IEC 61000-4-15:2010 is adopted by this standard. IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flicker meters complying with this standard. The object of IEC 61000-4-15:2010 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity.
- Sponsor Committee
- PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution - Status
- Superseded Standard
- PAR Approval
- 2011-09-10
- Superseded by
- 1453-2015
- Board Approval
- 2011-09-10
- History
-
- ANSI Approved:
- 2013-01-15
- Published:
- 2011-10-21
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution - Working Group
-
PQ-1453_WG - Light Flicker Working Group
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Harish Sharma
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1453-2022
IEEE Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
Background information on supply voltage fluctuations caused by fluctuations in power demands of installations is provided by this standard. The manifestation of these supply voltage fluctuations as lamp flicker is presented in this standard. A flicker measurement method using a meter that is described in IEC 61000-4-15 is presented in this standard. The short-term (Pst) and long-term (Plt) indices used for the quantification of lamp flicker are defined in this standard. For different system voltages, planning levels for flicker that the utilities need their system to be limited to in order to reduce customer complaints are defined in this standard. The procedure for determining emission limits for individual installations at the point of common coupling (PCC) so that the planning levels can be achieved in practice is defined in this standard. Then, an assessment procedure for evaluating flicker compliance against emission limits is described. Methodologies to analyze background flicker to identify the flicker contribution of individual sources are also presented in this standard. Rapid voltage changes (RVCs) that are caused by various system events such as switching of capacitor banks, energization of power transformers, and starting of induction motors are also addressed by this standard. Methods to estimate flicker or RVCs at the PCC for various types of fluctuating installations are provided by this document. Example terms and language that can be the basis for defining relative responsibilities and assessment methods for installations that may cause flicker and RVCs are included in the document.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1453-2015
IEEE Recommended Practice for the Analysis of Fluctuating Installations on Power Systems
Background on light flicker caused by fluctuations in power demands of variable loads is presented in this recommended practice. A flicker measurement method is presented using a meter that is completely described in IEC 61000-4-15. The short-term (Pst) and long-term (Plt) flicker indices used for the analysis of flicker data are defined. Flicker limits for various voltage levels are presented. An assessment procedure for evaluating flicker compliance against emission limits is described. Methodologies to analyze background flicker to identify the flicker contribution of single loads are also presented.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
1453-2004
IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
Adoption of IEC 61000-4-15. Voltage fluctuations on electric power systems sometimes give rise to noticeable illumination changes from lighting equipment. This phenomenon is often referred to as flicker, lamp flicker, and sometimes voltage flicker. This recommended practice provides specifications for measurement of this phenomenon and recommends acceptable levels for 120 V, 60 Hz and 230 V, 50 Hz AC electric power systems. It does not make any flicker emission specifications for certification of individual products manufactured for use on these systems.
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1453.1-2012
IEEE Guide--Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)--Limits--Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
IEC/TR 61000-3-7:2008 is adopted by this guide. IEC 61000-3-7:2008 provides guidance on the principles that can be used as the basis for determining the requirements for the connection of fluctuating installations to MV, HV, and EHV power systems (LV installations are covered in other IEC documents). The primary objective of this guide is to provide guidance to system operators or owners on engineering practices that will facilitate adequate service quality for all connected customers. This guide provides a methodology to allocate the capacity of the system to absorb voltage fluctuations (i.e., flicker). However, it does not address how to mitigate voltage fluctuations, nor does it address how to increase the capacity of the system to absorb such disturbances. Since the procedures outlined in this guide are necessarily based on certain simplifying assumptions, the approach will not always provide an optimum solution. The recommended approach should be used with flexibility and engineering judgment, when applying the given assessment procedures in full or in part.