Guidance for the application of ac high-voltage circuit breakers for shunt reactor switching is provided. Overvoltage generation for the three cases of shunt reactors being directly grounded, ungrounded, or grounded through a neutral reactor is addressed in terms of derivation and limitation methods. Circuit breaker specification for the purpose and the use of laboratory test results to predict field performance is also covered by this guide.
- Standard Committee
- PE/SWG - Switchgear
- Status
- Active Standard
- PAR Approval
- 2015-06-11
- Superseding
- C37.015-2009
- Board Approval
- 2017-12-06
- History
-
- Published:
- 2018-03-16
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SWG - Switchgear
- Working Group
-
HVCB/C37.015 - C37.015 - Guide for the Application of Shunt Reactor Switching
- IEEE Program Manager
- Jennifer Santulli
Contact Jennifer Santulli - Working Group Chair
- Michael Crawford
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC37.015
Guide for the Application of Shunt Reactor Switching
This application guide applies to ac high-voltage (> 1000 V) circuit breakers rated for shunt reactor switching. This application guide provides the theoretical background of shunt reactor switching and how information obtained from test results and system studies should be used to predict overvoltages in the field and gives suggestions how to mitigate these overvoltages.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C37.015-1993
IEEE Application Guide for Shunt Reactor Switching
Guidance for the application of ac high-voltage circuit breakers for shunt reactor switching is provided. Overvoltage generation for the three cases of directly grounded, ungrounded, and neutral reactor grounded shunt reactors is addressed in terms of derivation and limitation methods. Circuit breaker specification for the purpose and the use of laboratory test results to predict field performance is also covered by this guide.
C37.015-2009
IEEE Guide for the Application of Shunt Reactor Switching
This application guide applies to ac high-voltage circuit breakers rated for shunt reactor switching. The guide covers the specific cases of switching directly grounded shunt reactors, ungrounded shunt reactors and shunt reactors grounded through a neutral reactor. Directly grounded reactors are common on systems having a voltage of 60 kV and above, while ungrounded reactors are commonly applied on systems having a voltage below 60 kV. Schemes where the reactor is grounded through a neutral reactor are usually only applied on systems having a voltage of 60 kV and above. Whereas this application guide is directed towards circuit breakers, it is recognized and accepted that other switching devices such as high voltage load break switches and circuit switchers are capable of shunt reactor switching and this guide may be applied as appropriate.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards