IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
31 MARCH 2011

Approved PARs for New Standards

  • P1860 (BOG/CAG+PE/SUB+PE/SWG+PE/TR) Standard for Voltage and Reactive Power in 1000kV or Greater (Ultra High Voltage) AC Systems
  • P1861 (BOG/CAG+PE/SUB+PE/SWG+PE/TR) Standard for Acceptance Tests on Sitehand-Over Test of 1000kV or Greater (Ultra High Voltage) AC Electric Equipment and Commissioning Procedures
  • P1862 (BOG/CAG+PE/SUB+PE/SWG+PE/TR) Standard for Overvoltage and Insulation Coordination of 1000kV or Greater (Ultra High Voltage) AC Transmission Projects
  • P3333 (BOG/CAG) Standard for the Quality Assessment of Three Dimensional (3D) Displays, 3D Contents and 3D Devices based on Human Factors
  • P1906.1 (COM/SC) Recommended Practice for Nanoscale and Molecular Communication Framework
  • P1822 (EMB/SC) Standard for Digital Microscope Analyzer, Whole Slide Image Scanner and Digital Microscope
  • PC37.244 (PE/PSR) Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, and Monitoring
  • P1453.1 (PE/T&D) Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)-Limits-Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
  • P62704-1 (SCC39) Standard for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 1: General Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations
  • P62704-2 (SCC39) Standard for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 2: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Vehicle Mounted Antenna Configurations
  • P62704-3 (SCC39) Standard for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 3: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Mobile Phones/Personal Wireless Devices
  • P1833 (VT/RT) Guide for the Design of Direct Current Overhead Contact Systems for Transit Systems
PARs for Revision of Standards
  • P1076 (C/DA) Standard for VHDL Language Reference Manual
  • P1076.1 (C/DA) Standard VHDL Analog and Mixed-Signal Extensions
  • P287 (IM/Con) Standard for Precision Coaxial Connectors (DC to 110 GHz)
  • P383 (PE/NPE) Standard for Qualifying Electric Cables and Splices for Nuclear Facilities
  • P1205 (PE/NPE) Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities
  • P525 (PE/SUB) Guide for the Design and Installation of Cable Systems in Substations
  • P1402 (PE/SUB) Standard for Physical Security of Electric Power Substations
  • PC37.16 (PE/SWG) Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (1000 V and below) and DC (3200 V and below) Power Circuit Breakers
  • P1243 (PE/T&D) Guide for Improving the Lightning Performance of Transmission Lines
  • PC57.12.34 (PE/TR) Standard for Requirements for Pad-Mounted, Compartmental Type, Self Cooled, Three Phase Distribution Transformers, 10 MVA and Smaller; High Voltage, 34.5kV Nominal System Voltage and Below; Low Voltage, 15kV Nominal System Voltage and Below
  • PC57.140 (PE/TR) Guide for Evaluation and Reconditioning of Liquid Immersed Power Transformers
  • P1573 (PEL/SC) Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance

Modified PARs

  • P1680.2 (C/EASC) Standard for Environmental Assessment of Imaging Equipment
  • P1680.3 (C/EASC) Standard for Environmental Assessment of Televisions
  • P802.15.7 (C/LM) Standard for Short-Range Wireless Optical Communication using Visible Light
  • P26512 (C/S2ESC) Standard for Systems and Software Engineering - Requirements for Acquirers and Suppliers of User Documentation
  • P1810 (IAS/PCI) Guide for the Installation of Fire-Rated Cables Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries.
  • P60092-510 (IAS/PCI) Standard for Cold Ironing - Part 1: High Voltage Shore Connection (HVSC) Systems- General Requirements
  • P1658 (IM/WM&A) Standard for Terminology and Test Methods of Digital-to-Analog Converter Devices
  • P62582-1 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General
  • P62582-2 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter modulus
  • P62582-3 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
  • P62582-4 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 4: Oxidation induction techniques
  • P535 (PE/SB) Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations
  • P1031 (PE/SUB) Guide for the Functional Specification of Transmission Static Var Compensators
  • P1613 (PE/SUB) Standard for Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Facilities
  • P62271-37-082 (PE/SWG) Standard for High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
  • P1835 (PE/T&D) Standard for Atmospheric (Above-Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
  • P1839 (PE/T&D) Standard for Below-Grade Corrosion Control of Transmission, Distribution, and Substation Structures by Coating Repair Systems

