Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power lines and for the calibration of the meters used in these measurements…
Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current 9ac) overhead power lines and for the calibration of the meters used in these measurements…
A recommended practice for the design and operation of electric systems in health care facilities is provided. The term health care facility as used here encompasses buildings or parts of…
Rigid-bus structures for outdoor and indoor, air-insulated, and alternating-current substations are covered. Portions of this guide are also applicable to strain-bus structures or direct-current substations, or both. Ampacity, radio influence,…
Rigid-bus structures for outdoor and indoor, air insulated, and alternating current substations are covered. Portions of this guide are also applicable to strain bus structures or direct current substations, or…
Thermal limit curves for induction machines are defined. A procedure is established for the presentation of these curves, and guidance for the interpretation and use of these curves for machine…
The purpose of this standard is to define thermal limit curves and to establish a standard procedure for the construction and presentation of these curves. The working group will also…
Recommended practices for designing, installing, and maintaining electric heat tracing systems are provided. These electric heat tracing systems are applied, both for critical process temperature control and for process temperature…
