Electrical and mechanical performance and test requirements for load tap changers installed in power transformers and voltage regulating transformers of all voltage and kVA ratings are covered.
- Sponsor Committee
- PE/TR - Transformers
Learn More About PE/TR - Transformers - Status
- Superseded Standard
- Superseded by
- C57.131-2012
- Board Approval
- 1995-03-16
- History
-
- Published:
- 1995-09-21
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/TR - Transformers
Learn More About PE/TR - Transformers - Working Group
-
TapChgr - Power Transformers - Tap Changers
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Craig Colopy
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
60214-2-2019
IEEE/IEC International Standard for TAP-changers --Part 2: Application guidelines
This part of IEC 60214 is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers.
C57.131-2024
IEEE Standard Performance Requirements and Test Methods for Tap-Changers
Electrical and mechanical performance and test requirements for on-load tap-changers of both resistor and reactor types, de-energized tap-changers, and their motor-drive mechanisms installed in power and distribution transformers, reactors, and voltage regulators are covered.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C57.131-2012
IEEE Standard Requirements for Tap Changers
This standard covers electrical and mechanical performance and test requirements for tap changers installed in voltage regulating power and distribution transformers of all voltage and kVA ratings. It covers load tap changers (LTCs), also known as on-load tap changers (OLTCs), which can change taps while the transformer is energized and carrying load; and it covers de-energized tap changers (DETCs), also known as off-circuit tap changers, which may be operated only while the transformer is not energized. For load tap changers, this standard covers both resistor and reactor types. It also covers certain aspects of the attendant tap changer motor-drive mechanism. It does not cover the tap changer control system (manual or automatic).