Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of optical fiber systems for the entire facility are presented in this standard.
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2012-11-02
- Superseded by
- 487.2-2024
- Board Approval
- 2013-08-23
- History
-
- Published:
- 2013-09-20
- Inactivated Date:
- 2024-03-21
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Working Group
-
P487.2 WG - P487.2 Working Group
- IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- Percy Pool
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1692-2023
IEEE Guide for the Protection of Communication Installations from Lightning Effects
Methods and practices necessary to reduce the risk of damages to communications equipment within structures arising from lightning surges causing ground potential rise and similar potential differences are addressed in this guide.
487.2-2024
IEEE Draft Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of optical fiber systems for the entire facility are presented in this standard.
487.3-2014
IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities
Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of metallic wire-line components in part of the telecommunication circuit and optical fiber systems in the remainder of the telecommunication circuit are presented in this standard. Hybrid applications have an equipment junction between the metallic wire-line and the fiber cable, i.e., a wire-line-fiber cable junction (CFJ).
487.3a-2022
IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities - Amendment 1
Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of metallic wire-line components in part of the telecommunication circuit, and optical fiber systems in the remainder of the telecommunication circuit are presented in this standard. Hybrid applications have an equipment junction between the metallic wire-line and the optical fiber cable, i.e., a wire-line-fiber cable junction (CFJ).
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1692-2011
IEEE Guide for the Protection of Communication Installations from Lightning Effects
The document addresses methods and practices necessary to reduce the risk of damages to communications equipment within structures arising from lightning surges causing GPR (ground potential rise) and similar potential differences.
487.4-2013
IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers
Engineering design procedures for the electrical protection of communication facilities serving electric supply locations through the use of neutralizing transformers are presented in this standard.
487.5-2013
IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
Engineering design procedures for the electrical protection of communication facilities serving electric supply locations through the use of isolation transformers are presented in this standard. These isolation transformers are hard-wired (i.e., have no plug-in units and are not modular).
789-2013
IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
Information to assist in determining the electrical parameters of communication and control cables necessary to improve the overall reliability of these cables when used in high-voltage environments is the objective of this standard. There should be a very high probability (greater than 99%) that these cables will perform their intended function for specified periods of time in high-voltage interference conditions. The end result being more reliable communications over said cables. The information presented in this standard will apply equally to either new or existing [already installed] cables.