This standard defines synchronized phasor measurements used in power system applications. It provides a method to quantify the measurement, tests to be sure the measurement conforms to the definition, and…
This guide sets forth recommendations believed essential for the application of overcurrent protective devices that limit the exposure time of dry-type transformers to short-circuit currents. This guide is not intended…
Reaffirmed December 2010. This guide provides assistance in selecting the most appropriate type of surge protector for a particular data, communication, and/or signaling circuit application. The purpose of this guide…
The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium local area networks are described. The control characteristics for full…
This amendment includes special requirements better suited for generator circuit breakers used to protect smaller generators rated between 10 MVA and 50 MVA and between 50 MVA and 100 MVA.…
Revision of IEEE Std C37.40-1993 and C37.40b-1996. Superseded by IEEE C37.41-2016. Service conditions and definitions for high-voltage fuses (above 1000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and…
Revision of IEEE Std C37.90.2-1995. Design tests for relay and relay systems that relate to the immunity of this equipment to Radiated Electromagnetic Interference from Transceivers are specified. Field strength,…
This IEEE Standard is part of the C37 Family on Switchgear, Substations & Protective Relays. Project scope: This standard describes the interconnection details for N times 64 kilobit per second…
