This guide covers general recommendations for the loading of dry-type distribution and power transformers installed in ventilated, non-ventilated, and sealed type enclosures.
- Standard Committee
- PE/TR - Transformers
- Status
- Active PAR
- PAR Approval
- 2021-02-10
- Superseding
- C57.96-2013
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.96 - Dry Type Transformers - Dry Type Loading Guide Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Aniruddha Narawane
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.96-1999
IEEE Guide for Loading Dry-Type Distribution and Power Transformers
Reaffirmed 2004. General recommendations for the loading of dry-type distribution and power transformers that have 80 u00b0C, 115 u00b0C, and 150 u00b0C average winding rises and insulation systems limited to 150 u00b0C, 180 u00b0C, and 220 u00b0C maximum hottest-spot operating temperatures, respectively, are covered in this guide. Recommendations for ventilated, nonventilated, and sealed dry-type transformers having impregnated insulation systems are included.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C57.96-2013
IEEE Guide for Loading Dry-Type Distribution and Power Transformers
General recommendations for the loading of dry-type distribution and power transformers installed in ventilated, non-ventilated, and sealed type enclosures are included in this standard.