The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and multiple modulation formats to support scalable data rates is defined in this standard. The Medium Access Control (MAC) sublayer protocol supports both isochronous and asynchronous data types
- Standard Committee
- C/LAN/MAN - LAN/MAN Standards Committee
- Status
- Superseded Standard
- PAR Approval
- 2000-03-30
- Superseded by
- 802.15.3-2016
- Amendments
-
802.15.3b-2005
802.15.3c-2009
802.15.3d-2017
802.15.3e-2017
- Board Approval
- 2003-06-12
- History
-
- ANSI Approved:
- 2003-10-20
- Published:
- 2003-09-29
- Reaffirmed:
- 2008-11-10
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/LAN/MAN - LAN/MAN Standards Committee
- Working Group
-
802.15 WG - Wireless Specialty Networks (WSN) Working Group
- IEEE Program Manager
- Christy Bahn
Contact Christy Bahn - Working Group Chair
- Clinton Powell
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P802.15.14
Standard for Impulse Radio Ultra Wideband Wireless Ad Hoc Networks
This standard specifies the physical layer (PHY) and media access control sublayer (MAC) for impulse radio ultra wideband (UWB) wireless ad hoc connectivity with fixed, portable, and moving devices with limited energy consumption requirements, and supports real time precision ranging capability that is accurate to within a few centimeters. PHYs are defined for devices operating in a variety of regulatory domains.
P802.15.15
Standard for Wireless Ad Hoc Networks
This standard specifies the physical layer (PHY) and medium access control (MAC) sublayer for wireless ad hoc network connectivity with fixed, portable, and moving devices with very low energy consumption requirements. PHYs are defined for devices operating in a variety of regulatory domains.
P802.15.4
IEEE Draft Standard for Low-Rate Wireless Networks
The physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements are defined in this standard. In addition, the standard provides modes that allow for precision ranging. PHYs are defined for devices operating in a variety of geographic regions.
P802.15.4ab
IEEE Draft Standard for Low-Rate Wireless Network Amendment 1: Enhanced Ultra Wide-Band (UWB) Physical Layers (PHYs) and Associated Medium Access and Control (MAC) sublayer Enhancements
This amendment enhances the Ultra Wideband (UWB) physical layers (PHYs) medium access control (MAC), and associated ranging techniques while retaining backward compatibility with enhanced ranging capable devices (ERDEVs). Areas of enhancement include: additional coding, preamble and modulation schemes to additional coding, preamble and modulation schemes to support improved link budget and/or reduced air-time relative to IEEE Std 802.15.4 UWB; additional channels and operating frequencies; interference mitigation techniques to support greater device density and higher traffic use cases relative to the IEEE Std 802.15.4 UWB; improvements to accuracy, precision and reliability and interoperability for high-integrity ranging; schemes to reduce complexity and power consumption; definitions for tightly coupled hybrid operation with narrowband signaling to assist UWB; enhanced native discovery and connection setup mechanisms; sensing capabilities to support presence detection and environment mapping; and mechanisms supporting low-power low-latency streaming as well as high data-rate streaming allowing at least 50 Mb/s of throughput. Support for peer-to-peer, peer-to-multi-peer, and station-to-infrastructure protocols are in scope, as are infrastructure synchronization mechanisms. This amendment includes safeguards so that the high throughput data use cases do not cause significant disruption to low duty-cycle ranging use cases.
P802.15.4ac
Standard for Low-Rate Wireless Networks Amendment: Privacy Enhancements
This amendment specifies modifications to the IEEE Std 802.15.4 medium access control (MAC) specification to specify mechanisms that address and improve user privacy. These mechanisms include randomized addresses, and exchanges that support session continuity. This amendment maintains backward compatibility with the base standard.
P802.15.4ad
IEEE Standard for Low-Rate Wireless Networks Amendment: Data rate and range extensions for the Smart Utility Network (SUN) Physical layer (PHY)
This amendment defines new data rate extensions by increasing the occupied bandwidth, adding new modulation and coding schemes (MCSs), and extending the SUN PHYs to provide long-range communication in congested environments. Additionally, this amendment defines at least one mode of the SUN-Orthogonal Frequency Division Multiplexing (OFDM) PHY that exceeds a sensitivity of -120 dBm at a 1 % packet error rate (PER) with a 64 B payload, intended for the Federal Communications Commission (FCC) 15.247 digital modulation system. At least one of the new MCSs achieves a data rate greater than 2.4 Mb/s. The amendment defines the MAC modifications required to support the amended PHYs. The amendment also defines frequency bands based on updated regional regulations.
