Electrical, dimensional, and related requirements for power transformer and reactor bushings that have basic impulse insulation levels (BILs) of 150 kV and above are covered. Specific values for dimensional and related requirements that are to be interpreted, measured, or tested, in accordance with IEEE Std C57.19.00™, are provided.
- Sponsor Committee
- PE/TR - Transformers
- Status
- Active Standard
- PAR Approval
- 2010-12-08
- Superseding
- C57.19.01-2000
- Board Approval
- 2017-12-06
- History
-
- ANSI Withdrawn Date:
- 2024-05-30
- Published:
- 2018-07-12
Working Group Details
- Society
- IEEE Power and Energy Society
- Sponsor Committee
- PE/TR - Transformers
- Working Group
-
WGC57.19.01 - Bushing - Performance Characteristics Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Shibao Zhang
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.19.01
Standard for Performance Characteristics and Dimensions for Power Transformer and Reactor Bushings
This standard covers electrical, dimensional, and related requirements for outdoor power apparatus bushings that have basic lightning impulse insulation levels (BILs) of 110 kV and above. It provides specific values for dimensional and related requirements that are to be interpreted, measured, or tested in accordance with IEEE Std C57.19.00™. Bushings covered by this standard are intended for use in free air as components of liquid-immersed transformers and reactors.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.19.01-1991
IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
Superseded by C57.19.01-2000 Electrical, dimensional, and related requirements for outdoor power-class apparatus bushings that have basic impulse insulation levels of 110 kV and higher are covered. Specific values for dimensional and related requirements that are to be interpreted, measured, or tested in accordance with IEEE C57.19.00-1991 are provided. Bushings covered by this standard are intended for use as components of oil-filled transformers, oil-filled reactors, and oil circuit breakers
C57.19.01-2000
IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
Electrical, dimensional, and related requirements for outdoor power apparatus bushings that have basic impulse insulation levels (BILs) of 200 kV and above are covered. Specific values for dimensional and related requirements that are to be interpreted, measured, or tested, in accordance with IEEE Std C57.19.00-1991, are provided.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards