Inactive-Reserved Standard

IEEE 1394.1-2004

IEEE Standard for High Performance Serial Bus Bridges

The model, definition, and behaviors of High Performance Serial Bus bridges, which are devices that can be used to interconnect two separately enumerable buses, are specified.

Sponsor Committee
C/MSC - Microprocessor Standards Committee
Learn More About C/MSC - Microprocessor Standards Committee
Status
Inactive-Reserved Standard
PAR Approval
2001-02-21
Board Approval
2004-12-08
History
ANSI Approved:
2005-04-12
Published:
2005-07-01
Reaffirmed:
2009-09-11
Inactivated Date:
2020-03-05

Working Group Details

Society
IEEE Computer Society
Learn More About IEEE Computer Society
Sponsor Committee
C/MSC - Microprocessor Standards Committee
Learn More About C/MSC - Microprocessor Standards Committee
Working Group
1394_WG - High Performance Serial Bus Working Group
IEEE Program Manager
Tom Thompson
Contact Tom Thompson
Working Group Chair
Ashley Butterworth

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


1394.2

Standard for Serial Express: A Scalable Gigabit Extension to the IEEE Standard Serial Bus

Learn More About 1394.2

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


1394-1995

IEEE Standard for a High Performance Serial Bus

A high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses, as well as such nonbus interconnects as the IEEE Std 1596-1992, Scalable Coherent Interface, is specified. It is intended to provide a low-cost interconnect between cards on the same backplane, cards on other backplanes, and external peripherals. This standard follows the IEEE Std 1212-1991 Command and Status Register (CSR) architecture.

Learn More About 1394-1995

1394a-2000

IEEE Standard for a High Performance Serial Bus (Amendment)

Amended information for a high-speed Serial Bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. This amendment is intended to extend the usefulness of a low-cost interconnect between external peripherals, as described in IEEE Std 1394-1995. This amendment to IEEE Std 1394-1995 follows the ISO/IEC 13213:1994 Command and Status Register (CSR) Architecture.

Learn More About 1394a-2000

1394c-2006

IEEE Standard for a High-Performance Serial Bus--Amendment 3

Supplemental Information for a high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. It is intended to extend the usefulness of a low-cost interconnect between external peripherals. This standard follows the IEEE Std 1212-2001 command and status register (CSR) architecture. Remarks: Amendment to IEEE Std 1394-1995 including IEEE Std 1394a-2000 and IEEE Std 1394b-2002

Learn More About 1394c-2006

1394c-2006

IEEE Standard for a High Performance Serial Bus - Amendment 3

Supplemental Information for a high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. It is intended to extend the usefulness of a low-cost interconnect between external peripherals. This standard follows the IEEE Std 1212-2001 command and status register (CSR) architecture. Remarks: Amendment to IEEE Std 1394-1995 including IEEE Std 1394a-2000 and IEEE Std 1394b-2002

Learn More About 1394c-2006

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


1394-2008

IEEE Standard for a High-Performance Serial Bus

This standard provides specifications for a high-speed serial bus that supports both asynchronous and isochronous communication and integrates well with most IEEE standard 32-bit and 64-bit parallel buses. It is intended to provide a low-cost interconnect between cards on the same backplane, cards on other backplanes, and external peripherals. Interfaces to longer distance transmission media [such as unshielded twisted pair (UTP), optical fiber, and plastic optical fiber (POF)] allow the interconnection to be extended throughout a local network. This standard follows the command and status register (CSR) architecture of IEEE Std 1212-2001.

Learn More About 1394-2008

1394.3-2003

IEEE Standard for a High Performance Serial Bus Peer-to-Peer Data Transport Protocol (PPDT)

This standard defines a peer-to-peer data transport (PPDT) protocol between Serial Bus devices that implement Serial Bus Protocol 2 (SBP-2). The facilities specified include device and service discovery, self-configurable (plug and play) binding, and connection management.

Learn More About 1394.3-2003

Subscribe

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.