Inactive-Reserved Standard

IEEE C135.62-2009

IEEE Standard for Zinc-Coated Forged Anchor Shackles

Dimensions and strength requirements for anchor shackles used in overhead transmission and distribution line hardware are covered in this standard.

Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution
Status
Inactive-Reserved Standard
PAR Approval
2009-01-30
Board Approval
2009-09-11
History
ANSI Approved:
2010-01-22
Published:
2009-12-11
Inactivated Date:
2021-03-25

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution
Working Group
TPC-15.11.08-10 - Overhead Line Structural and Materials & Hardware Working Group
IEEE Program Manager
Michael Kipness
Contact Michael Kipness
Working Group Chair
Jennifer Havel

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P751

Guide for Wood Structures Used for Overhead Electric Transmission Lines

This guide consolidates useful information, methods, and reference materials that define the state of the art in the design of wood pole transmission structures, commonly in the 69 kV through 345 kV range, into one document. This guide addresses application of wood in transmission structures, characteristics of wood, methods of analysis, loadings, connections, non-wood members, erection and framing, quality assurance, electrical considerations, testing and maintenance.

Learn More About P751

PC135.100

Standard for Line Hardware for Overhead Line Construction

This standard covers the requirements of line hardware used in overhead lines, including clevis and eye fittings, Y-clevis fittings, socket fittings, ball fittings, chain links, shackles, triangular and rectangular yoke plates, suspension clamps, strain clamps, straight-line deadend clamps, and shoulder live line extension links.

Learn More About PC135.100

PC135.62

Standard for Zinc-Coated Forged Anchor Shackles

This standard covers dimensions and strength requirements for anchor shackles used in overhead transmission and distribution line hardware.

Learn More About PC135.62

PC135.90

Standard for Pole Line Hardware for Overhead Line Construction

This standard covers the requirements of inch-based hardware commonly used in wood pole overhead line construction. Metric hardware is not covered by this standard.

Learn More About PC135.90

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


C135.80-2023

IEEE Approved Draft Standard for Fasteners for Overhead Line Construction

The requirements of inch-based: (1) zinc-coated ferrous carriage bolts, machine bolts, double-arming bolts, double-end bolts, washer-head bolts, eye bolts, eye nuts, and washer nuts; (2) zinc-coated ferrous lag screws of the fetter drive, gimlet point, and twist drive type; (3) washers; and (4) staples, commonly used in overhead line construction, are covered. Metric bolts, nuts, and lag screws are not covered by this standard.

Learn More About C135.80-2023

C135.90-2014

IEEE Standard for Pole Line Hardware for Overhead Line Construction

This standard covers the requirements of inch-based wood pole line hardware commonly used in overhead line construction. Metric pole line hardware is not covered by this standard.

Learn More About C135.90-2014

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


C135.2-1999

IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction

Requirements for threaded zinc-coated ferrous strand-eye anchor rods and nuts commonly used in overhead line construction are covered in this standard.

Learn More About C135.2-1999

C135.3-2001

IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction

Zinc-coated steel lag screws of the fetter drive, gimlet point, and twist drive types commonly used in overhead line construction are covered in this standard.

Learn More About C135.3-2001

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


C135.20-1998

IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction

Zinc-coated ferrous clevises for spool-type insulators commonly used for supporting or dead-ending conductors in line construction are covered. The specifications for spool-type insulators used with these clevises are covered in ANSI C29.3-1986.

Learn More About C135.20-1998

C135.61-1997

IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware

Requirements for mechanically testing load-rated line hardware for use on transmission and distribution facilities are described. Items specifically addressed in this standard include clevis and eye fittings, Y-clevis fittings, socket fittings, ball fittings, chain links, shackles, triangular and rectangular yoke plates, suspension clamps, and strain clamps. This standard is intended to cover routine acceptance testing. It is not intended for initial design tests.

Learn More About C135.61-1997

C135.63-1998

IEEE Standard for Shoulder Live Line Extension Links for Overhead Line Construction

Dimensions and strength requirements for shoulder live line extension links used in overhead transmission and distribution hardware are covered.

Learn More About C135.63-1998

C135.64-2012

IEEE Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps

Test procedures for the slip and pullout strength certification testing of bolted dead end strain clamps for use on overhead transmission and distribution lines are covered by this guide.

Learn More About C135.64-2012

C135.80-2012

IEEE Standard for Fasteners for Overhead Line Construction

The requirements of inch-based: (1) zinc-coated ferrous carriage bolts, machine bolts, double-arming bolts, double-end bolts, washer-head bolts, eye bolts, eye nuts, and washer nuts; (2) zinc-coated ferrous lag screws of the fetter drive, gimlet point, and twist drive type; (3) washers; and (4) staples, commonly used in overhead line construction, are covered. Metric bolts, nuts, and lag screws are not covered by this standard.

Learn More About C135.80-2012

C135.80-2012/Cor 1-2020

IEEE Standard for Fasteners for Overhead Line Construction - Corrigendum 1: Table 5 Corrections

Dimension errors in Table 5 for hex nuts have been corrected

Learn More About C135.80-2012/Cor 1-2020

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.