Revision of IEEE Std C37.011-1994 Procedures and calculations necessary to apply the standard transient recovery voltage (TRV) ratings for ac high-voltage circuit breakers rated above 1000 V and on a…
Guidance for the application of ac high-voltage circuit breakers for capacitance current switching is provided. The document addresses the general theory of capacitance current switching, the notion of restrike, reignition,…
Revision of IEEE Std 522-1992 Suggestions are made for testing the dielectric strength of the insulation separating the various turns from each other within multiturn form-wound coils to determine their…
Reaffirmed March 2012. A generic specification, including design and testing, for transmission modular restoration structure components used by electric utilities is provided.
This guide provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their…
Certain electrical, dimensional, and mechanical characteristics are set forth as well as certain safety features of three-phase, 60 Hz., mineral-oil-immersed, self-cooled, pad-mounted, compartmental-type distribution transformers. These transformers are rated 2500…
The design, performance, use, testing, and installation of temporary protective grounding systems, including the connection points, as used in permanent and mobile substations,are covered in this guide.
An approach to prepare a specification for an electronic device connected in series to compensate voltage fluctuations is presented.This guide intends to provide a base specification to allow users to…
This recommended practice provides information on the use of high direct voltage for proof tests and for periodic diagnostic tests on the ground wall insulation of stator (armature) windings in…
