Workable methods for protecting wire-line telecommunication circuits entering electric supply locations are presented. The electric supply location environment; protection apparatus; service types, reliability, service performance objective classifications, and transmission considerations;…
A cryptographic protocol to provide integrity with optional confidentiality for cyber security of substation serial links is defined in this standard. It does not address specific applications or hardware implementations…
The MAC Service and the Internal Sublayer Service (ISS) are defined in this standard. This standard specifies media-dependent convergence functions that map IEEE 802(R) MAC interfaces to the ISS. The…
Physical Layer specifications and management parameters for 40 Gb/s operation over single-mode fiber (40GBASE-ER4) and for 100 Gb/s operation over multimode fiber (100GBASE-SR4) are added by this amendment. This amendment…
General considerations are presented for the electrical protection of telecommunications facilities serving electric supply locations. This standard contains material that is common to the IEEE 487(TM) family of standards (i.e.,…
The 'APPLICATION' layer with TCP/IP providing functions in the 'TRANSPORT' and 'INTERNET' layers is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4(TM), IEEE 802.11(TM),…
This guide documents accepted protection practices for transmission-to-generation interconnections. It is intended to cover the protection system applications at the interconnections between transmission systems and generation facilities greater than 10…
This document specifies the standard approach for mapping between IEEE Std 1815™ [Distributed Network Protocol (DNP3)] and IEC 61850 (Communications Networks and Systems for Power Utility Automation). Two primary use…
The following enclosed low-voltage ac power circuit breakers are covered in this standard: a) stationary or drawout type of two-, three-, or four-pole construction, with one or more rated maximum…