P802.15.6
Standard for Local and metropolitan area networks - Part 15.6: Wireless Body Area Networks
The standard defines short-range, wireless communication in the vicinity of, or inside, an environment such as a human body, vehicle body or both, using the Ultra-Wideband (UWB) and narrow-band physical layer (PHY) and medium access control (MAC) to support enhanced dependability in human body area networks (HBAN) in the industrial scientific medical (ISM) bands and local medical regulations. The standard supports quality of service (QoS) and data rates up to 50 Mb/s and incorporates support for vehicle body area networks (VBAN). The standard specifies the coexistence of multiple piconets, including inter-body area network (inter-BAN) interference and inter-piconets interference, simple MAC protocol, and sensing and feedback control loop delay.
P802.15.7a
IEEE Draft Standard for Local and Metropolitan Area Networks - Part 15.7: Short-Range Optical Wireless Communications Amendment 1: Higher Speed, Longer Range Optical Camera Communication (OCC)
The existing OCC physical layer of IEEE 802.15.7-2018 is amended with one PHY specification for higher rate and longer range. Also, the AI algorithms and MIMO technique were proposed to increase the system performance
P802.16t
Standard for Air Interface for Broadband Wireless Access Systems Amendment - Fixed and Mobile Wireless Access in Narrowband Channels
This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile point-to-multipoint broadband wireless access (BWA) systems providing multiple services. The MAC is structured to support multiple PHY specifications, including WirelessMAN-SC, WirelessMAN-OFDM, and WirelessMAN-OFDMA PHY specifications, each suited to a particular operational environment.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
802.15.10-2017
IEEE Recommended Practice for Routing Packets in IEEE 802.15.4 Dynamically Changing Wireless Networks
The routing of packets in dynamically changing wireless networks is facilitated in this recommended practice. The result is an extension of the area of coverage as the number of nodes increase. (The PDF of this standard is available at no cost compliments of the IEEE GET program http://ieeexplore.ieee.org/browse/standards/get-program/page/)
802.15.10a-2019
IEEE Recommended Practice for Routing Packets in IEEE 802.15.4(TM) Dynamically Changing Wireless Networks - Amendment 1: Fully Defined Use of Addressing and Route Information Currently in IEEE Std 802.15.10
This amendment to IEEE Std 802.15.10 fully defines how the addressing and route information (already defined in the recommended practice) are to be used by the routing modes (also currently defined in the recommended practice), including at least the following: end-to-end (E2E) acknowledgment from mesh route in non-storing mode; peer-to-peer (P2P) routing using a combination of up/down routing in non-storing mode; on-demand P2P routing for E2E acknowledgment in non-storing mode; on-demand path storing when sending unicast in non-storing mode.
802.15.13-2023
IEEE Standard for Multi-Gigabit per Second Optical Wireless Communications (OWC), with Ranges up to 200 m, for Both Stationary and Mobile Devices
The protocol and compatible network equipment for optical wireless communications and its operation as an optical wireless personal area network (OWPAN), supporting data rates of multiple Gbit/s for wireless specialty applications, are defined in this standard. A medium access control (MAC) sublayer, supporting scheduled and polled medium access, as well as two physical layers (PHYs), enabling low complexity, low power, and high throughput are included. (The PDF of this standard is available at cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68.)
802.15.22.3-2020
IEEE Standard for Spectrum Characterization and Occupancy Sensing
The architecture, abstraction layers, interfaces, and metadata requirements for spectrum characterization and occupancy sensing (SCOS) systems are specified in this standard. This standard also defines performance parameters, units, and measures. This SCOS system comprises one or more semi-autonomous spectrum sensors, which scan electromagnetic spectrum, digitize it, and perform processing, transmitting the resultant data with appropriate metadata to a central storage and processing system. (The PDF of this standard is available at no charge compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.15.3-2023
IEEE Standard for Wireless Multimedia Networks
The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz, 60 GHz, and 300 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low-power and multiple modulation formats to support scalable data rates are defined in this standard. The Medium Access Control (MAC) sublayer protocol supports both isochronous and asynchronous data types.
802.15.4-2020
IEEE Standard for Low-Rate Wireless Networks
The physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements are defined in this standard. In addition, the standard provides modes that allow for precision ranging. PHYs are defined for devices operating in a variety of geographic regions. (The PDF of the standard is available at no cost at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68 compliments of the IEEE GET program)
802.15.4-2020/Cor 1-2022
IEEE Standard for Low-Rate Wireless Networks Corrigendum 1: Correction of Errors Preventing Backward Compatibility
Errors, inconsistencies, and ambiguities in IEEE Std 802.15.4-2020 and its amendments are corrected in this corrigendum. (The PDF of this standard is available at no cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.15.4aa-2022
IEEE Standard for Low-Rate Wireless Networks Amendment 4: Higher Data Rate Extension to IEEE 802.15.4 Smart Utility Network (SUN) Frequency Shift Keying (FSK) Physical Layer (PHY)
This amendment defines a data rate extension of SUN FSK PHY to IEEE Std 802.15.4-2020. It adds data rate extensions for the SUN FSK modulation and channel parameters. These extensions focus on the Japanese frequency band. (The PDF of this standard is available at no cost via the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.15.4w-2020
IEEE Standard for Low-Rate Wireless Networks--Amendment 2: Low Power Wide Area Network (LPWAN) Extension to the Low-Energy Critical Infrastructure Monitoring (LECIM) Physical Layer (PHY)
The existing low-energy critical infrastructure monitoring (LECIM) frequency shift keying (FSK) physical layer of IEEE Std 802.15.4-2020 is extended to be more robust in the presence of interference and achieve higher link budgets for applications in low power wide area networks (LPWAN). Lower symbol rates and a split mode with low-rate forward error correction (FEC) codes are introduced to achieve this goal.
802.15.4y-2021
IEEE Standard for Low-Rate Wireless Networks Amendment 3: Advanced Encryption Standard (AES)-256 Encryption and Security Extensions
This amendment defines security extensions to IEEE Std 802.15.4 adding AES-256-CCM plus a cipher suite/authentication method registry and a process for inclusion of additional algorithms. The registry defines a capability to align IEEE Std 802.15.4 with the security requirements of higher layer standards. (The PDF of this standard is available at no cost to you through the IEEE GET Program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.15.4z-2020
IEEE Standard for Low-Rate Wireless Networks--Amendment 1: Enhanced Ultra Wideband (UWB) Physical Layers (PHYs) and Associated Ranging Techniques
This amendment enhances the UWB PHYs with additional coding options and improvements to increase the integrity and accuracy of ranging measurements. It also enhances the MAC to support control of time-of-flight ranging procedures and exchange ranging related information between the participating ranging devices. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.15.7-2018
IEEE Standard for Local and metropolitan area networks--Part 15.7: Short-Range Optical Wireless Communications
A physical layer (PHY) and medium access control (MAC) sublayer for short-range optical wireless communications (OWC) in optically transparent media using light wavelengths from 10 000 nm to 190 nm are defined. The standard is capable of delivering data rates sufficient to support audio and video multimedia services and also considers mobility of the optical link, compatibility with various light infrastructures, impairments due to noise and interference from sources like ambient light, and a MAC sublayer that accommodates the unique needs of visible links as well as the other targeted light wavelengths. It also accommodates optical communications for cameras where transmitting devices incorporate light-emitting sources and receivers are digital cameras with a lens and image sensor. The standard adheres to applicable eye safety regulations. (The PDF of this standard is available at no cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68.)
802.15.8-2017
IEEE Standard for Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Peer Aware Communications (PAC)
Physical layer (PHY) and medium access control (MAC) mechanisms are defined in this standard for wireless personal area networks (WPANs) peer aware communications (PAC) optimized for peer-to-peer and infrastructure-less communications with fully distributed coordination. PAC features include discovery for peer information without association, discovery signaling rate typically greater than 100 kb/s, discovery of the number of devices in the network, scalable data transmission rates typically up to 10 Mb/s, group communications with simultaneous membership in multiple groups typically up to 10, relative positioning, security, and operation in selected globally available unlicensed/licensed bands below 11 GHz capable of supporting these requirements. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/servlet/opac?punumber=8287782)
802.15.9-2021
IEEE Standard for Transport of Key Management Protocol (KMP) Datagrams
A message exchange framework based on information elements as a transport method for key management protocol (KMP) datagrams and guidelines for the use of some existing KMPs with IEEE Std 802.15.4(TM) is defined in this standard. A new KMP is not created in this standard. In support of KMP transmission and reception, a generic multiplexed data service layer that can be used to transmit large packets from the upper KMP to another peer and that provides for protocol discrimination is also provided in this standard. The multiplexed data service provides a fragmentation and multiplexing layer for those packets so they can be delivered over smaller MAC layer frames and multiplexed on the recipient end to the right processing service. The multiplexing provides for EtherType protocol discrimination. (The PDF of this standard is available at no cost compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)
8802-15-3-2017
ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 15-3: High data rate wireless multi-media networks
The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz and 60 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and multiple modulation formats to support scalable data rates is defined in this standard. The Medium Access Control (MAC) sublayer protocol supports both isochronous and asynchronous data types.
8802-15-4-2024
IEEE/ISO/IEC International Standard -- Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
The physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements are defined in this standard. In addition, the standard provides modes that allow for precision ranging. PHYs are defined for devices operating in a variety of geographic regions.
8802-15-6-2017
ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 15-6: Wireless body area network
Short-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It uses existing industrial scientific medical (ISM) bands as well as frequency bands approved by national medical and/or regulatory authorities. Support for quality of service (QoS), extremely low power, and data rates up to 10 Mbps is required while simultaneously complying with strict non-interference guidelines where needed. This standard considers effects on portable antennas due to the presence of a person (varying with male, female, skinny, heavy, etc.), radiation pattern shaping to minimize the specific absorption rate (SAR) into the body, and changes in characteristics as a result of the user motions.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
802.15.3-2016
IEEE Standard for High Data Rate Wireless Multi-Media Networks
The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz and 60 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and multiple modulation formats to support scalable data rates is defined in this standard. The Medium Access Control (MAC) sublayer protocol supports both isochronous and asynchronous data types. (The PDF of this standard is available at no cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page)
802.15.3b-2005
IEEE Standard for IEEE Amendment to Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN): Amendment to MAC Sublayer
This amendment provides corrections and optimizations to IEEE Std 802.15.3-2003. The management service access points (SAPs) have been completely updated to create a consistent, logical interface. As a consequence, most of the message sequence charts (MSCs) in the medium access control (MAC) functional specification have been updated as well. Channel time usage is more efficient with the addition of multiple contention periods, releasing channel time, implied acknowledgment, and multicast groups. (The PDF of this standard is available at no cost.
802.15.3c-2009
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Amendment 2: Millimeter-wave-based Alternative Physical Layer Extension
This amendment defines and alternative physical layer (PHY) for IEEE Std 802.15.3-2003. Three PHY modes have been defined that enable data rates in excess of 5 Gb/s using the 60 GHz band. A beam forming protocol has been defined to improve the range of communicating devices. Aggregation and block acknowledgment have been defined to improve the medium access control (MAC) efficiency at the high data rates provided for by the PHY.
802.15.3d-2017
IEEE Standard for High Data Rate Wireless Multi-Media Networks Amendment 2: 100 Gb/s Wireless Switched Point-to-Point Physical Layer
An alternative physical layer (PHY) at the lower THz frequency range between 252 GHz and 325 GHz for switched point-to-point links is defined in this amendment. Two PHY modes are defined that enable data rates of up to 100 Gb/s using eight different bandwidths between 2.16 GHz and 69.12 GHz. (The PDF of this standard is available at no cost to you thru the IEEE GET program http://ieeexplore.ieee.org/servlet/opac?punumber=8066474)
802.15.3e-2017
IEEE Standard for High Data Rate Wireless Multi-Media Networks--Amendment 1: High-Rate Close Proximity Point-to-Point Communications
An alternative physical layer (PHY) and a modified medium access control (MAC) layer is defined in this amendment. Two PHY modes have been defined that enable data rates up to 100 Gb/s using the 60 GHz band. MIMO and aggregation methods have been defined to increase the maximum achievable communication speeds. Stack acknowledgment has been defined to improve the medium access control (MAC) efficiency when used in a point-to-point (P2P) topology between two devices. (The PDF of this standard is available at no cost compliments of the IEEE GET program http://ieeexplore.ieee.org/browse/standards/get-program/page/)
802.15.3f-2017
IEEE Standard for High Data Rate Wireless Multi-Media Networks Amendment 3: Extending the Physical Layer (PHY) Specification for Millimeter Wave to Operate from 57.0 GHz to 71 GHz
Extend the RF channelization of the millimeter wave PHY to allow for use of the spectrum up to 71 GHz.
