This document is a companion to Technical Committee Report on Recommended Practices for Burst Measurements in the Time Domain, IEEE No. 257, May 1964. In the time domain document, bursts are defined and particular attention is placed on their duration and magnitude. The use of additional characteristics may prove desirable when investigating both cause and effect of a burst. Mathematical transformations have been widely used to bring out particular characteristics of signals. Perhaps the one most commonly used is the Fourier Transform, which defines the spectrum of signals. The energy density spectrum of a burst, a quantity derived from the Fourier Transform, is the subject of this report. Other transformations such as those of Hilbert or Hankel, may be used to display different characteristics of a burst but they will not be considered here. Sampling the energy density spectrum is the key concept of this document. It constitutes the basis by which this spectrum can be characterized comprehensively by a practical number of measurements. The sampling theorems in the frequency domain are, therefore, given detailed consideration in Appendices to the extent necessary for understanding the measurement methods to be discussed.
- Standard Committee
- SASB/SASB - Standards Association Standards Board
- Status
- Inactive-Withdrawn Standard
- Board Approval
- 1966-02-01
- History
-
- Published:
- 1966-01-31
Working Group Details
- Society
- Standard Committee
- SASB/SASB - Standards Association Standards Board
- Working Group
-
ADMIN - Project Administration
- IEEE Program Manager
- Soo Kim
Contact Soo Kim
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards