Standard Icon

Corporate Standards

Standard Name
1149.7-2009 - IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan ArchitectureThis specification describes circuitry that may be added to an integrated circuit to provide access to on-chip test access ports (TAPs) specified by IEEE Std 1149.1-2001. The circuitry uses IEEE 1149.1-2001 as its foundation, providing complete backward compatibility, while aggressively adding features to support test and applications debug. It defines six classes of 1149.7 test access ports ... Active Standard
1364-2005 - IEEE Standard for Verilog Hardware Description LanguageThe Verilog hardware description language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all phases of the creation of electronic systems. Because it is both machine-readable and human-readable, it supports the development, verification, synthesis, and testing of hardware designs; the communication of hardware design data; and the maintenance,... Active Standard
1450.6.1-2009 - IEEE Standard for Describing On-Chip Scan CompressionThis standard defines how the necessary information is passed from scan insertion to pattern generation and from pattern generation to diagnosis such that different tool vendors could be used for each step independent of on-chip scan compression logic used. Active Standard
1584-2002 - IEEE Guide for Performing Arc Flash Hazard CalculationsThis guide provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment. Included are 2 Arc Flash Hazard Calculators and 3 Test Data files. Contact for these additional files. An interpretation is available at http:/... Active Standard
1616-2004 - IEEE Standard for Motor Vehicle Event Data Recorder (MVEDR)Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This standard defines a protocol for MVEDR output data compatibility and export protocols of MVEDR data elements. This standard does not prescribe which specific data elements shall be recorded, or how the data are to be collected, recorded and stored. It is... Active Standard
1625-2008 - IEEE Standard for Rechargeable Batteries for Multi-Cell Mobile Computing DevicesThis standard establishes criteria for design analysis for qualification, quality, and reliability of rechargeable battery systems for multi-cell mobile computing devices. It also provides methods for quantifying the operational performance of these batteries and their associated management and control systems including considerations for end-user notification. This standard covers... Active Standard
1666-2011 - IEEE Standard for Standard SystemC Language Reference ManualSystemC(R) is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers and architects who need to address complex systems that are a hybrid between hardware and software. This standard provides a precise and complete definition of the SystemC class library so that a SystemC implementation can be developed with reference to this... Active Standard
1667-2009 - IEEE Standard for Authentication in Host Attachments of Transient Storage DevicesThis project defines a standard protocol for secure authentication and creation of trust between a secure host and a directly attached Transient and other Storage Devices, such as a USB flash drive, portable hard drive, or cellular phone. The protocol has only an indirect relationship with data integrity/security, and does not directly address issues of authorization and enforcement. The... Active Standard
1685-2014 - IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsConformance checks for eXtensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. The meta-data forms that are standardized include components, systems, bus interfaces and connections, abstractions of those buses, and details of the components including address maps, register and field descriptions, and file set descriptions for use in... Active Standard
1725-2011 - IEEE Standard for Rechargeable Batteries for Cellular TelephonesCriteria for design analysis for qualification, quality, and reliability of rechargeable lithium ion and lithium ion polymer batteries for cellular telephone applications are established. Also included are: battery pack electrical and mechanical construction, packaging technologies, pack and cell level charge and discharge controls, and overall system considerations. Active Standard
1734-2011 - IEEE Standard for Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) DesignsA standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model for IP quality measurement, is defined. It includes a schema and the terms that are relevant for measuring IP quality, including the software that executes on the system. The schema and information model can be focused to represent particular categories of... Active Standard
1735-2014 - IEEE Approved Draft Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP)Distribution of electronic design intellectual property (EDIP) creates a risk of unsanctioned use and dilution of the investment in its creation. This standard provides guidance on technical protection measures to those who produce, use, process, or standardize the specifications of such electronics design descriptions. These measures include protection through encryption, specification, and... Active Standard
1800-2012 - IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification LanguageThe definition of the language syntax and semantics for SystemVerilog, which is a unified hardware design, specification, and verification language, is provided. This standard includes support for modeling hardware at the behavioral, register transfer level (RTL), and gate-level abstraction levels, and for writing testbenches using coverage, assertions, object-oriented programming, and... Active Standard
