Active Standard

IEEE 519-2022

IEEE Approved Draft Standard for Harmonic Control in Electric Power Systems

Goals for the design of electrical systems that include both linear and nonlinear loads are established in this standard. The voltage and current waveforms that may exist throughout the system are described, and waveform distortion goals for the system designer are established. The interface between sources and loads is described as the point of common coupling and observance of the design goals will reduce interference between electrical equipment. This standard addresses steady-state limitations. Transient conditions exceeding these limitations may be encountered. This document sets the quality of power that is to be provided at the point of common coupling. This document does not cover the effects of radio-frequency interference; however, guidance is offered for wired telephone systems.

Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More
Status
Active Standard
PAR Approval
2021-09-23
Superseding
519-2014
Board Approval
2022-05-13

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More
Working Group
PQ-Harmonics_WG - P519_Recommended Practices and Requirements for Harmonic Control in Electric Power Systems
Learn More
IEEE Program Manager
Michael Kipness
Contact
Working Group Chair
David Zech

P519.1

Guide for Applying Harmonic Limits on Power Systems

This Guide provides example applications for applying harmonic limits on power systems. These applications will focus on the limits and procedures outlined in IEEE 519-2014.

Learn More

No Active Standards

519-1992

IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems

This guide applies to all types of static power converters used in industrial and commercial power systems. The problems involved in the harmonic control and reactive compensation of such converters are addressed, and an application guide is provided. Limits of disturbances to the ac power distribution system that affect other equipment and communications are recommended. This guide is not intended to cover the effect of radio frequency interference.

Learn More

519-2014

IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems

Goals for the design of electrical systems that include both linear and nonlinear loads are established in this recommended practice. The voltage and current waveforms that may exist throughout the system are described, and waveform distortion goals for the system designer are established. The interface between sources and loads is described as the point of common coupling and observance of the design goals will reduce interference between electrical equipment. This recommended practice addresses steady-state limitations. Transient conditions exceeding these limitations may be encountered. This document sets the quality of power that is to be provided at the point of common coupling. This document does not cover the effects of radio-frequency interference; however, guidance is offered for wired telephone systems.

Learn More

No Inactive-Withdrawn Standards
No Inactive-Reserved Standards
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.