Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (ac) overhead power lines and for the calibration of the meters used in these measurements…
The terms and definitions in this standard cover all high-voltage enclosed and non-enclosed, indoor and outdoor air switches rated in excess of 1000 V used primarily in connection with generation,…
Specific testing requirements for qualifying electrical resistance trace heating for use in industrial applications in ordinary locations, as well as a basis for electrical and thermal design, are included in…
Instructions for conducting generally applicable and accepted tests to determine the performance characteristics of synchronous machines are contained in this guide. Although the tests described are applicable in general to…
Current available devices that are being used in secondary network systems protections schemes are covered in this guide. These devices act to sense the fault and initiate fault interruption locally…
Information to assist in evaluating the effect of solar radiation on outdoor metal-enclosed switchgear including metal-enclosed bus and control switchboards is provided in this guide. Specific data in the form…
This Code covers basic provisions for safeguarding of persons from hazards arising from the installation, operation, or maintenance of (1) conductors and equipment in electric supply stations, and (2) overhead…
This standard prescribes methods for performing test specified in American National Standard General Requirements for Distribution, Power, and Regulating Transformers, C57.12.00-1973 (IEEE 462-1973) and in the separate transformer standards of…
Defined in this standard are elements and commonly used components in excitation systems. Also contained are definitions for excitation systems applied to synchronous machines. An included annex contains one-line block…
