IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
6 March 2013

New PARs

  • P1888.4 (BOG/CAG) Green Smart Home and Residential Quarter Control Network Protocol
  • P1900.5.2 (COM/DySpan) Method for Modeling Spectrum Consumption
  • P1886.1 (IAS/PCI) Subsea Electrical Applications - Power Connectors & Penetrators from 1.2 kV through 36 kV Um
  • P742 (PE/NPE) Standard for Bus Voltage Monitoring of the Class 1E Power Systems in Nuclear Power Generating Stations (NPGS)
  • PC37.118.1a (PE/PSR) IEEE Standard for Synchrophasor Measurements for Power Systems Amendment to modify selected performance requirements
  • PC62.42.1 (PE/SPDLV) Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 1 Gas Discharge Tubes (GDTs)
  • PC62.42.2 (PE/SPDLV) Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 2 Metal-Oxide Varistors (MOVs)
  • P1885 (PE/T&D) Guide for Assessing, Measuring and Verifying Volt-Var Control Optimization on Distribution Systems
  • PC57.12.31-2010/Cor 1 (PE/TR) IEEE Standard for Pole-Mounted Equipment - Enclosure Integrity - Corrigendum 1: Correction to the SCAB Corrosion Test in Section 4.5.6
  • PC57.160 (PE/TR) Guide for the Electrical Measurement of Partial Discharges in High Voltage Bushings and Instrument Transformers

PARs for the Revision of Standards

  • P1394 (C/MSC) Standard for a High-Performance Serial Bus
  • P1900.1 (Com/DySpan) Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
  • P387 (PE/NPE) Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • P497 (PE/NPE) Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
  • P1792 (PE/NPE) Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability
  • P1106 (PE/SB) Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
  • P1115 (PE/SB) Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • PC62.42 (PE/SPDLV) Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Overview

Modified PARs

  • P3333.1 (C/SAB) Standard for the Quality Assessment of Three Dimensional (3D) Contents Based on Psychophysical Studies
  • P11073-10419 (EMB/11073) Standard for Health informatics - Personal health device communication - Device specialization - Insulin pump
  • P1816 (PE/IC) Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories
  • P535 (PE/SB) Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations

Withdrawn PARs

  • P1394d (C/MSC) IEEE Standard for a High-Performance Serial Bus - Amendment: IEEE 1394 Single-Mode Fiber Physical Medium (PMD) Specification
  • P62646 (PE/NPE) Standard for Nuclear Power Plants - Control rooms - Computer based procedures

New Standards

  • P487.5 (PE/PSC) Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
  • P802.16.1a (C/LM) Standard for Wireless MAN - Advanced Air Interface for Broadband Wireless Access Systems - Amendment: Higher Reliability Networks
  • P802.16n (C/LM) Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Broadband Wireless Access Systems Amendment: Higher Reliability Networks
  • P1727 (PE/IC) Guideline for Working Procedures on Underground Transmission Circuits With Induced Voltage
  • P1816 (PE/IC) Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5kV through 46 kV and the Installation of Mating Accessories
  • P1857 (C/SAB) Standard for Advanced Audio and Video Coding
  • P1905.1 (COM/PLC) Standard for a Convergent Digital Home Network for Heterogeneous Technologies
  • P3006.7 (IAS/TBCC) Recommended Practice for Determining the Reliability of "24 x 7" Continuous Power Systems in Industrial and Commercial Facilities
  • P3006.9 (IAS/TBCC) Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems
  • PC37.236 (PE/PSR) Guide for Power System Protective Relay Applications over Digital Communication Channels
  • PC37.244 (PE/PSR) Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, and Monitoring

Revision Standards

  • P4 (PE/PSIM) Standard for High-Voltage Testing Techniques
  • P400.2 (PE/IC) Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)
  • P1017 (IAS/PCI) Recommended Practice for Field Testing Electric Submersible Pump Cable
  • P1018 (IAS/PCI) Recommended Practice for Specifying Electric Submersible Pump Cable – Ethylene - Propylene Rubber Insulation
  • P1019 (IAS/PCI) Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
  • P1641.1 (SASB/SCC20) Guide for the Use of IEEE Std 1641, Standard for Signal and Test Definition
  • P1801 (C/DA) Standard for Design and Verification of Low Power Integrated Circuits
  • PC37.20.4 (PE/SWG) Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear
  • PC37.63 (PE/SWG) Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
  • PC57.152 (PE/TR) Guide for Diagnostic Field Testing of Fluid Filled Power Transformers, Regulators, and Reactors

New Industry Connections Activities