Electrical, mechanical, and safety requirements are set forth for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard is a basis for the establishment of performance, limited electrical and mechanical interchangeability, and safety requirements of equipment described; and for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step-voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
- Standard Committee
- PE/TR - Transformers
- Status
- Superseded Standard
- PAR Approval
- 2001-06-14
- Superseded by
- C57.12.00-2010
- Superseding
- C57.12.00-2000
- Board Approval
- 2006-09-15
- History
-
- ANSI Approved:
- 2007-01-26
- Published:
- 2007-02-28
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
WGC57.12.00 - Standards - Working Group on the Continuous Revision of C57.12.00
- IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Eric Davis
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.12.00
Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
This standard describes electrical and mechanical requirements of liquid-immersed distribution and power transformers, and autotransformers and regulating transformers, single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard applies to all liquid-immersed distribution, power, and regulating transformers that do not belong to the following types of apparatus: a) Instrument transformers; b) Step voltage and induction voltage regulators; c) Arc furnace transformers; d) Rectifier transformers; e) Specialty transformers; f) Grounding transformers; g) Mobile transformers; h) Mine transformers
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.12.00-2021
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.00-1968
USA Standard General Requirements for Distribution, Power and Regulating Transformers, and Shunt Reactors
This standard was revised and greatly expanded in 1948, 1949, and 1956. The 1956 edition was comprised of a revision and editorial consolidation of the preceding standards on distribution, power , and regulating transformers, namely American Standard Requirements for Distribution, Power , and Regulating Transformers, and Reactors Other Than Current-Limiting Reactors, C57.12-1949, American Standard Test Code for Distribution , Power, and Regulating Transformers , C57.22-1948, and American Standard Requirements for Transformers-67,000 Volts and Below; 501 Through 10,000 kva, 3 Phase ; 501 Through 5,000 kva, 1 Phase, C57.12a-1954. In addition, in order to eliminate cross-references wherever possible, the consolidation contained excerpts from other standards of the C57 family
C57.12.00-2000
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Superseded by IEEE Std C57.12.00-2006 Electrical,mechanical,and safety requirements are set forth for liquid-immersed distribution and power transformers,and autotransformers and regulating transformers; single and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard is a basis for the establishment of performance,limited electrical and mechanical interchangeability, and safety requirements of equipment described;and for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step-voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2010
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single- and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2015
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and auto-transformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards