This standard covers electrical and mechanical performance and test requirements for tap changers installed in voltage regulating power and distribution transformers of all voltage and kVA ratings. It covers load tap changers (LTCs), also known as on-load tap changers (OLTCs), which can change taps while the transformer is energized and carrying load; and it covers de-energized tap changers (DETCs), also known as off-circuit tap changers, which may be operated only while the transformer is not energized. For load tap changers, this standard covers both resistor and reactor types. It also covers certain aspects of the attendant tap changer motor-drive mechanism. It does not cover the tap changer control system (manual or automatic).
Working Group Details
Standard Performance requirements and test methods for Tap-changers
This standard covers electrical and mechanical performance and test requirements for on-load tap-changers of both resistor and reactor types, deenergized tap-changers, and their motor-drive mechanisms installed in power and distribution transformers, reactors and voltage regulators.
IEEE/IEC International Standard for TAP-changers --Part 2: Application guidelines
This part of IEC 60214 is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers.
IEEE Standard Requirements for Load Tap Changers
Electrical and mechanical performance and test requirements for load tap changers installed in power transformers and voltage regulating transformers of all voltage and kVA ratings are covered.