Superseded Standard

IEEE 383-2015

IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities

General requirements and methods for qualifying electric cables and splices for nuclear facilities are provided. Cable, wire, and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEEE Std 323(TM). However, this standard's requirements may be applied to the cable, wire and splices within these devices. For qualification of fiber optic cable, refer to IEEE Std 1682(TM).

Sponsor Committee
PE/NPEC - Nuclear Power Engineering Committee
Learn More About PE/NPEC - Nuclear Power Engineering Committee
Joint Sponsors
PE/IC
Status
Superseded Standard
PAR Approval
2011-03-31
Superseded by
383-2023
Superseding
383-2003
Board Approval
2015-09-03
History
ANSI Approved:
2016-09-14
Published:
2015-10-05

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/NPEC - Nuclear Power Engineering Committee
Learn More About PE/NPEC - Nuclear Power Engineering Committee
Working Group
WG_2.4 - Working Group on Cables and Splices
IEEE Program Manager
Christian Orlando
Contact Christian Orlando
Working Group Chair
Robert Konnik

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


383-2023

IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities

General requirements and methods for qualifying electric cables, and splices for nuclear facilities are provided in this standard. Cable, wire, and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEEE/IEC Std 60780-323™:2016. However, the requirements set in this standard may be applied to the cable and splices within these devices. For qualification of fiber optic cable, refer to IEEE Std 1682™.

Learn More About 383-2023

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


383-2003

IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

This standard provides general requirements, direction, and methods for qualifying Class1E electric cables, field splices, factory splices, and factory rework for service in nuclear power generating stations. Categories of cables covered are those used for power, control, and instrumentation services, including signal and communication cables. Field cables, wires, and splices are within the scope of this standard. Cables, wires, and splices within or integral to other devices(e.g., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable device standard or IEEE Std 323TM-1983, as appropriate. However, this standard's requirements may be applied to the wire and cable within these devices.

Learn More About 383-2003

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.