Covered in the IEEE C62.42 guide series are surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports. Covered in this standard on gas discharge tube (GDT) technology SPCs are the following: component construction, characteristics, ratings, and application examples. The application examples are given in two informative annexes covering: basic circuits and protection circuits specific to communications, local area networks, high frequency feeds, and industrial services.
- Sponsor Committee
- PE/SPDLV - Surge Protective Devices/Low Voltage
Learn More About PE/SPDLV - Surge Protective Devices/Low Voltage - Status
- Active Standard
- PAR Approval
- 2013-03-06
- Board Approval
- 2016-09-22
- History
-
- ANSI Approved:
- 2018-03-23
- Published:
- 2016-12-09
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/SPDLV - Surge Protective Devices/Low Voltage
Learn More About PE/SPDLV - Surge Protective Devices/Low Voltage - Working Group
-
LV3.6.3 - 3.6.3 LV Surge Protective Device Components Application Guide WG
- IEEE Program Manager
- Christian Orlando
Contact Christian Orlando - Working Group Chair
- William Travis
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC62.42.5
Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 5: 2-Terminal Electronic Current Limiters
The C62.42 guide series covers surge protective components used in Information and Communications Technology (ICT) surge protective devices (SPDs) and equipment ports. This part 5 is for 2-terminal electronic current limiters (ECLs) having a continuous characteristic. Items covered are: • ECL terms and definitions • Evolution of ECL technology • Essential characteristics and ratings • Applications examples
PC62.42.7
Guide for the Application of Thyristor Surge Protective Components
The IEEE C62.42 guide series covers surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports. This part, Part 7 of the series, describes Silicon Thyristor SPCs, including the fixed voltage, gated and low-capacitance (for broadband use) thyristor technology variants. Component construction, characteristics, ratings and application examples are also described.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C62.42.0-2016
IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--Overview
Surge-protective components (SPCs) used in power and telecom surge-protective devices (SPDs) and equipment ports are covered in the C62.42 guide series. This Overview part covers protective functions, both non-linear and linear; component technologies and characteristics; common circuit designs used in SPDs and equipment ports; and information on the impulse (surge) generators used to test SPCs. Additional parts of C62.42 on specific SPC technologies provide details on component construction, characteristics and ratings, and application examples.
C62.42.2-2022
IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--Part 2: Metal- Oxide Varistors (MOVs)
Surge protective components (SPCs) used in power and telecom surge-protective devices (SPDs) and equipment ports are covered by the C62.42 guide series. Component construction, characteristics, ratings, and application examples are covered in this part on metal-oxide varistor (MOV) technology SPCs.
C62.42.3-2017
IEEE Guide for the Application of Surge Protective Components in Surge Protective Devices and Equipment Ports -- Part 3: Silicon PN-Junction
Surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports are covered in the IEEE C62.42™ guide series. This part, Part 3 of the series, describes silicon PN-Junction clamping diode SPCs and covers technology variants, including forward biased semiconductor diodes, Zener breakdown semiconductor diodes, avalanche breakdown semiconductor diodes, punch-through semiconductor bipolar junction transistor diodes, and fold-back semiconductor bidirectional transistor diodes, as well as component construction; characteristics; ratings; and application examples.
C62.42.4-2020
IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports--Part 4: Thermally Activated Current Limiters
Surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports are covered in the IEEE C62.42 guide series. Positive temperature coefficient (PTC) thermistor components are covered in this part. These SPCs are operated by self-heating and is automatically reset after the end of the overcurrent condition without the need for manual intervention. The two types of body material, polymer and ceramic, are covered in this guide. These components are referred to as follows: a) polymer positive temperature coefficient (PPTC) thermistors and b) ceramic positive temperature coefficient (CPTC) thermistors. Overview, construction, operation, production, ratings, characteristics, and application examples are topics covered in this guide.
C62.42.6-2018
IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports--Part 6 High Frequency Signal Isolation Transformers
Surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports are covered in the IEEE C62.42 guide series. The following are covered in this part of the series on high-frequency signal isolation-transformer technology SPCs: component construction, characteristics, and ratings.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C62.42-1987
IEEE Guide for the Application of Gas Tube Arrester Low-Voltage Surge-Protective Devices
Superseded. Assistance in selecting the most appropriate type of low-voltage surge-protective device (either gas tube or air gap) for a particular application is provided. Evaluation of the characteristics of each device to meet specific service requirements is also given.
C62.42-1992
IEEE Guide for the Application of Gas Tube and Air Gap Arrester Low-Voltage (Equal to or Less than 1000 V rms or 1200 V dc) Surge Protective Devices
Superseded by IEEE Std C62.42-2005 This guide establishes test methods for the evaluation of ESD withstand capability for electronic equipment subassemblies. It includes information about test conditions, test equipment, and test procedures for ESD tests of printed circuit boards and other subassemblies.
C62.42-2005
IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] Circuits
Assistance in selecting the most appropriate type of low-voltage component surge-protective device (gas tube, air gap, metal-oxide varistor, or avalanche junction semiconductor) for a particular application is provided. Evaluation of the characteristics of each device to meet specific service requirements is also given.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards