Active PAR

PC50.13

Standard for 50 and 60 Hz Synchronous Generators for Non-Hydraulic Applications Rated 10 MVA and Above

The requirements in this standard apply to all 50 Hz and 60 Hz synchronous generators driven by various sources such as reciprocating engines, steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. Also included are synchronous compensators (condensers) of the same output range connected to a grid. Hydraulic driven applications are covered in ANSI/IEEE C50.12. The generators covered by this standard are to have rated outputs of 10 MVA and above. Generators below this rating are generally covered by NEMA-MG 1 [B19]

Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Status
Active PAR
PAR Approval
2019-05-21
Superseding
C50.13-2014

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Working Group
GEN - WG8 - Generator SC - Coordination of C50s and IEC - WG#8
IEEE Program Manager
Malia Zaman
Contact Malia Zaman
Working Group Chair
James Lau

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


C50.13-2014

IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.

Learn More About C50.13-2014

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


C50.13-2005

IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four-pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.

Learn More About C50.13-2005

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.