The guide is intended to assist protection engineers in applying relays and relaying schemes for protection against stator ground faults on various generator grounding schemes. The existing guide is outdated due to rapid technology development. Hence, the revised guide includes new stator ground protection principles that have evolved with the use of new technologies in relay designs. Additional application examples are included, and other issues raised by the users are also addressed. The guide is not intended for the selection of generator or ground connection schemes. IEEE Std C37.101-1993/Incorporates IEEE Std C37.101-2006/Cor1:2007.
- Standard Committee
- PE/PSRCC - Power System Relaying and Control
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2000-06-21
- Superseding
- C37.101-1993
- Corrigendum
-
C37.101-2006/Cor 1-2007
- Board Approval
- 2006-09-15
- History
-
- ANSI Approved:
- 2007-02-01
- Published:
- 2007-11-15
- Reaffirmed:
- 2011-12-07
- Inactivated Date:
- 2022-03-24
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/PSRCC - Power System Relaying and Control
- Working Group
-
C37.101_WG - (Inactive) Generator Ground Protection
- IEEE Program Manager
- Malia Zaman
Contact Malia Zaman
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C37.101-1985
IEEE Guide for Generator Ground Protection
This guide has been prepared to aid in the application of relays and relaying schemes for the protection of synchronous generators for single-phase-to- ground faults in the stator winding. The guide is not intended for the selection of generator or ground connection schemes. The information included in the main body is limited to those generator connections, grounding practices, and protective schemes generally used in North America. Appendix A provides information on some of the protective schemes in use elsewhere in the world and on schemes which are not in wide-spread use throughout North America. Appendix B provides examples of how to calculate ground overcurrent and overvoltage relay settings for the various protective schemes (and how to coordinate them with voltage transformer secondary fuses. Appendix C is a bibliography of available literature on the ground-fault problem from which source material was drawn. Recommended protective schemes and the arrangements in which they may be applied are indicated in Table 1. The use of this table is described in Section 3 with supporting information provided in subsequent sections.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C37.101-2006/Cor 1-2007
IEEE Guide for Generator Ground Protection - Corrigendum 1: Annex A.2 Phasor Analysis (Informative)
Errors identified in IEEE Std C37.101-2006 are addressed in this corrigendum.