits
  • C57.12.38 (PE/TR) Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 V and Below, Low Voltage, 480/240 V; 250 kVA and Smaller

New Industry Connections Activity Approvals