This standard applies to power apparatus bushings that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled transformers and oil-filled reactors. Keywords: apparatus bushings, bushings, oil-filled reactors, oil-filled transformers
- Standard Committee
- PE/TR - Transformers
- Status
- Inactive-Reserved Standard
- PAR Approval
- 1996-06-20
- Superseded by
- C57.19.00-2023
- Superseding
- C57.19.00-1991
- Board Approval
- 2004-12-08
- History
-
- ANSI Approved:
- 2005-04-13
- Published:
- 2005-06-08
- Reaffirmed:
- 2010-12-08
- Inactivated Date:
- 2021-03-25
Additional Resources
- Erratas
- C57.19.00-2004_errata.pdf
- Interpretation
- C57.19.00-2004_interp.pdf
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.19.00 - Bushing - Gen. Req. of Bushings Working Group
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Peter Zhao
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.19.00-2023
IEEE Standard for General Requirements and Test Procedure for Power Apparatus Bushings
Bushings that have basic impulse insulation levels of above 110 kV for use as components of liquid-immersed transformers and liquid-immersed reactors are addressed by this standard.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.19.00-1976
General Requirements and Test Procedures for Outdoor Apparatus Bushings
C57.19.00-1991
IEEE Standard General Requirements and Test Procedure for Outdoor Power Apparatus Bushings
Service conditions, rating, general requirements, and test procedures for outdoor apparatus bushings are set forth. They apply to outdoor power apparatus bushings that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled transformers, oil-filled reactors, and oil circuit breakers. The following are not covered: high-voltage-cable terminations (potheads), bushings for instrument transformers, bushings for test transformers, bushings in which the internal insulation is provided by a gas, bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing, bushings for distribution-class circuit breakers and transformers, bushings for automatic circuit reclosures and line sectionalizers, and bushings for oil-less and oil-poor apparatus.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards