Various approaches to good construction practices that could improve the installation of transmission line structure foundations are presented. Spread foundations, drilled shaft foundations, pile foundations, and anchors are treated. This guide is intended to be used as a reference source for those involved in the ownership, design, and construction of transmission structures.
- Standard Committee
- PE/T&D - Transmission and Distribution
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2002-03-21
- Superseding
- 977-1991
- Board Approval
- 2010-09-30
- History
-
- ANSI Approved:
- 2011-08-12
- Published:
- 2011-02-15
- Inactivated Date:
- 2021-03-25
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/T&D - Transmission and Distribution
- Working Group
-
TPC-15.11.03 - Construction of Overhead Lines Working Group
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Robert Millies
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P524
Guide for the Installation of Overhead Transmission Line Conductors
This guide provides general recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires. The guide also includes a comprehensive list of definitions for equipment and tools used in stringing and for stringing terms commonly employed. This guide does not address special conductors such as those used for river and canyon crossing because they may be custom designed and often may require special considerations.
P977
Guide to Installation of Foundations for Transmission Line Structures
This guide presents various approaches to good practice that improve the installation of transmission line structure foundations. This guide covers only the construction aspects of the installation of the foundations.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
524-2016
IEEE Guide for the Installation of Overhead Transmission Line Conductors
General recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires are provided.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
524-2003
IEEE Guide to the Installation of Overhead Transmission Line Conductors
Revision of IEEE Std 524-1992. SUMMARY: This guide provides general recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires. The guide also includes a comprehensive list of definitions for equipment and tools used in stringing and for stringing terms commonly employed. This guide does not address special conductors such as those used for river and canyon crossing. These conductors may be custom designed and often may require special considerations.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards