Mechanical operations tests that are applicable for all equipment covered by the complete standard, IEEE Std IEEE C37.30.1(TM)-2011, are covered in this amendment. It further defines criteria for acceptance at the completion of the tests.
- Standard Committee
- PE/SWG - Switchgear
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2015-10-26
- Board Approval
- 2017-05-18
- History
-
- Published:
- 2017-08-18
- Inactivated Date:
- 2022-03-24
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SWG - Switchgear
- Working Group
-
HVS/C37.30.1 - C37.30.1 - Standard Requirements For High Voltage Air Switches And Interrupting Switches for Alternating Current, Rated Above 1,000 Volts
- IEEE Program Manager
- Jennifer Santulli
Contact Jennifer Santulli - Working Group Chair
- Jacob Blake
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C37.30.1-2022
IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
Required ratings, construction requirements, design test requirements, applications, and suggested practices for all high-voltage enclosed indoor and outdoor and non-enclosed indoor and outdoor switches rated above 1000 V are specified. This includes ratings and requirements for such switches as disconnecting, selector, horn-gap, grounding, etc., for manual and power operation, except for interrupter switches, distribution-enclosed single-pole air switches, and distribution cutouts fitted with disconnecting blades.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C37.30.1-2011
IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
Required ratings, construction requirements, design test requirements, applications, and suggested practices for all high-voltage enclosed indoor and outdoor and non-enclosed indoor and outdoor switches rated above 1000 V are specified. This includes ratings and requirements for such switches as disconnecting, selector, horn-gap, and grounding for manual and power operation, except for interrupter switches, distribution-enclosed single-pole air switches, and distribution cutouts fitted with disconnecting blades. Supersedes IEEE Std C37.30-1997, IEEE Std C37.32-2002, IEEE Std C37.34-1994, IEEE Std C37.35-1995, IEEE Std C37.36b-1990, IEEE Std C37.37-1996.