Conformance tests and requirements for the integrity of above grade pad-mounted enclosures that contain apparatus energized in excess of 600 volts and that may be exposed to the public including, but not limited to, the following types of equipment enclosures: pad-mounted capacitors or inductors, pad-mounted distribution transformers, pad-mounted junction enclosures, pad-mounted metering equipment, pad-mounted switchgear, and pad-mounted voltage regulators are covered.
- Standard Committee
- PE/TR - Transformers
- Joint Sponsors
-
PE/SWG
- Status
- Superseded Standard
- PAR Approval
- 2010-09-30
- Superseded by
- C57.12.28-2023
- Superseding
- C57.12.28-2005
- Board Approval
- 2014-05-16
- History
-
- Published:
- 2014-07-15
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.12.28 - Distribution - Enclosure Integrity Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Daniel Mulkey
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.12.28-2023
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
Conformance tests and requirements for the coating integrity of above grade pad-mounted enclosures that contain apparatus energized in excess of 600 V and that may be exposed to the general public. These include, but are not limited to, the following types of equipment enclosures: pad-mounted capacitors or inductors, pad-mounted distribution transformers, pad-mounted junction enclosures, pad-mounted metering equipment, and pad-mounted voltage regulators.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.28-2005
IEEE Standard for Pad-Mounted Equipment - Enclosure Integrity
Conformance tests and requirements for the integrity of above-grade pad-mounted enclosures that contain apparatus energized in excess of 600 V and that may be exposed to the public, including but not limited to the following types of equipment enclosures--pad-mounted capacitors or inductors, pad-mounted distribution transformers, pad-mounted junction enclosures, pad-mounted metering equipment, and pad-mounted switch gear--are covered.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards