Standard and recommended practices for ensuring the quality of measured data for high-frequency electrical interconnect at frequencies up to 50 GHz are provided. This might include, but is not limited to recommending design of test fixtures, as well as methods and processes for ensuring the accuracy and consistency of measured data for signals with frequency content up to 50 GHz. The standard and general practice should be applicable for frequencies higher than 50 GHz as well. The methods and techniques contained herein have been validated only to 50 GHz as of this writing. NOTE: Additional files for this standard can be found at http://standards.ieee.org/wp-content/uploads/import/download/370-2020_downloads.zip. An errata can be found at https://standards.ieee.org/wp-content/uploads/import/documents/erratas/370-2020_errata.pdf. Open source information can be found at https://opensource.ieee.org/elec-char/ieee-370/.
- Standard Committee
- EMC/SDCom - Standards Development Committee
- Status
- Active Standard
- PAR Approval
- 2015-06-11
- Board Approval
- 2020-09-24
- History
-
- Published:
- 2021-01-08
- Open Source
- IEEE SA Open Source Project
- Open Source CLA
- BSD 3-Clause
Additional Resources
- Erratas
- 370-2020_errata.pdf
- Downloads
- 370-2020_downloads.zip
Working Group Details
- Society
- IEEE Electromagnetic Compatibility Society
- Standard Committee
- EMC/SDCom - Standards Development Committee
- Working Group
-
Elec_Char - Electrical Characterization of High Speed Interconnect
- IEEE Program Manager
- Jennifer Santulli
Contact Jennifer Santulli - Working Group Chair
- Xiaoning Ye
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards