Project Icon

Wired and Wireless Communications Projects

Wired and Wireless Communications Projects
Status Help
802.1Q - IEEE Draft Standard for Local and Metropolitan Area Networks--Bridges and Bridged NetworksThis standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of thos ... active Project
802.1Qcj - Standard for Local and Metropolitan Area Networks -- Bridges and Bridged Networks Amendment: Automatic Attachment to Provider Backbone Bridging (PBB) servicesBridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate in ... active Project
802.1Qcp - Standard for Local and Metropolitan Area Networks - Bridges and Bridged Networks Amendment: YANG Data ModelBridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate in ... active Project
802.1Qcr - Standard for Local and Metropolitan Area Networks-Bridges and Bridged Networks Asynchronous Traffic ShapingBridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate in ... active Project
802.1Qcw - Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: YANG Data Models for Scheduled Traffic, Frame Preemption, and Per-Stream Filtering and PolicingBridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate in ... active Project
802.1Qcx - Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: YANG Data Model for Connectivity Fault ManagementBridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate in ... active Project
802.1Xck - Standard for Local and Metropolitan Area Networks - Port-Based Network Access Control Amendment: YANG Data ModelIEEE 802 LANs are deployed in networks that convey or provide access to critical data, that support mission critical applications, or th ... active Project
802.1ABcu - Standard for Local and Metropolitan Area Networks - Station and Media Access Control Connectivity Discovery Amendment: YANG Data ModelThis standard specifies the necessary protocol and management elements to a) Facilitate multi-vendor inter-operability and the use of st ... active Project
802.1AC-2016/Cor 1 - Standard for Local and Metropolitan Area Networks -- Media Access Control (MAC) Service Definition - Corrigendum 1: Logical Link Control (LLC) Encapsulation EtherTypeThe scope of this standard is to define the Media Access Control (MAC) Service provided by all IEEE 802(R) MACs, and the Internal Sublay ... active Project
802.1ACct - Standard for Local and Metropolitan Area Networks -- Media Access Control (MAC) Service Definition Amendment Support for IEEE Std 802.15.3The scope of this standard is to define the Media Access Control (MAC) Service provided by all IEEE 802(R) MACs, and the Internal Sublay ... active Project
802.1AE - Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) SecurityThis standard will facilitate secure communication over publicly accessible LAN/MAN media for which security has not already been define ... active Project
802.1AR - IEEE Draft Standard for Local and Metropolitan Area Networks - Secure Device IdentityA Secure Device Identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. Locall ... active Project
802.1AS - Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive ApplicationsThis standard enables stations attached to bridged LANs to meet the respective jitter, wander, and time synchronization requirements for ... active Project
802.1AX - Standard for Local and Metropolitan Area Networks -- Link AggregationLink Aggregation allows the establishment of full-duplex point-to-point links that have a higher aggregate bandwidth than the individual ... active Project
802.1CF - Recommended Practice for Network Reference Model and Functional Description of IEEE 802 Access NetworkHeterogeneous networks may include multiple network interfaces, multiple network access technologies, and multiple network subscriptions ... active Project
802.1CM - Time-Sensitive Networking for FronthaulThe purpose of this standard is to enable the transport of time sensitive fronthaul streams in Ethernet bridged networks. active Project
802.1CQ - Standard for Local and Metropolitan Area Networks: Multicast and Local Address AssignmentThis standard specifies protocols, procedures, and management objects for locally-unique assignment of 48-bit and 64-bit addresses in IE ... active Project
802.1CS - Standard for Local and Metropolitan Area Networks -- Link-local Registration ProtocolLink-local Registration Protocol is designed to facilitate the creation of application protocols that distribute information through all ... active Project
802.3 - Standard for EthernetThis standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; ... active Project
