Direct-current (dc) charging is a method of charging that facilitates rapid energy transfer from the electric grid to plug-in vehicles. This method of charging allows significantly more current to be drawn by the vehicle versus lower rated alternating-current (ac) systems. A combination of vehicles that can accept high-current dc charge and the dc supply equipment that provides it has led to the use of terminology such as "fast charging," "fast charger," "dc charger," "quick charger," etc. DC charging and ac charging vary by the location at which ac current is converted to dc current. For typical dc charging, the current is converted at the off-board charger, which is separate from the vehicle. For ac charging, the current is converted inside the vehicle, by means of an on-board charger. The location of the ac to dc conversion equipment, or converter, shapes the complexity of the equipment design. Regarding ac charging, as previously mentioned, the conversion is on board the vehicle. This allows the original equipment maker (OEM) designed systems to control the charging operation in its entirety. The on-board charger (converter) and battery controller solution is under direct control of the vehicle manufacturer. For dc charging, an entirely new challenge exists for OEMs. The dc charger is now external to the vehicle and requires the vehicle engineers to control an external power device. For the reason of necessary interoperability, standards such as IEEE Std 2030.1.1 are provided to assist developers.
- Sponsor Committee
- VT/ITS - Intelligent Transportation Systems
Learn More About VT/ITS - Intelligent Transportation Systems - Status
- Active Standard
- PAR Approval
- 2017-09-28
- Superseding
- 2030.1.1-2015
- Board Approval
- 2021-11-09
- History
-
- Published:
- 2022-02-18
Working Group Details
- Society
- IEEE Vehicular Technology Society
Learn More About IEEE Vehicular Technology Society - Sponsor Committee
- VT/ITS - Intelligent Transportation Systems
Learn More About VT/ITS - Intelligent Transportation Systems - Working Group
-
WG-P2030.1.1 - Working group for creating technical specifications of quick charger for electric vehicles
- IEEE Program Manager
- Soo Kim
Contact Soo Kim - Working Group Chair
- Alexandre Beaudet
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards