Detailed procedures for analyzing gas from gas spaces or gas-collecting devices as well as gas dissolved in oil are described. The procedures cover: (1) the calibration and use of field instruments for detecting and estimating the amount of combustible gases present in gas blankets above oil, or in gas detector relays; (2) the use of fixed instruments for detecting and determining the quantity of combustible gases present in gas-blanketed equipment; (3) obtaining samples of gas and oil from the transformer for laboratory analysis; (4) laboratory methods for analyzing the gas blanket and the gases extracted from the oil; and (5) interpreting the results in terms of transformer serviceability. The intent is to provide the operator with positive and useful information concerning the serviceability of the equipment. An extensive bibliography on gas evolution, detection, and interpretation is included.
- Standard Committee
- PE/TR - Transformers
- Status
- Inactive-Withdrawn Standard
- Superseded by
- C57.104-2008
- Superseding
- C57.104-1978
- Board Approval
- 1991-06-27
- History
-
- Withdrawn:
- 2006-02-06
- ANSI Approved:
- 1991-11-20
- Published:
- 1992-07-22
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.104 - Insulating Fluids - DGA Guide Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Ed TeNyenhuis
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.104
Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers
This guide applies to in-service mineral oil-immersed transformers and addresses: a) The theory of gas generation in a transformer b) The interpretation of dissolved gas analysis c) Suggested operating procedures d) Various diagnostic techniques e) Case studies and examples f) Evaluation criteria and guidelines g) A bibliography of related literature
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.104-2019
IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers
Detailed procedures for interpreting Dissolved Gas Analysis results are described in this guide. The document details: 1) Overview of gas generation in transformer and DGA process; 2) The purpose and application of DGA; 3) DGA quality verification and DGA limitations; 4) DGA interpretation and norms; 5) Fault type definitions and identification; 6) Case studies and interpretation example. The intent is to provide the operator with useful information concerning the serviceability of the equipment. An extensive bibliography on gas evolution, detection, and interpretation is included.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.104-1978
IEEE Guide for the Detection and Determination of Generated Gases in Oil-Immersed Transformers and Their Relation to the Serviceability of the Equipment
Superseded. Detailed procedures for analyzing gas from gas spaces or gas-collecting devices as well as gas dissolved in oil are described. The procedures cover: (1) the calibration and use of field instruments for detecting and estimating the amount of combustible gases present in gas blankets above oil, or in gas detector relays; (2) the use of fixed instruments for detecting and determining the quantity of combustible gases present in gas-blanketed equipment; (3) obtaining samples of gas and oil from the transformer for laboratory analysis; (4) laboratory methods for analyzing the gas blanket and the gases extracted from the oil; and (5) interpreting the results in terms of transformer serviceability. The intent is to provide the operator with positive and useful information concerning the serviceability of the equipment. An extensive bibliography on gas evolution, detection, and interpretation is included.
C57.104-2008
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
Detailed procedures for analyzing gas from gas spaces or gas-collecting devices as well as gas dissolved in oil are described. The procedures cover: 1) the calibration and use of field instruments for detecting and estimating the amount of combustible gases present in gas blankets above oil, or in gas detector relays; 2) the use of fixed instruments for detecting and determining the quantity of combustible gases present in gas-blanketed equipment; 3) obtaining samples of gas and oil from the transformer for laboratory analysis; 4) laboratory methods for analyzing the gas blanket and the gases extracted from the oil; and 5) interpreting the results in terms of transformer serviceability. The intent is to provide the operator with useful information concerning the serviceability of the equipment. An extensive bibliography on gas evolution, detection, and interpretation is included.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards