
This guide provides mathematical models for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which workers could be exposed during their work on or near electrical equipment. An errata is available at https://standards.ieee.org/wp-content/uploads/import/documents/erratas/1584-2018_errata.pdf. Additional files can be found at https://ieee-dataport.org/open-access/arc-flash-ie-and-iarc-calculators
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Status
- Active Standard
- PAR Approval
- 2013-12-11
- Superseding
- 1584-2002
- Board Approval
- 2018-09-27
- History
-
- Published:
- 2018-11-30
Additional Resources
- Erratas
- 1584-2018_errata.pdf
- Downloads
- arc-flash-ie-and-iarc-calculators
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Working Group
-
1584_WG - Arc Flash Hazard Calculations Working Group
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Daleep Mohla
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1584
Guide for Performing Arc-Flash Hazard Calculations
This guide provides calculation models and analytical processes for determining the predicted incident thermal energy and the arc-flash boundary. The guide covers electrical equipment and conductors for three-phase alternating current (ac) systems with nominal voltages ranging from 208 V to 15 kV. However, this guide does not include calculations for single-phase ac systems, direct current (dc) systems, short circuit or overcurrent protective device coordination studies, or recommendations for personal protective equipment (PPE).
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1584.1-2022
IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584
Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584, is provided in this document. The minimum recommended requirements to enable the owner to specify an arc-flash hazard calculation study, including scope of work and associated deliverables, is outlined.
1584.2-2025
IEEE Approved Draft Guide and Checklists for the Data Collection for Performing an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std. 1584™ and IEEE Std.1584.1™ for Systems Operating at Three-Phase 50/60 Hz Alternating Current (AC) 1000 V and below
Guidance for the checklists and collection of data required for performing an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584™, is provided in this document. The focus is on three-phase 50/60 Hz alternating current (ac) systems operating at 1000 V and below.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1584-2002
IEEE Guide for Performing Arc Flash Hazard Calculations
This guide provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment. Included are 2 Arc Flash Hazard Calculators and 3 Test Data files. Contact [email protected] for these additional files. An interpretation is available at http://standards.ieee.org/reading/ieee/interp/1584-2002.html
1584.1-2013
IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)
Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584(TM), is provided in this document. It outlines the minimum recommended requirements to enable the owner or its representative to specify an arc-flash hazard study, including scope of work and associated deliverables.
1584a-2004
IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 1
Amendment to 1584-2002 This amendment provides additions and corrections to IEEE Std 1584-2002.
1584b-2011
IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 2: Changes to Clause 4
Techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment are provided in IEEE Std 1584-2002 and IEEE Std 1584a-2004. Changes in Clause 4 (the analysis process), based on the experience of persons who have conducted many of these studies, are provided in this amendment.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards