Project Icon

Wired and Wireless Communications Projects

Displaying results 1 - 40 of 52
Project Name
StatusHelp
P802.1AR - Secure Device Identity This standard defines a standard identifier for IEEE 802 devices that is cryptographically bound to that device, and defines a standard mechanism... Active Project
P802.1AS - Timing and Synchronization for Time-Sensitive Applications This standard enables stations attached to bridged LANs to meet the respective jitter, wander, and time synchronization requirements for time... Active Project
P802.1AX - Link Aggregation Link Aggregation allows the establishment of full-duplex point-to-point links that have a higher aggregate bandwidth than the individual links... Active Project
P802.1CB - Draft - Frame Replication and Elimination for Reliability This standard specifies procedures, managed objects and protocols for bridges and end systems that provide identification and replication of... Active Project
P802.1CF - Recommended Practice for Network Reference Model and Functional Description of 802 Access Network Heterogeneous networks may include multiple network interfaces, multiple network access technologies, and multiple network subscriptions. In some... Active Project
P802.1CM - Time-Sensitive Networking for Fronthaul The purpose of this standard is to enable the transport of time sensitive fronthaul streams in Ethernet bridged networks. Active Project
P802.1CQ - Multicast and Local Address Assignment This standard specifies protocols, procedures, and management objects for locally-unique assignment of 48-bit and 64-bit addresses in IEEE 802... Active Project
P802.1CS - Link-local Registration Protocol Link-local Registration Protocol is designed to facilitate the creation of application protocols that distribute information through all or part... Active Project
P802.1Q - Bridges and Bridged Networks Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate individual LANs. Active Project
P802.1Qcc - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks Amendment: Stream Reservation Protocol (SRP) Enhancements and Performance Improvements MAC Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate... Active Project
P802.1Qcj - Bridges and Bridged Networks Amendment: Automatic Attachment to Provider Backbone Bridging (PBB) services Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate individual LANs. Active Project
P802.1Qcn - Bridges and Bridged Networks Amendment: Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) Extension to Support Network Virtualization Overlays Over Layer 3 (NVO3) Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate individual LANs. Active Project
P802.1Qcp - Bridges and Bridged Networks Amendment: YANG Data Model Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate individual LANs. Active Project
P802.1Qcr - Bridges and Bridged Networks Asynchronous Traffic Shaping Bridges, as specified by this standard, allow the compatible interconnection of information technology equipment attached to separate individual LANs. Active Project
P802.1Xck - Port-Based Network Access Control Amendment: YANG Data Model IEEE 802 LANs are deployed in networks that convey or provide access to critical data, that support mission critical applications, or that charge... Active Project
P802.3.2 - Ethernet YANG Data Model Definitions The purpose of the standard is to define YANG models for IEEE Std 802.3 and publish these models in a machine-readable format. Active Project
P802.3 - Ethernet This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... Active Project
P802.3bs - Draft Ethernet Amendment 10: Media Access Control Parameters, Physical Layers and Management Parameters for 200 Gb/s and 400 Gb/s Operation This amendment to IEEE Std 802.3-2015 adds Clause 116 through Clause 124 and Annex 119A through Annex 120E. This amendment includes IEEE 802.3... Active Project
P802.3bt - Draft Ethernet Amendment: Physical Layer and Management Parameters for DTE Power via MDI over 4-Pair This amendment to IEEE Std 802.3-2015 increases the maximum PD power available by utilizing all four pairs in the specified structured wiring... Active Project
P802.3cb - Draft Ethernet Amendment: Physical Layer Specifications and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation over Backplane This amendment to IEEE Std 802.3-2015 defines Ethernet Media Access Control (MAC) parameters, physical layer specifications, and management... Active Project
P802.3cc - Draft Ethernet Amendment: Physical Layer and Management Parameters for Serial 25 Gb/s Ethernet Operation Over Single-Mode Fiber This amendment to IEEE Std 802.3-2015 adds Physical Layer (PHY) specifications and management parameters for 25 Gb/s operation over single-mode... Active Project
P802.3cd - Ethernet Amendment: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... Active Project
P802.3cg - Ethernet Amendment: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation over Single Balanced Twisted-pair Cabling and Associated Power Delivery This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... Active Project
P802.3ch - Ethernet Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive Ethernet This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... Active Project
P802.11 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... Active Project
P802.11ak - Draft Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 4: Enhancements For Transit Links Within Bridged Networks This amendment specifies protocols, procedures, and managed objects to enhance the ability of IEEE P802.11 media to provide transit links internal... Active Project
P802.11aq - Draft Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Pre-Association Discovery This amendment defines modifications to IEEE Std 802.11 2016, above the physical layer (PHY), to enable delivery of pre-association service... Active Project
P802.11ax - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment Enhancements for High Efficiency WLAN The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... Active Project
P802.11ay - Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications-Amendment: Enhanced Throughput for Operation in License-Exempt Bands Above 45 GHz The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... Active Project
P802.11az - Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Enhancements for Positioning The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... Active Project
P802.11ba - Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Wake-up radio operation The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... Active Project
P802.15.4-2015/Cor 1 - Low-Rate Wireless Networks - Corrigendum 1 The standard provides for ultra low complexity, ultra low cost, ultra low power consumption, and low data rate wireless connectivity among... Active Project
P802.15.4 - Low-Rate Wireless Networks The standard provides for ultra low complexity, ultra low cost, ultra low power consumption, and low data rate wireless connectivity among... Active Project
P802.15.4r - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment for Radio based Distance Measurement Techniques This standard defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low data rate (typically less than... Active Project
P802.15.4s - Low-Rate Wireless Networks: Amendment Enabling Spectrum Resource Measurement Capability The standard provides for ultra low complexity, ultra low cost, ultra low power consumption, and low data rate wireless connectivity among... Active Project
P802.15.7 - Short-Range Optical Wireless Communications This standard provides a global standard for short-range optical wireless communication. The standard provides (i) access to several hundred THz... Active Project
Displaying results 1 - 40 of 52 - all