Guidance for synchronization, calibration, testing, and installation of phasor measurement units (PMUs) applied in power systems is provided. The following are addressed in this guide: (a) Considerations for the installation…
This standard provides requirements for the test and review of software user documentation as part of the life cycle processes. It defines the documentation process from the viewpoint of the…
Recommendations are given for reactors intended for series connection, in both transmission and distribution systems, to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type…
Applications information on fixed-voltage and gated-thyristor surge protective components (SPCs) is provided. Key device parameters and their sensitivities are explained. Several worked telecommunication circuit design examples are given.
Seismic design recommendations for substations, including qualification of different equipment types are discussed. Design recommendations consist of seismic criteria, qualification methods and levels, structural capacities, performance requirements for equipment operation,…
A method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along with a mathematical method, sources of the values to be used in…
Information on the specification and selection of power, control, and special-purpose cable, as typically used in petroleum, chemical, and similar plants, is provided in this guide. Materials, design, testing, and…
Required definitions, ratings, and procedures for performing design tests, production tests, and construction requirements for capacitor switches for ac systems from 1 kV to 38 kV are covered in this…
Bar code label requirements for specific types of distribution transformers and step-voltage regulators are covered in this standard. Data content for temporary and permanent bar-code labeling is described as well…
