This standard applies to outdoor and indoor power apparatus dc bushings of condenser type that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air dc bushings. This standard defines the special terms used, service conditions, rating, general requirements, electrical insulation characteristics, and test procedure for the bushings for dc application.
- Standard Committee
- PE/TR - Transformers
- Status
- Superseded Standard
- Corrigendum
-
C57.19.03-1996/Cor 1-2005
- Board Approval
- 1996-06-20
- History
-
- ANSI Approved:
- 1997-01-06
- ANSI Withdrawn Date:
- 2013-08-05
- Published:
- 1996-11-30
- Reaffirmed:
- 2002-12-11
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.19.03 - Bushing - Req. & Testing of DC Bushings Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Eric Weatherbee
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P65700-19-03
IEEE/IEC Draft Standard - Bushings for DC Application
This International Standard applies to outdoor and indoor bushings of any voltage used on dc systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air to air dc bushings. This standard does not apply to the following: - cable terminations (potheads); - bushings for instrument transformers; - bushings for test power supplies; - bushings applied with gaseous insulation(other than air at atmospheric pressure) external to the bushing; - bushings for industrial application; - bushings for traction application; - bushings for distribution class transformers; This standard makes reference to IEC 60137 for general terms and conditions and defines the special terms used, operating conditions, ratings, test procedures as well as general mechanical and electrical requirements for bushings for dc application.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
65700-19-03-2014
IEC/IEEE International Standard -- Bushings for DC application
In this first edition of IEC/IEEE 65700-19-03, service experiences as well as established market requirements have been harmonized with existing IEC and IEEE standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.19.03-1996/Cor 1-2005
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications - Corrigendum 1
This corrigendum corrects IEEE Std C57.19.03-1996. The standard applies to outdoor and indoor power apparatus dc bushings of condenser type that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air dc bushings. This standard defines the special terms used, service conditions, rating, general requirements, electrical insulation characteristics, and test procedure for the bushings for dc application
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards