In this amendment to IEEE Std 802.11-2020, standardized modifications to both the IEEE 802.11 physical layer (PHY) and the IEEE 802.11 medium access control (MAC) sublayer are defined to enable at least one mode of operation capable of supporting a maximum throughput of at least 20 gigabits per second (measured at the MAC data service access point), while maintaining or improving the power efficiency per station.
- Standard Committee
- C/LAN/MAN - LAN/MAN Standards Committee
- Status
- Superseded Standard
- PAR Approval
- 2015-03-26
- Board Approval
- 2021-03-25
- History
-
- Published:
- 2021-07-28
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/LAN/MAN - LAN/MAN Standards Committee
- Working Group
-
802.11 WG - Wireless LAN Working Group
- IEEE Program Manager
- Christy Bahn
Contact Christy Bahn - Working Group Chair
- Robert Stacey
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P802.11bf
IEEE Draft Standard for Information Technology -- Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks -- Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 4: Enhancements for Wireless Local Area Network (WLAN) Sensing
This amendment defines modifications to the IEEE 802.11 medium access control (MAC); the physical layer (PHY) service interface of High Efficiency (HE) and Extremely High Throughput (EHT) PHYs; and to the Directional Multi Gigabit (DMG) and enhanced DMG (EDMG) PHYs to enhance Wireless Local Area Network (LAN) sensing operation in license-exempt frequency bands between 1 GHz and 7.125 GHz and above 45 GHz.
P802.11bi
Standard for Information Technology--Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Enhanced Service with Data Privacy Protection
This amendment specifies modifications to the IEEE Std 802.11 medium access control (MAC) specification to specify new mechanisms that address and improve user privacy.
P802.11bk
Standard for Information Technology--Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: 320MHz Positioning
This amendment defines modifications to both the IEEE 802.11 medium access control layer (MAC) and physical layers (PHY). Compared to IEEE Std 802.11™-REVme, it enhances the Fine Timing Measurement protocol to make use of 320 MHz wide channels available with the IEEE 802.11be PHY and MAC.
P802.11bn
IEEE Standard for Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: Enhancements for Ultra High Reliability
This amendment defines modifications to both the IEEE Std 802.11 physical layer (PHY) and the IEEE Std 802.11 Medium Access Control (MAC). The amendment specifies enhancements for an Ultra High Reliability capability in a Wireless Local Area Network (WLAN). The Ultra High Reliability capability is defined for both an isolated Basic Service Set (BSS) and overlapping BSSs as: • at least one mode of operation capable of increasing throughput by 25%, as measured at the MAC data service Access Point, in at least one Signal to Interference and Noise Ratio (SINR) level (Rate-vs-Range), compared to the Extremely High Throughput MAC/PHY operation, and • at least one mode of operation capable of reducing latency by 25% for the 95th percentile of the latency distribution compared to the Extremely High Throughput MAC/PHY operation and • at least one mode of operation capable of reducing MAC Protocol Data Unit (MPDU) loss by 25% compared to the Extremely High Throughput MAC/PHY operation for a given scenario, especially for transitions between BSSs. This amendment provides a mechanism to reduce power consumption for Access Points (APs) (including mobile APs) and improved Peer-to-Peer (P2P) operation compared to the Extremely High Throughput MAC/PHY operation. This amendment applies to carrier frequency operation between 1 GHz and 7.250 GHz. This amendment provides for backward compatibility and coexistence with legacy IEEE 802.11 devices in the 2.4 GHz, 5 GHz and 6 GHz unlicensed bands.
P802.11bp
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Enhancements for Ambient Power Communication (AMP)
This amendment defines modifications to both the IEEE 802.11 Medium Access Control layer (MAC) and Physical Layers (PHY) to enable the operation of an Ambient Power communication (AMP) station (STA) that is powered using energy harvesting. Operation in sub-1 Gigahertz (GHz) and 2.4 GHz is defined. Specifically, at least one mode of data communication in the sub-1 GHz band is defined and at least one mode of data communication in the 2.4 GHz band with the AMP communication access category (AC) being set to AC_BK (background) is defined. At least one mode of wireless power transfer in the sub-1 GHz band is defined to support RF energy harvesting. This amendment defines mechanisms for the coexistence of an AMP STA and deployed STAs compliant with IEEE Std 802.11™-2020 that operate in the same radio frequency band as the AMP STA.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
802.11-2024
IEEE Draft Standard for Information Technology -- Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks -- Specific Requirements - Part 11: Wireless Local Area Network (LAN) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision. Amendments 1 to xxx published in 2020 and xxx have also been incorporated into this revision.
802.11be-2024
IEEE Draft Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Enhancements for Extremely High Throughput (EHT)
This amendment defines standardized modifications to both the IEEE Std 802.11 physical layers (PHY) and the Medium Access Control Layer (MAC) that enable at least one mode of operation capable of supporting a maximum throughput of at least 30 Gbps, as measured at the MAC data service access point (SAP), with carrier frequency operation between 1 and 7.250 GHz while ensuring backward compatibility and coexistence with legacy IEEE Std 802.11 compliant devices operating in the 2.4 GHz, 5 GHz, and 6 GHz bands. This amendment defines at least one mode of operation capable of improved worst case latency and jitter.
802.11bh-2024
IEEE Draft Standard for Information Technology--Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Operation with Randomized and Changing MAC Addresses
This amendment specifies modifications to the IEEE Std 802.11 medium access control (MAC) sublayer mechanisms to preserve the existing services that might otherwise be restricted in environments where STAs in an extended service set (ESS) use randomized or changing MAC addresses, without affecting the privacy of the users corresponding to the STAs. User privacy includes exposure of trackable information to third parties or exposure of an individual's presence of behavior.nThis amendment introduces mechanisms to enable session continuity in the absence of unique MAC address-to-STA mapping. For STAs in an ESS that use randomized or changing MAC addresses, this amendment preserves the ability to provide customer support, conduct network diagnostics and troubleshooting, and detect device arrival in a trusted environment
8802-11-2022
ISO/IEC/IEEE - International Standard - Telecommunications and information exchange between systems--Specific requirements for local and metropolitan area networks--Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2016 and 2018 have also been incorporated into this revision.
8802-11-2018/Amd3-2020
ISO/IEC/IEEE Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 11:Wireless LAN medium access control (MAC) and physical layer (PHY) specifications - AMENDMENT 3: Enhancements for very high throughput to support Chinese millimeter wave frequency bands (60 GHz and 45 GHz)
The IEEE 802.11 directional multi-gigabit (DMG) physical layer (PHY) and the medium access control (MAC) layer are modified by this amendment to IEEE Std 802.11-2016 to enable operation in the Chinese millimeter wave frequency band around 60 GHz. This amendment also defines modifications to the IEEE 802.11 PHY and MAC layer to enable operation in the Chinese millimeter wave frequency band around 45 GHz.
8802-11-2018/Amd4-2020
ISO/IEC/IEEE International Standard --Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications - AMENDMENT 4: Enhancements for transit links within bridged network
Protocols, procedures, and managed objects to enhance the ability of IEEE 802.11(TM) media to provide transit links internal to IEEE 802.1Q(TM) bridged networks are specified in this amendment to IEEE Std 802.11(TM)-2016.
8802-11-2018/Amd5-2020
IEEE/ISO/IEC International Standard - -Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications AMENDMENT 5: Preassociation discovery
Modifications to IEEE Std 802.11(TM)-2016, above the physical layer (PHY), to enable delivery of preassociation service discovery information to IEEE 802.11 stations (STAs) are defined in this amendment.
8802-11:2012/Amd.1:-2014
ISO/IEC/IEEE International Standard Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management Frames
A mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified in this amendment.
8802-11:2012/Amd.3:-2014
ISO/IEC/IEEE International Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz Band (adoption of IEEE Std 802.11ad-2012)
This amendment defines modifications to both the IEEE 802.11 physical layers (PHYs)and the IEEE 802.11 medium access control layer (MAC) to enable operation in frequencies around 60 GHz and capable of very high throughput.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
802.11-1999
IEEE Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan Area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
This standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant management items have been removed, and Annex D has been completed with the Management Information Base according to SNMP. Minor changes have been made throughout the document.
802.11-2007
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions. It also incorporates Amendments 1 through 8 including a corrigendum.
802.11-2012
IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions. It also incorporates Amendments 1 to 10 published in 2008 to 2011.
802.11-2016
IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2012 and 2013 have also been incorporated into this revision.
802.11-2020
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2016 and 2018 have also been incorporated into this revision. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11-2020/Cor 1-2022
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Corrigendum 1 -- Correct IEEE 802.11ay Assignment of Protected Announce Support bit
A change to IEEE Std 802.11 for wireless local area networks (WLANs) that corrects an error in the position of the Protected Announce Support field in the Extended RSN Capabilities field in the RSN Extension element. (The PDF of this standard is available at not cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11-2020/Cor 2-2024
IEEE Approved Draft Standard for Information Technology -Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Corrigendum 2 Correct the Number Assignment of the Information Identifier (ID) for Enhanced Broadcast Services (EBCS) element of the Access Network Query Protocol (ANQP)
A change to IEEE Std 802.11 for wireless local area networks (WLANs) that corrects an error in the number used for the information identifier (ID) for the EBCS element of the access network query protocol (ANQP). IEEE P802.11-2020/Cor 2-2024 was approved on February 15, 2024. This corrigendum is included in IEEE Std 802.11bc-2023 and was not published as a separate document.
802.11a-1999
IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 11: Wireless Medium Access Control (MAC) and physical layer (PHY) specifications: High Speed Physical Layer in the 5 GHz band
Changes and additions to IEEE Std. 802.11-1999 are provided to support the new highrate physical layer (PHY) for operation in the 5 GHz band.
802.11aa-2012
IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: MAC Enhancements for Robust Audio Video Streaming
Amendment to IEEE Std 802.11(TM)-2012. This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) for robust audio video (AV) streaming, while maintaining coexistence with other types of traffic.
802.11ac-2013
IEEE Standard for Information technology--Telecommunications and information exchange between systems–Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications--Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz.
The purpose of this amendment is to improve the IEEE 802.11 wireless local area network (WLAN) user experience by providing significantly higher basic service set (BSS) throughput for existing WLAN application areas and to enable new market segments for operation below 6 GHz including distribution of multiple multimedia/data streams.
802.11ad-2012
IEEE Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz Band
This amendment defines modifications to both the IEEE 802.11 physical layers (PHYs) and the IEEE 802.11 medium access control layer (MAC) to enable operation in frequencies around 60 GHz and capable of very high throughput.
802.11ae-2012
IEEE Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management Frames
A mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified in this amendment.
802.11af-2013
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Television White Spaces (TVWS) Operation
Enhancements to the IEEE 802.11 physical layers (PHYs) and medium access control (MAC) sublayer to support operation in the white spaces in television bands are defined.
802.11ah-2016
IEEE Standard for Information technology--Telecommunications and information exchange between systems - Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Sub 1 GHz License Exempt Operation
Modifications to both the IEEE 802.11(TM) physical layer (PHY) and the medium access control (MAC) sublayer to enable operation of license-exempt IEEE 802.11 wireless networks in frequency bands below 1 GHz, excluding the television (TV) White Space bands, with a transmission range up to 1 km and a minimum data rate of at least 100 Kb/s are defined in this amendment.
802.11ai-2016
IEEE Standard for Information technology--Telecommunications and information exchange between systems - Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Fast Initial Link Setup
Mechanisms that provide IEEE Std 802.11 networks with fast initial link setup methods that do not degrade the security offered by Robust Security Network Association (RSNA) already defined in IEEE Std 802.11 are defined in this amendment.
802.11aj-2018
IEEE Standard for Information Technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput to Support Chinese Millimeter Wave Frequency Bands(60 GHz and 45 GHz)
The IEEE 802.11™ directional multi-gigabit (DMG) physical layer (PHY) and the medium access control (MAC) layer are modified by this amendment to IEEE Std 802.11™-2016 to enable operation in the Chinese millimeter wave frequency band around 60 GHz. This amendment also defines modifications to the IEEE 802.11 PHY and MAC layer to enable operation in the Chinese millimeter wave frequency band around 45 GHz.
802.11ak-2018
IEEE Standard for Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Enhancements for Transit Links Within Bridged Networks
Protocols, procedures, and managed objects to enhance the ability of IEEE 802.11 media to provide transit links internal to IEEE 802.1Q bridged networks are specified in this amendment to IEEE Std 802.11-2016.
802.11aq-2018
IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Preassociation Discovery
Modifications to IEEE Std 802.11™-2016, above the physical layer (PHY), to enable delivery of preassociation service discovery information to IEEE 802.11 stations (STAs) are defined in this amendment., above the physical layer (PHY), to enable delivery of preassociation service discovery information to IEEE Std 802.11 stations (STAs).
802.11ax-2021
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Enhancements for High-Efficiency WLAN
Modifications to both the IEEE 802.11 physical layer (PHY) and medium access control (MAC) sublayer for high-efficiency operation in frequency bands between 1 GHz and 7.125 GHz are defined in this amendment to IEEE Std 802.11-2020. (The PDF of this standard is available at no cost to you via the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11az-2022
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Enhancements for Positioning
This amendment defines modifications to both the IEEE 802.11 medium access control layer (MAC) and physical layers (PHY). Compared to IEEE Std 802.11-2020 it enables absolute and relative position estimation with higher accuracy, and reduces wireless medium utilization and power consumption, is scalable to dense deployments, and includes security features. (The PDF of this standard is available at not charge compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11b-1999
IEEE Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Higher Speed Physical Layer (PHY) Extension in the 2.4 GHz band
Changes and additions are provided for IEEE Std 802.11b-1999 to support the higher rate Physical Layer for operation in the 2.4 GHz band.
802.11b-1999/Cor 1-2001
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Higher Speed Physical Layer (PHY) Extension in the 2.4 GHz Band - Corrigendum 1
Changes and additions are provided for IEEE Std 802.11b-1999 to support the higher rate Physical Layer for operation in the 2.4 GHz band.
802.11ba-2021
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems--Local and Metropolitan Area Networks-Specific Requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 3: Wake-Up Radio Operation
This amendment defines modifications to both the IEEE 802.11 physical layer (PHY) and the IEEE 802.11 medium access control (MAC) sublayer for wake-up radio operation. (The PDF of this standard is available at no cost to you complements of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11bb-2023
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 6: Light Communications
Modifications to existing physical layers (PHYs) and the medium access control layer (MAC) that enable transparent operation of IEEE 802.11 over the light in the 800 nm to 1000 nm band are specified in this amendment. This amendment specifies PHYs that provide bidirectional operations that achieve a minimum and maximum throughput of 10 Mb/s and 9.6 Gb/s, respectively, as measured at the MAC data service access point (SAP), and facilitate interoperability among solid-state light sources with different modulation bandwidths. Note: The PDF of the standard is available at no charge compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68.
802.11bc-2023
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 7: Enhanced Broadcast Services
Modifications to the IEEE 802.11 medium access control layer (MAC) for the enhanced transmission and reception of broadcast content, both while associated with an infrastructure basic service set (BSS) and while not associated with an infrastructure BSS, are defined in this amendment. 802.11-2020/Cor 2-2024 was approved on February 15, 2024. This is included in this PDF and is not publishing as a separate document. (The PDF of this standard is available at no cost compliments of the IEEE GET program located at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11bd-2022
IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Next Generation V2X
This amendment defines modifications to both the IEEE 802.11 physical layer (PHY) and the medium access control (MAC) sublayer for next generation vehicle-to-everything (V2X) communication in the 5.9 GHz and 60 GHz frequency bands.(The PDF of this standard is available at no charge compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)
802.11c-1998
IEEE Standard for Information Technology - Telecommunications and information exchange between systems - Local area networks - Media access control (MAC) bridges - Supplement for support by IEEE 802.11
To add a subclause under 2.5 Support of the Internal Sublayer Service by specific MAC Procedures to cover bridge operation with IEEE 802.11 MACs. This supplement to IS 10038 (802.1D) will be developed by the 802.11 Working Group in cooperation with the 802.1 Working Group.
802.11d-2001
IEEE Standard for Information technology -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Specification for operation in additional regulatory domains
This amendment specifies the extensions to IEEE Std 802.11(M) for Wireless Local Area Networks providing specifications for conformant operation beyond the original six regulatory domains of that standard. These extensions provide a mechanism for an IEEE Std 802.11 access point to deliver the required radio transmitter parameters to an IEEE Std 802.11 mobile station, which allows that station to configure its radio to operate within the applicable regulations of a geographic or political subdivision. This mechanism is applicable to all IEEE Std 802.11 PHY types. A secondary benefit of the mechanism described in this amendment is the ability for an IEEE Std 802.11 mobile station to roam between regulatory domains
802.11e-2005
IEEE Standard for Information technology--Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 8: Medium Access Control (MAC) Quality of Service Enhancements
This amendment defines the medium access control (MAC) procedures to support local area network (LAN) applications with quality of service (QoS) requirements. The procedures include the transport of voice, audio, and video over IEEE 802.11 wireless LANs (WLANs).
802.11g-2003
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Further Higher Data Rate Extension in the 2.4 GHz Band
Changes and additions to IEEE Std 802.11, 1999 Edition, as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, and 802.11d-2001, are provided to support the further higher data rate extension for operation in the 2.4 GHz band.
802.11h-2003
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Spectrum and Transmit Power Management Extensions in the 5 GHz Band in Europe
IEEE Std 802.11h-2003 Part 11: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe
802.11i-2004
IEEE Standard for information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 6: Medium Access Control (MAC) Security Enhancements
This amendment defines security mechanisms for IEEE 802.11. It includes a definition of WEP for backward compatibility with the original standard, IEEE Std 802.11, 1999 Edition. It defines TKIP and CCMP, which provide more robust data protection mechanisms than WEP affords. This amendment introduces the concept of a security association into IEEE 802.11, and defines security association management protocols called the 4-Way Handshake and the Group Key Handshake. Finally, it specifies how IEEE 802.1X may be utilized by IEEE 802.11 LANs to effect authentication.
802.11j-2004
IEEE Standard for Information technology--Telecommunications and information exchange between systems-Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications--Amendment 7:4.9 GHz-5 GHz Operation in Japan
This amendment specifies the extensions to IEEE Std 802.11u00ae for Wireless Local Area Networks providing mechanisms for operation in the 4.9 GHz and 5 GHz bands in Japan. This amendment is based on IEEE Std 802.11, 1999 Edition (Reaff 2003), as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, 802.11d-2001, 802.11g-2003, 802.11h-2003, and 802.11i-2004.
802.11k-2008
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 1: Radio Resource Measurement of Wireless LANs
This amendment specifies the extensions to IEEE Std 802.11 for Wireless LANs providing mechanisms for Radio Resource Measurement.
802.11n-2009
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Higher Throughput
This amendment defines modifications to both the 802.11 physical layers (PHY) and the 802.11 Medium Access Control Layer (MAC) so that modes of operation can be enabled that are capable of much higher throughputs, with a maximum throughput of at least 100Mb/s, as measured at the MAC data service access point (SAP).
802.11p-2010
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 6: Wireless Access in Vehicular Environments
This amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing wireless communications while in a vehicular environment.
802.11r-2008
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Fast Basic Service Set (BSS) Transition
This amendment specifies the extensions to IEEE Std 802.11-2007 for wireless local area networks (WLANs) providing mechanisms for fast basic service set (BSS) transition.
802.11s-2011
IEEE Standard for Information Technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 10: Mesh Networking
This amendment describes protocols for IEEE 802.11 stations to form self-configuring multi-hop networks that support both broadcast/multicast and unicast data delivery.
802.11u-2011
IEEE Standard for Information Technology-Telecommunications and information exchange between systems-Local and Metropolitan networks-specific requirements-Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 9: Interworking with External Networks
This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) that support wireless local area network (WLAN) interworking with external networks. It enables higher layer functionalities to provide overall end-to-end solutions. The main goals of this amendment are aiding network discovery and selection, enabling information transfer from external networks, enabling emergency services, and interfacing subscription service provider networks (SSPNs) to IEEE 802.11 networks that support interworking with external networks.
802.11v-2011
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 8: IEEE 802.11 Wireless Network Management
This amendment provides Wireless Network Management enhancements to the IEEE 802.11 MAC, and PHY, extending radio measurements to effect a complete and coherent upper layer interface for managing IEEE 802.11 devices in wireless networks.
802.11w-2009
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements. Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Protected Management Frames
This amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for protecting management frames.
802.11y-2008
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: 3650-3700 MHz Operation in USA
This amendment defines enhancements to the IEEE 802.11 physical layer (PHY) and medium access control (MAC) to support operation in the 3650-3700 MHz band in the United States.
802.11z-2010
IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 7: Extensions to Direct-Link Setup (DLS)
This amendment provides direct-link setup enhancements to the IEEE 802.11 MAC and PHY, extending direct-link setup to be independent of the access point (AP), and adding power save capabilities. The direct-link setup is made independent of the AP by tunneling the protocol messages inside data frames.
8802-11:2012/Amd4-2015
ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications AMENDMENT 4
The purpose of this amendment is to improve the ISO/IEC/IEEE 8802.11(TM) wireless local area network (WLAN) user experience by providing significantly higher basic service set (BSS) throughput for existing WLAN application areas and to enable new market segments for operation below 6 GHz including distribution of multiple multimedia/data streams.
8802-11:2012/Amd5-2015
ISO/IEC/IEEE International Standard -- Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications AMENDMENT 5
Enhancements to the ISO/IEC/IEEE 8802.11(TM) physical layers (PHYs) and medium access control (MAC) sublayer to support operation in the white spaces in television bands are defined.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
802.11F-2003
IEEE Trial-Use Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 Operation
Recommended practices for implementation of an Inter-Access Point Protocol (IAPP) on a Distribution System (DS) supporting ISO/IEC 8802-11:1999 and IEEE 802.11 wireless local access network (WLAN) links are described. The recommended DS utilizes an IAP that provides the necessary capabilities to achieve multi-vendor Access Point (AP) interoperability within the DS. This IAPP is described for a DS consisting of IEEE 802u00ae LAN components utilizing an Internet Engineering Task Force (IETF) Internet Protocol (IP) environment. Throughout this recommended practice, the terms ISO/IEC 8802-11:1999, IEEE 802.11, and IEEE Std 802.11-1999 are used interchangeably to refer to the same document, ISO/IEC 8802-11:1999, and its amendments and supplements published at the time this recommended practice was adopted.
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards