Active PAR

IEEE/IEC P62209-3

IEC/IEEE Draft International Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 3: Vector measurement-based systems (Frequency range of 300 MHz to 6 GHz)

This part of IEC/IEEE 62209 specifies measurement protocols and test procedures for the reproducible measurement of peak spatial-average specific absorption rate (psSAR) induced inside a simplified model of a human head or body by radio-frequency (RF) transmitting devices, with a specified measurement uncertainty. Requirements are provided for psSAR assessment using vector measurement-based systems. A vector measurement-based system may have different technical solutions such as scanning system or an array system. Such systems determine the psSAR by three-dimensional (3D) field reconstruction within the volume of interest in accordance with the requirements herein for the measurement system, calibration, uncertainty assessment and validation methods. The protocols and procedures apply for the psSAR assessments covering a significant majority of people including children during use of wireless communication devices operated in close proximity to the head or body. This document is applicable to wireless communication devices intended to be used at a position near the human head or body at distances up to and including 200 mm. This document can be employed to evaluate SAR compliance of different types of wireless communication devices used next to the ear, in front of the face, mounted on the body, combined with other RF-transmitting or non-transmitting devices or accessories (e.g. belt-clip), or embedded in garments. The overall applicable frequency range is from 300 MHz to 6 GHz. The system validation procedures provided within this document cover frequencies from 300 MHz to 6 GHz. The wireless communication device categories covered include but are not limited to mobile telephones, cordless microphones, auxiliary broadcast devices and radio transmitters in personal computers, desktop and laptop devices, multi-band, multi-antenna, and push-to-talk devices.

Sponsor Committee
BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety
Status
Active PAR
PAR Approval
2023-02-15

Working Group Details

Society
IEEE SA Board of Governors
Sponsor Committee
BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety
Working Group
SC1 - TC34 Subcommittee 1
IEEE Program Manager
Patricia Roder
Contact Patricia Roder
Working Group Chair
Mark Douglas

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P62209-1528a

IEC/IEEE International Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) Amendment of IEC/IEEE 62209-1528:2020

In this amendment following items are addressed: n n 1.tHand Specific Absorption Rate (SAR): New sections with a) applicability check and b) test proceduren 2.tMotion sensors: New sections with a) SAR measurement procedure and b) Sensor validation annexn 3.tTime-Averaged SAR measurement procedure for algorithm validation (revised/updated).n 4.tSeparation distance & SAR Test reductionn 5.tProximity sensors

Learn More About P62209-1528a

P63184

IEC/IEEE Draft International Standard - Assessment methods of the human exposure to electric and magnetic fields from wireless power transfer systems - models, instrumentation, measurement and numerical methods and procedures (Frequency range of 1 kHz to 30 MHz)

The objective of this document is to specify the assessment methods to evaluate compliance of stationary and dynamic wireless power transfer (WPT) systems with electromagnetic human exposure guidelines (specific absorption rate (SAR), internal electric fields, or current density including contact currents). The frequency range covered by this document is from 1 kHz to 30 MHz. This version of the standard focuses on exposures from inductive WPT systems. Future versions will consider extended guidance for assessments of exposure from capacitive WPT systems.

Learn More About P63184

P63480

Standard for Assessment of Human Exposure to Electromagnetic Fields from Radiative Wireless Power Transfer Systems: Measurement and Computational Methods (Frequency Range of 30 MHz to 300 GHz)

This standard specifies methods to assess compliance of wireless power transfer (WPT) systems operating in the frequency range from 30 MHz to 300 GHz with electromagnetic guidelines on human exposure. This includes evaluation of the incident electric and magnetic field strength, incident power density, specific absorption rate, and absorbed power density at any distance at which the human body may be exposed, i.e., from the reactive near-field to the far-field region.

Learn More About P63480

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.