Withdrawn PARs

  • P1778 (C/DA) Standard for Esterel v7 Language Reference Manual
  • P1650 (NTC/SC) Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
  • P1781 (PE/IC) Guide for the Application of Extruded Conductor and Insulation Shields for Shielded Power Cables Rated 5 kV to 500 kV AC
  • P1528.1 (SCC39) Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: General Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations
  • P1528.2 (SCC39) Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Vehicle Mounted Antenna Configurations
  • P1155 (IM/ST) Standard for VMEbus Extensions for Instrumentation: VXIbus Development

New Standards

  • P802.3bg (C/LM) IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer and Management Parameters for Serial 40 Gb/s Ethernet Operation Over Single-Mode Fiber
  • P802.16m (C/LM + MTT) IEEE Standard for Local and metropolitan area networks - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems – Advanced Air Interface
  • P1484.12.1-2002/Cor1 (C/LT) IEEE Standard for Learning Object Metadata - Corrigendum 1: Corrigenda for 1484.12.1 LOM (Learning Object Metadata)
  • P1549 (MTT) Standard for Microwave Filter Definitions
  • P1581 (C/TT) Standard for Static Component Interconnection Test Protocol and Architecture
  • P1584b (IAS/PCI) IEEE Guide for Performing Arc-Flash Hazard Calculations - Amendment 1: Changes to Clause 4
  • P1724 (PE/T&D) Guide for the Preparation of a Transmission Line Design Criteria Document
  • P1733 (C/MSC) Standard for Layer 3 Transport Protocol for Time Sensitive Applications in Local Area Networks
  • P15026-1 (C/S2ESC) Trial-Use Standard for Adoption of ISO/IEC TR 15026-1:2010 - Systems and Software Engineering -Systems and Software Assurance - Part 1: Concepts and Vocabulary
  • P24748-1 (C/S2ESC) Guide for Adoption of ISO/IEC TR 24748-1:2010 Systems and Software Engineering - Life Cycle Management - Part 1: Guide for Life Cycle Management
  • P26512 (C/S2ESC) Standard for Software and Systems Engineering - Requirements for Acquirers and Suppliers of User Documentation
  • P62582-1 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and Control Important to Safety - Electrical Equipment Condition Monitoring Methods - Part 1: General
  • P62582-4 (PE/NPE) Standard for Nuclear Power Plants - Instrumentation and Control Important to Safety - Electrical Equipment Condition Monitoring Methods - Part 4: Oxidation Induction Techniques

Revision Standards

  • P1076.1.1 (C/DA) Standard for VHDL Analog and Mixed-Signal Extensions - Packages for Multiple Energy Domain Support
  • P1222 (PE/PSC) Standard for Testing and Performance for All-Dielectric Self Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • P1250 (PE/T&D) Guide for Identifying and Improving Voltage Quality in Power Systems

Reaffirmations

  • 492-1999 (R2005) (PE/EM) IEEE Guide for Operation and Maintenance of Hydro-Generators
  • 802.1D-2004 (C/LM) IEEE Standard for Local and Metropolitan Area Networks Media Access Control (MAC) Bridges
  • 824-2004 (PE/T&D) IEEE Standard for Series Capacitor Banks in Power Systems
  • 1025-1993 (R1999) (PE/T&D) IEEE Guide to the Assembly and Erection of Concrete Pole Structures
  • 1500-2005 (C/TT) IEEE Standard Testability Method for Embedded Core-Based Integrated Circuits
  • 1554-2005 (AES/GA) IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
  • C37.012-2005 (PE/SWG) IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
  • C37.90-2005 (PE/PSR) IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • C37.92-2005 (PE/PSR) IEEE Standard for Analog Inputs to Protective Relays from Electronic Voltage and Current Transducers
  • C62.31-2006 (PE/SPDLV) IEEE Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components