Surge-protective components (SPCs) used in power and telecom surge-protective devices (SPDs) and equipment ports are covered in the C62.42 guide series. This Overview part covers protective functions, both non-linear and…
This standard applies to a line trap inserted into a power circuit to minimize carrier-frequency signal losses. The standard covers line traps in which the main coil is designed as…
Revision of IEEE C37.41-2008 and supersedes IEEE C37.40-2003. Required procedures for performing design tests for high-voltage fuses, as well as for fuse disconnecting switches, are specified. These design tests, as…
The guidelines for online monitoring of large synchronous generators are described in this guide. High-level discussions of each of the proposed monitoring methods, and recommended threshold values, whenever there is…
Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to…
Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of optical fiber systems for the entire facility are presented in this…
Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of metallic wire-line components in part of the telecommunication circuit and optical…
Recommended practices for communication and interoperation of devices connected on an electric power substation Internet Protocol (IP) network are provided. An introduction to the concepts that need to be mastered…
