This standard defines a peer-to-peer data transport (PPDT) protocol between Serial Bus devices that implement Serial Bus Protocol 2 (SBP-2). The facilities specified include device and service discovery, self-configurable (plug and play) binding, and connection management.
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2000-01-30
- Board Approval
- 2003-09-11
- History
-
- ANSI Approved:
- 2004-01-29
- Published:
- 2004-04-14
- Reaffirmed:
- 2008-12-10
- Inactivated Date:
- 2019-11-07
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Working Group
-
1394_WG - High Performance Serial Bus Working Group
- IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- Ashley Butterworth
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1394.2
Standard for Serial Express: A Scalable Gigabit Extension to the IEEE Standard Serial Bus
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1394-1995
IEEE Standard for a High Performance Serial Bus
A high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses, as well as such nonbus interconnects as the IEEE Std 1596-1992, Scalable Coherent Interface, is specified. It is intended to provide a low-cost interconnect between cards on the same backplane, cards on other backplanes, and external peripherals. This standard follows the IEEE Std 1212-1991 Command and Status Register (CSR) architecture.
1394a-2000
IEEE Standard for a High Performance Serial Bus (Amendment)
Amended information for a high-speed Serial Bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. This amendment is intended to extend the usefulness of a low-cost interconnect between external peripherals, as described in IEEE Std 1394-1995. This amendment to IEEE Std 1394-1995 follows the ISO/IEC 13213:1994 Command and Status Register (CSR) Architecture.
1394c-2006
IEEE Standard for a High-Performance Serial Bus--Amendment 3
Supplemental Information for a high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. It is intended to extend the usefulness of a low-cost interconnect between external peripherals. This standard follows the IEEE Std 1212-2001 command and status register (CSR) architecture. Remarks: Amendment to IEEE Std 1394-1995 including IEEE Std 1394a-2000 and IEEE Std 1394b-2002
1394c-2006
IEEE Standard for a High Performance Serial Bus - Amendment 3
Supplemental Information for a high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. It is intended to extend the usefulness of a low-cost interconnect between external peripherals. This standard follows the IEEE Std 1212-2001 command and status register (CSR) architecture. Remarks: Amendment to IEEE Std 1394-1995 including IEEE Std 1394a-2000 and IEEE Std 1394b-2002
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1394-2008
IEEE Standard for a High-Performance Serial Bus
This standard provides specifications for a high-speed serial bus that supports both asynchronous and isochronous communication and integrates well with most IEEE standard 32-bit and 64-bit parallel buses. It is intended to provide a low-cost interconnect between cards on the same backplane, cards on other backplanes, and external peripherals. Interfaces to longer distance transmission media [such as unshielded twisted pair (UTP), optical fiber, and plastic optical fiber (POF)] allow the interconnection to be extended throughout a local network. This standard follows the command and status register (CSR) architecture of IEEE Std 1212-2001.
1394.1-2004
IEEE Standard for High Performance Serial Bus Bridges
The model, definition, and behaviors of High Performance Serial Bus bridges, which are devices that can be used to interconnect two separately enumerable buses, are specified.