802.15.4-2003
IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN)
Superseded by IEEE Std 802.15.4-2006 IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low- data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN). This revision extends the market applicability of IEEE Std 802.15.4, removes ambiguities in the standard, and makes improvements revealed by implementations of IEEE Std 802.15.4-2003.
802.15.4-2006
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs)
IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN). This revision extends the market applicability of IEEE Std 802.15.4, removes ambiguities in the standard, and makes improvements revealed by implementations of IEEE Std 802.15.4-2003.
802.15.4-2011
IEEE Standard for Local and metropolitan area networks--Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)
The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN) were defined in IEEE Std 802.15.4-2006. In this revision, the market applicability of IEEE Std 802.15.4 is extended, the ambiguities in the standard are removed, and the improvements learned from implementations of IEEE Std 802.15.4-2006 are included.
802.15.4-2015
IEEE Standard for Low-Rate Wireless Networks
The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN) are defined in this standard. A variety of physical layers (PHYs) have been defined that cover a wide variety of frequency bands.
802.15.4-2015/Cor 1-2018
IEEE Standard for Low-Rate Wireless Networks Corrigendum 1
Errors, inconsistencies, and ambiguities in IEEE Std 802.15.4-2015 are corrected in this corrigendum.
802.15.4a-2007
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHYs
This standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity, short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN).
802.15.4c-2009
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Amendment 2: Alternative Physical Layer Extension to support one or more of the Chinese 314-316 MHz, 430-434 MHz, and 779-787 MHz bands
This amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations, Radio Management of P. R. of China doc. # 6326360786867187500 or current document, for one or more of the 314-316 MHz, 430-434 MHz, and 779-787 MHz frequency bands.
802.15.4d-2009
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Amendment 3: Alternative Physical Layer Extension to support the Japanese 950 MHz bands
This amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency allocation (950 MHz) in Japan. The amendment shall completely follow the new technical conditions described in Japanese ministerial ordinance. The amendment shall coexist with passive tag systems in the band.
802.15.4e-2012
IEEE Standard for Local and metropolitan area networks--Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayer
IEEE Std 802.15.4-2011 is amended by this standard. The intention of this amendment is to enhance and add functionality to the IEEE 802.15.4 MAC to (a) better support the industrial markets and (b) permit compatibility with modifications being proposed within the Chinese WPAN.
802.15.4f-2012
IEEE Standard for Local and metropolitan area networks-- Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY)
This amendment provides two PHYs (MSK and LRP UWB) that can be used in a wide range of applications requiring various combinations of low cost, low energy consumption, multiyear battery life, reliable communications, precision location, and reader options. This PHY standard supports the performance and flexibility needed for future mass deployments of highly populated autonomous active RFID systems anywhere in the world.
802.15.4g-2012
IEEE Standard for Local and metropolitan area networks--Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility Networks
In this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate PHYs are defined as well as only those MAC modifications needed to support their implementation.
802.15.4j-2013
IEEE Standard for Local and metropolitan area networks - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 4: Alternative Physical Layer Extension to Support Medical Body Area Network (MBAN) Services Operating in the 2360 MHz - 2400 MHz Band
In this amendment to IEEE Std 802.15.4TM-2011, a physical layer for IEEE 802.15.4 in the 2360 MHz to 2400 MHz band which complies with Federal Communications Commission (FCC) MBAN rules is defined. Modifications to the MAC needed to support this new physical layer are also defined in this amendment.
802.15.4k-2013
IEEE Standard for Local and metropolitan area networks– Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)–Amendment 5: Physical Layer Specifications for Low Energy, Critical Infrastructure Monitoring Networks.
Two PHYs (DSSS and FSK) that support critical infrastructure monitoring applications are provided in this amendment to IEEE Std 802.15.4TM-2011. In addition, only those MAC modifications needed to support the implementation of the two PHYs are described in this amendment.
802.15.4m-2014
IEEE Standard for Local and metropolitan area networks - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - Amendment 6: TV White Space Between 54 MHz and 862 MHz Physical Layer
In this amendment to IEEE Std 802.15.4(TM)-2011, outdoor low-data-rate, wireless, television white space (TVWS) network requirements are addressed. Alternate physical layers (PHYs) are defined as well as only the medium access control (MAC) modifications needed to support their implementation.
802.15.4n-2016
IEEE Standard for Low-Rate Wireless Networks -- Amendment 1: Physical Layer Utilizing China Medical Bands
The Ministry of Industry and Information Technology (MIIT) of the People's Republic of China has approved the 174--216 MHz, 407--425 MHz, and 608--630 MHz bands for medical information transmission. China medical band (CMB) devices operating within these bands conform to a set of rules specified in MIIT Doc 423-2005, which restricts use of the band to only medical, non-voice use under direction of a healthcare practitioner, among other requirements. A physical layer (PHY) for devices operating on Chinese approved bands for medical signals is defined in this amendment.
802.15.4p-2014
IEEE Standard for local and metropolitan area networks - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - Amendment 7: Physical Layer for Rail Communications and Control (RCC)
This amendment to IEEE Std 802.15.4(TM)-2011 specifies a PHY for use in equipment intended to address rail transportation industry needs and to meet US positive train control (PTC) regulatory requirements and similar regulatory requirements in other parts of the world. In addition, the amendment describes only those MAC changes needed to support this PHY.
802.15.4q-2016
IEEE Standard for Low-Rate Wireless Networks --Amendment 2: Ultra-Low Power Physical Layer
Two alternate physical layers (PHYs), TASK and RS-GFSK, are specified in this amendment in addition to the PHYs of IEEE Std 802.15.4-2015. The amendment also defines the medium access control (MAC) modifications needed to support the implementation of the TASK and RS-GFSK PHYs. These alternate PHYs enable low-cost, ultra-low power consumption, as well as extended battery life, in various frequency bands and geographical regions under multiple regulatory domains.
802.15.4s-2018
IEEE Standard for Low-Rate Wireless Networks Amendment 6: Enabling Spectrum Resource Measurement Capability
Definitions of MAC related functions to enable spectrum resource management are addressed in this amendment to IEEE Std 802.15.4. It specifies the following: – Spectrum resource measurements and network performance metrics, such as packet error ratio, delay, etc. – Information elements and data structures to capture these measurements, – Procedures for collecting and exchanging spectrum resource measurement information with higher layers or other devices.
802.15.4t-2017
IEEE Standard for Low-Rate Wireless Networks--Amendment 4: Higher Rate (2 Mb/s) Physical (PHY) Layer
This amendment defines a physical layer for IEEE Std 802.15.4(TM)-2015, capable of supporting 2 Mb/s data rates, utilizing the 2400-2483.5 MHz band, having backwards-compatibility to, and the same occupied bandwidth as, the present 2450 MHz O-QPSK physical layer, and capable of simple implementation. Target range should be at least 10 meters. This amendment defines modifications to the medium access control (MAC) sublayer needed to support this new physical layer.
802.15.4u-2016
IEEE Standard for Low-Rate Wireless Networks--Amendment 3: Use of the 865 MHz to 867 MHz Band in India
A physical (PHY) layer enabling the use of the 865 MHz to 867 MHz band in India is defined in this amendment. The supported data rate should be at least 40 kb/s and the typical line-of-sight range should be on the order of 5 km using an omni directional antenna. Included are any channel access and/or timing changes in the medium access control necessary to support this PHY layer.
802.15.4v-2017
IEEE Standard for Low-Rate Wireless Networks - Amendment 5: Enabling/Updating the Use of Regional Sub-GHz Bands
The smart utility network (SUN) physical layers (PHYs) in IEEE Std 802.15.4(TM)-2015 are changed by this amendment to enable the use of the 870--876 MHz and 915--921 MHz bands in Europe, the 902--928 MHz band in Mexico, the 902--907.5 MHz and 915--928 MHz bands in Brazil, and the 915--928 MHz band in Australia and New Zealand. Additional Asian regional frequency bands are also specified in this amendment. Furthermore, the amendment changes the channel parameters listed for the SUN PHYs, the low energy critical infrastructure monitoring (LECIM) PHY, and the television white space (TVWS) PHY for the 470-510 MHz band in China and the 863--870 MHz band in Europe and aligns these channel parameters with regional requirements. The amendment includes channel access and/or timing changes to the medium access control (MAC) necessary for conformance to regional requirements for these bands.
802.15.4x-2019
IEEE Standard for Low-Rate Wireless Networks - Amendment 7: Defining Enhancements to the Smart Utility Network (SUN) Physical Layers (PHYs) Supporting up to 2.4 Mb/s Data Rates
Enhancements to the IEEE 802.15.4(TM) smart utility network (SUN) orthogonal frequency division multiplexing (OFDM) physical layers (PHYs) that enable support for data rates up to 2.4 Mb/s are defined by this amendment to IEEE Std 802.15.4(TM)-2015. This amendment also defines additional channel plans, as needed, to support emerging applications.
802.15.7-2011
IEEE Standard for Local and Metropolitan Area Networks--Part 15.7: Short-Range Wireless Optical Communication Using Visible Light
A PHY and a MAC layer for short-range optical wireless communications using visible light in optically transparent media are defined. The visible light spectrum extends from 380 nm to 780 nm in wavelength. The standard is capable of delivering data rates sufficient to support audio and video multimedia services and also considers mobility of the visible link, compatibility with visible-light infrastructures, impairments due to noise and interference from sources like ambient light and a MAC layer that accommodates visible links. The standard adheres to applicable eye safety regulations.
802.15.9-2016
IEEE Recommended Practice for Transport of Key Management Protocol (KMP) Datagrams
A message exchange framework based on information elements as a transport method for key management protocol (KMP) datagrams and guidelines for the use of some existing KMPs with IEEE Std 802.15.4 are defined in the recommended practice. A new KMP is not created in this recommended practice. In support of KMP transmission and reception, a generic multiplexed data service layer that can be used to transmit large packets from the upper KMP to another peer is also provided in this recommended practice. The multiplexed data service provides a fragmentation and multiplexing layer for those packets so they can be delivered over smaller MAC layer frames and multiplexed on the recipient end to the right processing service. (The PDF of this standard is available at no cost compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
802.15.1-2005
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.1a: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Wireless Personal Area Networks (WPAN)
Methods for communicating devices in a Personal Area Network.
802.15.2-2003
IEEE Recommended Practice for Information technology -- Local and metropolitan area networks-- Specific requirements -- Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless Devices Operating in Unlicensed Frequency Bands
This recommended practice addresses the issue of coexistence of wireless local area networks and wireless personal area networks. These wireless networks often operate in the same unlicensed band. This recommended practice describes coexistence mechanisms that can be used to facilitate coexistence of wireless local area networks (i.e., IEEE Std 802.11b-1999) and wireless personal area networks (i.e., IEEE Std 802.15.1-2002).
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
802.15.5-2009
IEEE Recommended Practice for Information technology-- Telecommunications and information exchange between systems-- Local and metropolitan area networks-- Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs)
The scope is to provide a recommended practice to provide the architectural framework enabling WPAN devices to promote interoperable, stable, and scalable wireless mesh topologies and, if needed, to provide the amendment text to the current WPAN standards that is required to implement this recommended practice.
802.15.6-2012
IEEE Standard for Local and metropolitan area networks - Part 15.6: Wireless Body Area Networks
Short-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It uses existing industrial scientific medical (ISM) bands as well as frequency bands approved by national medical and/or regulatory authorities. Support for quality of service (QoS), extremely low power, and data rates up to 10 Mbps is required while simultaneously complying with strict non-interference guidelines where needed. This standard considers effects on portable antennas due to the presence of a person (varying with male, female, skinny, heavy, etc.), radiation pattern shaping to minimize the specific absorption rate (SAR) into the body, and changes in characteristics as a result of the user motions. (The PDF of this standard is available at no cost at https://ieeexplore.ieee.org/browse/standards/get-program/page compliments of the IEEE GET program.