Certain electrical, dimensional, and mechanical characteristics are set forth, as well as certain safety features of three-phase, 60 Hz, liquid-immersed, self-cooled, pad-mounted, compartmental-type distribution transformers. These transformers are rated 10…
A summary of the methods for detection, mitigation, and control of metallic shield corrosion in 5 kV to 46 kV underground distribution cable installed in conduit or direct buried is…
Test approaches and procedures for the components and the overall protection and control system functions are presented in this guide. Test of equipment in the system protection scheme, associated communications…
Recommendations are given for reactors intended for series connection, in both transmission and distribution systems, to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type…
This standard covers electrical, mechanical, dimensional, and related requirements for non-condenser bushings used in liquid-immersed distribution transformers covered by IEEE Std C57.12.20™, IEEE Std C57.12.34™, IEEE Std C57.12.36™, and IEEE…
This standard defines a common format for protection and control configuration or settings data files based on the IEC 61850 System Configuration Language (SCL) format. The format will specify organizational…
This standard provides qualification methods and criteria to establish the electromagnetic compatibility (EMC) of equipment in nuclear power plants and other nuclear facilities. The methods and criteria incorporated in this…
Power capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to alternating-current transmission and distribution systems operating at a nominal frequency of 50 Hz…
This part of IEC/IEEE 80005 describes low voltage shore connection (LVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This standard…