1801-2013 - IEEE Standard for Design and Verification of Low-Power Integrated CircuitsA method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the design in the context of a given power management architecture, and for driving implementation of that power management architecture. The method supports incremental refinement of power intent specifications required for IP-based design flows. Active Standard
1801a-2014 - IEEE Standard for Design and Verification of Low-Power Integrated Circuits--Amendment 1The set of changes required to address technical and editorial errors that have been identified in IEEE Std 1801-2013 are specified in this amendment. In addition this amendment also specifies a few changes and enhancements to remove some ambiguities and inconsistencies related to the semantics of power states, power supplies, precedence rules, and location of power management cells. (The PDF... Active Standard
1850-2010 - IEEE Standard for Property Specification Language (PSL)The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system behavior, compatible with multiple electronic system design languages, including IEEE Std 1076™ (VHDL®), IEEE Std 1354 (Verilog®), IEEE Std 1666™ (SystemC®), and IEEE Std 1800™ (SystemVerilog®), thereby enabling a common specification and verification flow... Active Standard
1860-2014 - IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and AboveThis guide applies to voltage and reactive power control in 1000 kV and above ac systems. It establishes criteria and requirements for electric power utilities in the planning, design, infrastructure, operation, and scientific research of voltage or reactive power in 1000 kV and above ac systems, which should guarantee the system stability and equipment safety. Active Standard
1861-2014 - IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and AboveOn-site acceptance tests of ultra-high-voltage power equipment are subject to this guide. Criteria and requirements for test items, conditions, methods, and results are established. The stated specifications and requirements, both technical and for testing, are universally needed for acceptance tests on-site and commissioning of ultra-high-voltage power equipment, including power transformers,... Active Standard
1862-2014 - IEEE Recommended Practice for Overvoltage and Insulation Coordination of Transmission Systems at 1000 kV AC and AboveThis recommended practice specifies the procedure for selection of insulation levels of UHV AC transmission lines and substations. It also specifies reliability criterion under switching overvoltage and lightning overvoltage. It also suggests the calculation methods of insulation coordination design. According to the characteristics of UHV AC systems, overvoltages mitigation measures are... Active Standard
1888-2014 - IEEE Standard for Ubiquitous Green Community Control Network ProtocolThe standard identifies gateways for field-bus networks, data storage for archiving and developing data sharing platforms, and application units as important system components for developing digital communities, i.e., building-scale and city-wide ubiquitous facility networking infrastructure. The standard defines a data exchange protocol that generalizes and interconnects these components ... Active Standard
1888.1-2013 - IEEE Standard for Ubiquitous Green Community Control Network: Control and ManagementThis standard describes network gateway access, control, and management; specifies control and management requirements; defines the system architecture, communication sequences, and enhanced functions for the protocols defined in IEEE 1888™, “Ubiquitous Green Community Control Network Protocol”; and extends the protocols and interfaces based on the requirements. This standard shall provide... Active Standard
1888.2-2014 - IEEE Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and ScalabilityThis standard describes heterogeneous networks convergence and scalability, specifies the requirements of network convergence, extends the system architecture defined in IEEE Std 1888(TM), IEEE Standard for Ubiquitous Green Community Control Network Protocol, with two new IEEE 1888(TM) Components, i.e., the reconfigurable resolution server (RRS) and the intelligent application resolver (IAR),... Active Standard
1888.3-2013 - IEEE Standard for Ubiquitous Green Community Control Network: SecurityThe enhanced security management function for the protocol defined in IEEE 1888(TM), “Ubiquitous Green Community Control Network Protocol,” is described in this standard. Security requirements, system security architecture definitions, and a standardized description of authentication and authorization, along with security procedures and protocols, are specified. This standard can help avoid... Active Standard
1900.4-2009 - IEEE Standard for Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access NetworksThe standard defines the building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the building blocks, for enabling coordinated network-device distributed decision making that will aid in the optimization of radio resource usage, including spectrum access control, in heterogeneous wireless access networks. The... Active Standard
1900.4.1-2013 - IEEE Standard for Interfaces and Protocols Enabling Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless NetworksInterfaces and service access points defined in IEEE Std 1900.4TM are described in detail, enabling distributed decision making in heterogeneous wireless networks and obtaining context information for this decision making. Active Standard
1900.4a-2011 - IEEE Standard for Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks Amendment 1: Architecture and Interfaces for Dynamic Spectrum Access Networks in White Space Frequency BandsAdditional components of the IEEE 1900.4 system are defined in this amendment to enable mobile wireless access service in white space frequency bands without any limitation on used radio interface (physical and media access control layers, carrier frequency, etc.). Active Standard
1901-2010 - IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer SpecificationsA standard for high-speed communication devices via electric power lines, so called broadband over power line (BPL) devices, is defined. Transmission frequencies below 100 MHz are used. All classes of BPL devices can use this standard, including BPL devices used for the first-mile/last-mile connection to broadband services as well as BPL devices used in buildings for local area networks (LANs)... Active Standard
1901.2-2013 - IEEE Standard for Low-Frequency (less than 500 kHz) Narrowband Power Line Communications for Smart Grid ApplicationsA worldwide standard for narrowband power line communications (PLC) via alternating current, direct current, and nonenergized electric power lines using frequencies below 500 kHz. Data rates of up to 500 kb/s are supported. The field of use includes Smart Grid applications. Coexistence mechanisms that can be used by other PLC technologies operating below 500 kHz are also included. These... Active Standard
1902.1-2009 - IEEE Standard for Long Wavelength Wireless Network ProtocolThis standard defines the air interface for radiating transceiver radio tags using long wavelength signals (kilometric and hectometric frequencies, <450 kHz). Conforming devices can have very low power consumption (a few microwatts on average), while operating over medium ranges (0.5 to 30 meters) and at low data transfer speeds (300–9600 bits per s). They are well suited for visibility... Active Standard
1903-2011 - IEEE Standard for the Functional Architecture of Next Generation Service Overlay NetworksA framework of Internet Protocol (IP)-based service overlay networks is described and context-aware [e.g., such as required Quality of Service (QoS) level; type of service such as real time versus data; nature of data stream such as I-frame versus B-frame; and type of terminal such as TV monitor versus personal digital assistant], dynamically adaptive (e.g., using locally derived information... Active Standard
1904.1-2013 - IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)This standard describes the system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment. The specifications complement the existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperability at the Physical Layer (PHY) and Data Link Layer. Specifically included in this specification are - EPON system... Active Standard
1904.1-Conformance01-2014 - IEEE Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package AThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package A. Active Standard
1904.1-Conformance02-2014 - IEEE Approved Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package BThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package B. Active Standard
1904.1-Conformance03-2014 - IEEE Approved Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1, Package CThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package C. Active Standard
1905.1-2013 - IEEE Standard for a Convergent Digital Home Network for Heterogeneous TechnologiesAn abstraction layer for multiple home networking technologies that provides a common interface to widely deployed home networking technologies is defined in this standard: IEEE 1901 over power lines, IEEE 802.11 for wireless, Ethernet over twisted pair cable, and MoCA 1.1 over coax. Connectivity selection for transmission of packets arriving from any interface or application is supported by... Active Standard
2010-2012 - IEEE Recommended Practice for Neurofeedback SystemsA detailed set of documentation requirements is proposed. The detailed requirements for the documentation of neurofeedback instruments and software to provide quality and availability of information to users are specified. Active Standard
2030.5-2013 - IEEE Adoption of Smart Energy Profile 2.0 Application Protocol StandardThe 'APPLICATION' layer with TCP/IP providing functions in the 'TRANSPORT' and 'INTERNET' layers is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4(TM), IEEE 802.11(TM), IEEE 1901(TM)), a variety of lower layer protocols may be involved in providing a complete solution. Generally, lower layer protocols are not discussed in this standard except where there... Active Standard
2200-2012 - IEEE Standard Protocol for Stream Management in Media Client DevicesInterfaces for intelligently distributing and replicating content over heterogeneous networks to portable and intermediate devices with local storage are defined. Active Standard
2700-2014 - IEEE Standard for Sensor Performance Parameter DefinitionsA common framework for sensor performance specification terminology, units, conditions and limits is provided. Specifically, the accelerometer, magnetometer, gyrometer/gyroscope, barometer/pressure sensors, hygrometer/humidity sensors, temperature sensors, ambient light sensors, and proximity sensors are discussed. Active Standard
C50.12-2005 - IEEE Standard for Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and AboveThe requirements in this standard apply to all types of 50 Hz and 60 Hz salient-pole synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications. Active Standard