802.3.2 - Standard for Ethernet YANG Data Model DefinitionsThe purpose of the standard is to define YANG models for IEEE Std 802.3 and publish these models in a machine-readable format. active Project
802.3bs - IEEE Draft Standard for Ethernet Amendment 10: Media Access Control Parameters, Physical Layers and Management Parameters for 200 Gb/s and 400 Gb/s OperationThis amendment to IEEE Std 802.3-2015 adds Clause 116 through Clause 124 and Annex 119A through Annex 120E. This amendment includes IEEE ... active Project
802.3bt - IEEE Draft Standard for Ethernet Amendment: Physical Layer and Management Parameters for DTE Power via MDI over 4-PairThis amendment to IEEE Std 802.3-2015 increases the maximum PD power available by utilizing all four pairs in the specified structured w ... active Project
802.3cb - IEEE Draft Standard for Ethernet Amendment 12: Physical Layer Specifications and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation over BackplaneThis amendment to IEEE Std 802.3-2015 defines Ethernet Media Access Control (MAC) parameters, Physical Layer specifications, and managem ... active Project
802.3cc - IEEE Draft Standard for Ethernet Amendment: Physical Layer and Management Parameters for Serial 25 Gb/s Ethernet Operation Over Single-Mode FiberThis amendment to IEEE Std 802.3-2015 adds Physical Layer (PHY) specifications and management parameters for 25 Gb/s operation over sing ... active Project
802.3cd - Standard for Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s OperationThis standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; ... active Project
802.3cg - Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation over Single Balanced Twisted-pair Cabling and Associated Power DeliveryThis standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; ... active Project
802.3ch - Standard for Ethernet Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive EthernetThis standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; ... active Project
802.15.4 - Standard for Low-Rate Wireless NetworksThe standard provides for ultra low complexity, ultra low cost, ultra low power consumption, and low data rate wireless connectivity amo ... active Project
802.15.4-2015/Cor 1 - Standard for Low-Rate Wireless Networks - Corrigendum 1This corrigendum corrects errors, inconsistencies, and ambiguities in IEEE Std 802.15.4-2015. active Project
802.15.4r - Standard for Local and metropolitan area networks--Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment for Radio based Distance Measurement TechniquesThis standard defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low data rate (typically less ... active Project
802.15.4s - IEEE Draft Standard for Low-Rate Wireless Networks: Amendment Enabling Spectrum Resource Measurement CapabilityThis amendment to IEEE Std. 802.15.4 defines MAC related functions to enable spectrum resource management. It specifies - spectrum resou ... active Project
802.15.7 - Standard for Short-Range Optical Wireless CommunicationsThis standard provides a global standard for short-range optical wireless communication. The standard provides (i) access to several hun ... active Project
802.15.8 - IEEE Draft Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Peer Aware Communications (PAC)The purpose is to provide a global standard for scalable, low power, and highly reliable wireless communications for emerging services s ... active Project
802.15.12 - Upper Layer Interface (ULI) for IEEE 802.15.4 Low-Rate Wireless NetworksThis standard defines an upper layer interface to support and harmonize the IEEE 802.15.4 ancillary functionality, e.g. fragmentation, p ... active Project
802.15.13 - Standard for Multi-Gigabit per Second Optical Wireless Communications (OWC) with Ranges up to 200 metersThe purpose of this standard is to define OWC specifications in optically transparent media enabling high data rate transfer among end p ... active Project
802.16 - IEEE Draft Standard for Air Interface for Broadband Wireless Access SystemsThis standard enables rapid worldwide deployment of innovative, cost-effective, and interoperable multivendor broadband wireless access ... active Project
802.19.2 - Recommended Practice for Local and Metropolitan Area Networks - Part 19: Coexistence of Unlicensed Wireless Systems in a Vehicular EnvironmentThe purpose of the recommended practice is to identify performance enhancement settings that provide improvements in throughput, latency ... active Project
802.22.3 - Standard for Spectrum Characterization and Occupancy SensingThe purpose is to specify operating characteristics of the components of the Spectrum Characterization and Occupancy Sensing System. active Project