Methods used to place cable underground vary widely. The choice of method depends on such factors as soil conditions, surface and subsurface obstructions, total footage to be installed, spacing between…
IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Insulated Connectors, provides design tests for shield resistance and a simulated fault-current initiation for exposed semiconducting shields used…
This standard provides design tests for shield resistance and a simulated fault-current initiation for exposed semiconducting shields used on cable accessories, specifically joints and separable insulated connectors rated 15 kV…
Line-commutated semiconductor power converters for general-purpose industrial dc motor drives powered from three-phase or single-phase ac supplies are considered. The objectives are to provide a common vocabulary, common methods of…
This standard includes definitions of those terms deemed necessary of performing or understanding measurements on channels used for data communications. terms that are applicable to audio interfaces of wireline, leased…
A recommended practice for the design and operation of electric systems in health care facilities is provided. The term health care facility as used here encompasses buildings or parts of…
These recommended practices will aid electrical systems designers in achieving safety of life and preservation of property through operational considerations to reduce electrical failures; to allow maintenance with a minimum…
This guide provides general recommendations for the selection of methods, equipment and tools that have been found practical for the stringing of overhead transmission line conductors and overhead ground-wires. The…
General recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires are provided.…
