Project Icon

Electromagnetic Compatibility Projects

Displaying results 1 - 23 of 23
Project Name
StatusHelp
P145 - Standard Definitions of Terms for Antennas Many individuals and organizations are involved in the design, manufacture, measurement and use of antennas for many different applications. This... Active Project
P211 - Standard Definitions of Terms for Radio Wave Propagation This standard is published for the purpose of promoting clarity and consistency in the use of radio wave propagation terminology . The purpose of... Active Project
P299.1 - Draft Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having All Dimensions between 0.1 m and 2 m The purpose of this standard is to provide a standard test procedure for the measurement of the effectiveness of shielded enclosures and boxes... Active Project
P430 - Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations Document will not contain a purpose Active Project
P1309 - Draft Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz This standard provides consensus calibration methods for electromagnetic field sensors and probes. Calibration organizations and other users need... Active Project
P1453 - Recommended Practice for the Analysis of Fluctuating Installations on Power Systems This document provides guidance to system operators, owners, and engineers that are responsible for providing electrical service to loads that... Active Project
P1528 - Draft Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques The purpose of this recommended practice is to provide a protocol for the measurement of the peak spatial-average SAR in an anatomical model of... Active Project
P1642 - Draft Recommended Practice for Protecting Public Accessible Computer Systems from Intentional EMI The users will be those that build computer systems that are to be used by the public but require a high level of security to prevent interference... Active Project
P1688 - Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules The purpose of the standard is to provide interface and associated verification requirements for the control of the electromagnetic interference ... Active Project
P1836 - Electromagnetic Compatibility (EMC) - Limits for Harmonic Current Emissions Produced by Equipment Connected to Public Low-Voltage Systems with Input Current <= 16 A Per Phase This standard provides users the procedures for determining harmonic content on the power line for those systems that use 60 Hz and 120V/240V... Active Project
P1837 - Electromagnetic Compatibility (EMC) - Limits for Harmonic Current Emissions Produced by Equipment Connected to Public Low-Voltage Systems with Input Current > 16 and <= 75 A per phase This standard provides users the procedures for determining harmonic content on the power line for those systems that use 60 Hz and 120V/240V... Active Project
P1900.1 - Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management New concepts and technologies are rapidly emerging in the fields of spectrum management, spectrum trading, cognitive radio, dynamic spectrum... Active Project
P62704-1 - Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 1: General Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations This standard describes the concepts, anatomical models for compliance assessments, techniques, validation procedures, uncertainties and... Active Project
P62704-2 - Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 2: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Vehicle Mounted Antenna Configurations Document will not contain a purpose clause. Active Project
P62704-3 - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 3: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Mobile Phones/Personal Wireless Devices This standard will not contain a purpose clause Active Project
P62704-4 - Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: General Requirements for Using the Finite Element Method (FEM) for SAR Calculations and Specific Requirements for Modeling Vehicle-Mounted Antennas and Personal Wireless Devices Document will not contain a purpose clause Active Project
PC63.10 - Draft American National Standard of procedures for compliance testing of unlicensed wireless devices A wide variety of unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are... Active Project
PC63.17 - Draft American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices This standard sets forth uniform methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications... Active Project
PC95.1-2345 - the Evaluation and Control of Personnel Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz The purpose of this standard is to protect personnel against established adverse health effects associated with exposure to electric, magnetic and... Active Project
PC95.1 - Safety Levels with Respect to Human Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz The purpose of this standard is to provide rational, science-based exposure values to protect against established adverse effects to human health... Active Project
PC95.2 - Radio-Frequency Energy and Current-Flow Symbols The purpose of this standard is to provide guidance on the standardized design of warning symbols that may be used on alerting signs for informing... Active Project
PC95.3 - Recommended Practice for Measurements and Computations of Electric, Magnetic and Electromagnetic Fields With Respect to Human Exposure to Such Fields, 0 Hz-300 GHz The purpose of this recommended practice is to specify techniques and instrumentation for the measurement and computation of potentially hazardous... Active Project
PC95.7 - Recommended Practice for Radio Frequency Safety Programs - 3 kHz to 300 GHz These guidelines are provided to assist in the development of RF safety programs for the use of RF energy-producing devices, equipment, and... Active Project
Displaying results 1 - 23 of 23