Tag: Power and Energy

Overhead transmission line galloping is common in many countries, and the measurement and research for galloping have become increasingly necessary. Meanwhile, the development of machine vision technology provides a good…

The performance and functional capability requirements for DER connected with the Area Electric Power Systems (Area EPS) are defined in IEEE Std 1547(TM). This amendment revises the ranges of allowable…

The waveform of currents likely to exist on dc feeds to equipment located at the tops of towers due to a lightning strike, and the consequences of that waveform for…

Definitions and usage of terms used in the measurement and analysis of corona and field effects of overhead power lines are presented in this standard. Correlation between measurements from equipment…

Conformance tests and requirements for the coating integrity of carbon steel pole-mounted enclosures containing apparatus energized in excess of 600 V, and not for application in coastal or other severe…

The construction, mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, and accessories for a nonmetallic, all-dielectric self-supporting (ADSS) fiber optic cable are covered by this…

This standard applies to low-voltage gas discharge tube (GDT) surge-protective components for application on systems with voltages less than or equal to 1000 V rms or 1500 V dc. These…

This standard is applicable to bushings intended for use in high-voltage circuit breakers and gas-insulated switchgear. These bushings are intended for indoor and outdoor use, operating on alternating current with…

Conformance tests and requirements for the coating integrity of pole-mounted enclosures containing apparatus energized in excess of 600 V, and for application in coastal environments, are specified in this standard.…